Standout Papers

A fracture-resistant high-entropy alloy for cryogenic applications 2013 2026 2017 2021 4.5k
  1. A fracture-resistant high-entropy alloy for cryogenic applications (2014)
    Bernd Gludovatz, Anton Hohenwarter et al. Science
  2. High-entropy alloys (2019)
    E.P. George, Dierk Raabe et al. Nature Reviews Materials
  3. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy (2013)
    F. Otto, A. Dlouhý et al. Acta Materialia
  4. Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures (2014)
    Zhenggang Wu, Hongbin Bei et al. Acta Materialia
  5. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures (2016)
    Bernd Gludovatz, Anton Hohenwarter et al. Nature Communications
  6. High entropy alloys: A focused review of mechanical properties and deformation mechanisms (2019)
    E.P. George, W.A. Curtin et al. Acta Materialia
  7. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys (2013)
    F. Otto, Ying Yang et al. Acta Materialia
  8. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation (2015)
    Benjamin Schuh, Francisca Méndez Martín et al. Acta Materialia
  9. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi (2017)
    Guillaume Laplanche, Aleksander Kostka et al. Acta Materialia
  10. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy (2016)
    Guillaume Laplanche, Aleksander Kostka et al. Acta Materialia
  11. Tensile properties of high- and medium-entropy alloys (2013)
    A. Gali, E.P. George Intermetallics
  12. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys (2010)
    Jan Frenzel, E.P. George et al. Acta Materialia
  13. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures (2016)
    F. Otto, A. Dlouhý et al. Acta Materialia
  14. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys (2013)
    Zhenggang Wu, Hongbin Bei et al. Intermetallics
  15. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi (2015)
    Zijiao Zhang, Min Mao et al. Nature Communications
  16. The correlation of the indentation size effect measured with indenters of various shapes (2002)
    J.G. Swadener, E.P. George et al. Journal of the Mechanics and Physics of Solids
  17. Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy (2017)
    Zijiao Zhang, H. W. Sheng et al. Nature Communications
  18. Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy (2016)
    Norihiko L. Okamoto, Shu Fujimoto et al. Scientific Reports
  19. Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy (2014)
    Guillaume Laplanche, P. Gadaud et al. Journal of Alloys and Compounds
  20. Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin (2022)
    Dong Liu, Qin Yu et al. Science
  21. Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures (2018)
    C.E. Slone, Jessica Miao et al. Acta Materialia
  22. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries (2014)
    F. Otto, E.P. George et al. Intermetallics
  23. Phase stability and kinetics of σ-phase precipitation in CrMnFeCoNi high-entropy alloys (2018)
    Guillaume Laplanche, Sean P. Berglund et al. Acta Materialia
  24. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy (2018)
    Guillaume Laplanche, P. Gadaud et al. Journal of Alloys and Compounds
  25. Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy (2019)
    Mike Schneider, E.P. George et al. International Journal of Plasticity
  26. Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy (2021)
    Ying Yang, Tianyi Chen et al. Nature
  27. The emergent field of high entropy oxides: Design, prospects, challenges, and opportunities for tailoring material properties (2020)
    Brianna L. Musicó, Dustin A. Gilbert et al. APL Materials

Immediate Impact

50 from Science/Nature 350 standout
Sub-graph 1 of 9

Citing Papers

Ductilization of 2.6-GPa alloys via short-range ordered interfaces and supranano precipitates
2025 StandoutScience
Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy
2024 StandoutScience
194 intermediate papers

Works of E.P. George being referenced

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
2022 StandoutScience
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
and 67 more

Author Peers

Author Last Decade Papers Cites
E.P. George 34943 10107 23342 266 38.8k
Hongbin Bei 22344 8690 14794 292 25.7k
O.N. Senkov 28853 7309 20492 194 30.9k
D.B. Miracle 31824 11539 17851 237 34.3k
Zenji Horita 27498 29971 8210 552 34.3k
Peter K. Liaw 51172 16007 29266 1.1k 56.3k
Yuntian Zhu 36758 35985 9346 567 49.2k
C.T. Liu 47391 19104 20586 692 52.3k
Xiaozhou Liao 15715 17361 5325 360 24.8k
Jien‐Wei Yeh 29853 5554 24221 235 32.0k
David N. Seidman 15635 16981 10400 475 26.5k

All Works

Loading papers...

Rankless by CCL
2026