Citation Impact
Citing Papers
Design, Synthesis, Structure, and Gas (N 2 , Ar, CO 2 , CH 4 , and H 2 ) Sorption Properties of Porous Metal-Organic Tetrahedral and Heterocuboidal Polyhedra
2005 StandoutNobel
Luting cement-metal surface physicochemical interactions on film thickness
1994
A clinical comparison of different powder: liquid ratios of two glass ionomer cements on the retention of orthodontic molar bands
1989
Long‐term quantification of the release of monomers from dental resin composites and a resin‐modified glass ionomer cement
2002
Incorporation of antibacterial agent derived deep eutectic solvent into an active dental composite
2017
Effect of filler particle size and morphology on force/work parameters for stickiness of unset resin-composites
2009
Dental materials: 1996 literature review. Part 2
1998
The effect of filler and silane content on conversion of resin-based composite
2003
Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications
2013 Standout
Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins
2002 Standout
Adhesive layer properties as a determinant of dentin bond strength
2005
Rheological properties of resin composites according to variations in monomer and filler composition
2005
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
Evaluation of the interactions between amalgam, cement and gold castings
1992
Reduction of polymerization contraction stress for dental composites by two-step light-activation
2002
Effect of photoinitiator level on properties of a light-cured and post-cure heated model resin system
1997
Rheologic properties of flowable, conventional hybrid, and condensable composite resins
2003
Effect of esterase on methacrylates and methacrylate polymers in an enzyme simulator for biodurability and biocompatibility testing
1994
Network structures of Bis-GMA/TEGDMA resins differ in DC, shrinkage-strain, hardness and optical properties as a function of reducing agent
2011
Copper toxicity, oxidative stress, and antioxidant nutrients
2003 Standout
Volume contraction in photocured dental resins: The shrinkage-conversion relationship revisited
2005
The effects of temperature on the setting of glass ionomer (polyalkenoate) cements
1991
In vitro comparison of mechanical properties and degree of cure of bulk fill composites
2012
Rheological properties of flowable resin composites and pit and fissure sealants
2007
The stability of methacrylate biomaterials when enzyme challenged: Kinetic and systematic evaluations
2001
Leaching from glass ionomer cements
1994
Polymerisation characteristics of resin composites polymerised with different curing units
2004
Effects of particle size of silica filler on polymerization conversion in a light-curing resin composite
2011
The effect of specimen temperature on the polymerization of a resin-composite
2011
Comparison of Manufacturer‐Recommended Exposure Durations with Those Determined Using Biaxial Flexure Strength and Scraped Composite Thickness Among a Variety of Light‐Curing Units
2009
A classification of dental composites according to their morphological and mechanical characteristics
1992
Residual monomers (TEGDMA and Bis‐GMA) of a set visible‐light‐cured dental composite resin when immersed in water
1991
Resin composite—State of the art
2010 Standout
TiO2 Nanotubes: Synthesis and Applications
2011 Standout
Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins
1993
Is the soft-start polymerisation concept still relevant for modern curing units?
2009
Evaluation of methylene lactone monomers in dental resins
1992
Influence of filler addition to bonding agents on shear bond strength to bovine dentin
1995
Photopolymerization of dental composite matrices
1994
Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione
2008
Two-step curing: influence on conversion and softening of a dental polymer
2003
Hygroscopic and hydrolytic effects in dental polymer networks
2005 Standout
Photopolymerizable hydrogels for tissue engineering applications
2002 Standout
Evaluation of dental restorative composites containing polyhedral oligomeric silsesquioxane methacrylate
2004
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Energy dependent polymerization of resin-based composite
2002
Correlation of cytotoxicity, filler loading and curing time of dental composites
1991
Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins
2010
Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials
2007
Curing-light attenuation in filled-resin restorative materials
2005
A study of component release from resin pit and fissure sealants in vitro
1997
Corrosion degradation and prevention by surface modification of biometallic materials
2006
Cytotoxicity of a BIS‐GMA dental composite before and after leaching in organic solvents
1991
Analysis of camphorquinone in composite resins as a function of shade
2007
Polymer structure of a light‐cured resin composite in relation to distance from the surface
2003
Influence of selected components on crosslink density in polymer structures
2001
Hydroxyl radical release from dental resins: Electron paramagnetic resonance evidence
2010
Filler features and their effects on wear and degree of conversion of particulate dental resin composites
2005
Synthesis and photopolymerization of N,N′-dimethyl,-N,N′-di(methacryloxy ethyl)-1,6-hexanediamine as a polymerizable amine coinitiator for dental restorations
2002
Determination of double bond conversion in dental resins by near infrared spectroscopy
2001
Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans
2006 Standout
Rheological properties of experimental Bis-GMA/TEGDMA flowable resin composites with various macrofiller/microfiller ratio
2008
Root Canal Irrigants
2006 Standout
Calibration of FTIR conversion analysis of contemporary dental resin composites
1990
Light intensity effects on resin-composite degree of conversion and shrinkage strain
2000 Standout
Development of a new photoinitiation system for dental light-cure composite resins
1999
Organic leachables from polymer‐based dental filling materials
1999
Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development
1991
Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites
1998
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Determination of the optimal photoinitiator concentration in dental composites based on essential material properties
2009
Influence of composition on rate of polymerization contraction of light-curing resin composites
2002
Placing Dental Composites—A Stressful Experience
2008
Effect of filler content on the profile of released biodegradation products in micro-filled bis-GMA/TEGDMA dental composite resins
1999
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
2009 Standout
Degree of conversion and color stability of the light curing resin with new photoinitiator systems
2009
Curing Dental Resins and Composites by Photopolymerization
2000
Slumping during sculpturing of composite materials
2008
Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry
1998
How much do resin-based dental materials release? A meta-analytical approach
2011
Aggressiveness of contemporary self-etching systems
2001 Standout
In vitrocorrosion fatigue of 316L cold worked stainless steel
1992
Surface treatments of titanium dental implants for rapid osseointegration
2006 Standout
Effect of chain modifications on the physicomechanical properties of silsesquioxane‐based dental nanocomposites
2007
Electrochemical corrosion of titanium and titanium-based alloys
2001
Early Bond Strength of Luting Cements to a Precious Alloy
1992
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Effect of light exposure on fracture toughness and flexural strength of light-cured composites
1996
Competitive light absorbers in photoactive dental resin-based materials
2012
Effect of Stepped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite
2000
The micro-Raman spectroscopy, a useful tool to determine the degree of conversion of light-activated composite resins
1999
Fabrication methods of porous metals for use in orthopaedic applications
2006
Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials
2001
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays
2002
The influence of postcuring on the fracture properties of photo‐cured dimethacrylate based dental composite resin
1987
Effect of the hydrophilic nanofiller loading on the mechanical properties and the microtensile bond strength of an ethanol‐based one‐bottle dentin adhesive
2004
Controlled Microwave Heating in Modern Organic Synthesis
2004 Standout
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes
2012
Photoinitiation chemistry affects light transmission and degree of conversion of curing experimental dental resin composites
2006
Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications
2002
How light irradiance and curing time affect monomer conversion in light‐cured resin composites
2003
Dental luting agents: A review of the current literature
1998 Standout
Elution parameters and HPLC-detection of single components from resin composite
1999
Resin composites in dentistry: the monomer systems
1997 Standout
Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide
2011
Contraction stress of flowable composite materials and their efficacy as stress-relieving layers
2003
Thiol–Ene Click Chemistry
2010 Standout
Dentine permeability and dentine adhesion
1997
Donor impurity band exchange in dilute ferromagnetic oxides
2005 Standout
Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units
2005
Orthodontic biomaterials: from the past to the present.
2002
Note on the defect structure of rutile (TiO2)
1967
Recent developments in stainless steels
2009 Standout
Iron Catalysis in Organic Synthesis
2015 Standout
Understanding the kinetics and network formation of dimethacrylate dental resins
2001
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Physics of thin-film ferroelectric oxides
2005 Standout
Nonstoichiometry in Undoped BaTiO 3
1981
Conversion of dual cure luting cements
1995
NMR-analysis of monomers in restorative resins
1975
The role of impurities in insultating transition metal oxides
1984
Dependence of the Electrical Conductivity and Thermoelectric Power of Pure and Aluminum-Doped Rutile on Equilibrium Oxygen Pressure and Temperature
1963
Materials Science
1981
Relation of Dental Composite Formulations To Their Degradation and the Release of Hydrolyzed Polymeric-Resin-Derived Products
2001
Gravimetric studies of the defect structure of α-Nb2O5
1961
Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins
1985
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Polymeric materials for composite matrices in biological environments
1993
Contraction Stress Related to Degree of Conversion and Reaction Kinetics
2002
A Review: Fundamental Aspects of Silicate Mesoporous Materials
2012 Standout
Degree of double bond conversion in light-cured composites
1987
Corrosion fatigue of surgical stainless steel in synthetic physiological solution
1981
Photoelectrochemical properties of n-type NiTiO3
1982 StandoutNobel
Contraction Stress Related to Degree of Conversion and Reaction Kinetics
2002
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
2010 Standout
Biodegradation of Commercial Dental Composites by Cholesterol Esterase
1999
Thermogravimetric and electrical study of non-stoichiometric titanium dioxide TiO2−x, between 800 and 1100°C
1981
Time-dependent Deformation of Composite Resins — Compositional Considerations
1985
Mussel‐Inspired Polydopamine Coating as a Universal Route to Hydroxyapatite Crystallization
2010 Standout
A fast convenient method to prepare hybrid sol-gel materials with low volume-shrinkages
1996
The present status of dental titanium casting
1998
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Monomer Conversion of Pre-heated Composite
2005
Current Concepts On Adhesion To Dentin
1997
Dielectric breakdown in high-ε films for ULSI DRAMs
1993
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
Influence of Pulse-Delay Curing on Softening of Polymer Structures
2001
Deep Eutectic Solvents: A Review of Fundamentals and Applications
2020 Standout
Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins
2002
Concise Review Biomaterials & Bioengineering: Meta-analytical Review of Factors Involved in Dentin Adherence
2001
Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
2005 Standout
Composites for use in posterior teeth: Composition and conversion
1987
Stiffness Increase During the Setting of Dental Composite Resins
1987
Perspectives on Titanium Science and Technology
2013 Standout
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Straightforward Iron‐Catalyzed Synthesis of Nitriles by Dehydration of Primary Amides
2011
Correlative Transmission Electron Microscopy Examination of Nondemineralized and Demineralized Resin-Dentin Interfaces Formed by Two Dentin Adhesive Systems
1996
Dimethylformamide as a Carbon Monoxide Source in Fast Palladium-Catalyzed Aminocarbonylations of Aryl Bromides
2002
Biodegradation of Restorative Metallic Systems
1992
Influence of Incorporation of Antibacterial Monomer on Curing Behavior of a Dental Composite
1994
Updates on the development of nanostructured transition metal nitrides for electrochemical energy storage and water splitting
2017
Vickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments
2006
Metallic implant biomaterials
2014 Standout
Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C
2000 Standout
Biomaterials: Past Successes and Future Problems
2003
Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds
2015 Standout
Effects of Various Resin Composite (Co)monomers and Extracts on Two Caries-associated Micro-organisms in vitro
1998
A surface science perspective on TiO2 photocatalysis
2011 Standout
The surface science of titanium dioxide
2003 Standout
Oxygen nonstoichiometry (δ) of TiO2−δ-revisited
2004
Development of Dielectric Properties of Niobium Oxide, Tantalum Oxide, and Aluminum Oxide Based Nanolayered Materials
2001
Visco-elastic Parameters of Dental Restorative Materials during Setting
2000
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
SEMICONDUCTING PROPERTIES OF UNDOPED TiO 2
1997
Update on Dental Nanocomposites
2010
Intrinsic defects of TiO 2 O 2 H 2 O 2
1983
Investigation of failures in stainless steel orthopaedic implant devices: pit-induced fatigue cracks
1995
Effect of TEGDMA/BisGMA Ratio on Stress Development and Viscoelastic Properties of Experimental Two-paste Composites
2003
Polymerization Kinetics of Pre-heated Composite
2006
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
2000 StandoutNature
Comparative Study on Adhesive Performance of Functional Monomers
2004 Standout
Influence of Carboxylic Anhydrides on Selected Mechanical Properties of Heat-cured Resin Composites
1991
Works of E.H. Greener being referenced
The electrochemical activity of the oral cavity—a new approach
1985
Effect of food and oral simulating fluids on dentine bond and composite strength
1994
Effect of excitation energy on dentine bond strength and composite properties
1994
Fluoride release from glass ionomers used as luting agents
1988
Effect of photoinitiator on degree of conversion of unfilled light-cured resin
1994
Effects of food/oral simulating fluids on microstructure and strength of dentine bonding agents
1996
Detection of leached moieties from dental composites in fluid simulating food and saliva
1995
Non-linear in vitro wear of posterior composites with time
1991
Radiometric and spectroradiometric comparison of power outputs of five visible light-curing units
1993
Degree of conversion of seven visible light‐cured posterior composites
1988
Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin
1993
Laser acoustic emission thermal technique (LAETT): A technique for generating acoustic emission in dental composites
1996
Effect of food and oral simulating fluids on structure of adhesive composite systems
1995
Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins
1990
Thermogravimetric Analysis of Composite Restorative Resins
1972
Nonohmic Behavior in Near-Stoichiometric Rutile (TiO2)
1961
Fourier Transform Infrared Analysis of Degree of Polymerization in Unfilled Resins—Methods Comparison
1984
The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins
1986
Electrical Conductivity of Near-Stoichiometric α-Nb2O5 in the Temperature Range 900° to 1400°C
1963
Rheology of Composite Restoratives
1981
Ultrasonic Evaluation of Anterior Restorative Materials
1979
Polarization studies of surgical materials in ringer's solution
1970
Ultraviolet light-induced yellowing of dental restorative resins
1985
Electrical Conductivity of Single and Polycrystalline Near‐Stoichiometric Rutile in the Range 600° to 1400°C
1965
Electrical Conductivity of Near-Stoichiometric α-Nb2O5
1961
The academy of dental materials
1985
Effect of oxygen on the corrosion of dental amalgam
1985
Short-Term Bond Strengths Between Adhesive Cements and Dental Alloys
1974
In Vitro Corrosion Resistance of New Dental Alloys
1973
MATERIALS SCIENCE IN DENTISTRY
1974
Corrosion of Ferromagnetic Alloys used for Magnetic Retention of Overdentures
1987
The rheological properties of polyelectrolyte cements
1981
Studies of Ti alloys for dental castings
1989
The catalytic decomposition of secondary carboxamides by transition-metal complexes
1973