Citation Impact
Citing Papers
A thermal model for high speed motorized spindles
1999
Numerical analysis of pulverized coal combustion characteristics using advanced low-NOx burner
2003 StandoutNobel
Prediction of turbulent gas‐solid flow in a duct with a 90° bend using an Eulerian‐Lagrangian approach
2011
Digital Twin for rotating machinery fault diagnosis in smart manufacturing
2018 Standout
Influence of inclusion pairs, clusters and stringers on the lower bound of the endurance limit of bearing steels
2003
A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications
2014 Standout
New aspects in the realistic prediction of the fatigue life of rolling bearings
1989
Probabilistic Stress-Life (P-S-N) Study on Bearing Steel Using Alternating Torsion Life Test
2009
Bulk Parameterization of Air–Sea Fluxes: Updates and Verification for the COARE Algorithm
2003 Standout
Recent applications of big data analytics in railway transportation systems: A survey
2018 Standout
Modelling of rollers in calculation of slewing bearing with the use of finite elements
2006 Standout
On the Fatigue Life of M50 NiL Rolling Bearings
1992
Modeling the gas and particle flow inside cyclone separators
2007
Fuel droplet vaporization and spray combustion theory
1983
A review on machinery diagnostics and prognostics implementing condition-based maintenance
2005 Standout
Deep learning for smart manufacturing: Methods and applications
2018 Standout
On predicting particle-laden turbulent flows
1994
Optimization of the cyclone separator geometry for minimum pressure drop using mathematical models and CFD simulations
2010 Standout
Particle lagrangian simulation in turbulent flows
1990
Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall
2009
Recent research and development of combustion simulation
2001 StandoutNobel
Effect of surface texturing on lubrication film formation and rolling contact fatigue within mixed lubricated non-conformal contacts
2010
Rotating machinery prognostics: State of the art, challenges and opportunities
2008 Standout
Evolution of particle-laden jet flows - A theoretical and experimental study
1989
Droplet vaporization model for spray combustion calculations
1989 Standout
Components, formulations, solutions, evaluation, and application of comprehensive combustion models
1999
Production rates of sea‐spray droplets
1999
Application and experimental validation of a computational fluid dynamics (CFD)-based erosion prediction model in elbows and plugged tees
2004
Data Fitted Bearing Life Prediction Model for Variable Operating Conditions©
1999
Steels for bearings
2011 Standout
Application of multi-level multi-integration to contact problems Part 1: Non-Hertzian contact in rolling bearings
1999
Turbulent Dispersed Multiphase Flow
2010 Standout
Cyber-physical systems in manufacturing
2016 Standout
The effect of cyclone inlet dimensions on the flow pattern and performance
2010 Standout
Effects of hard turning on the fatigue life of ball bearings
2004
DAMAGE MECHANICS APPROACH FOR BEARING LIFETIME PROGNOSTICS
2002
A Study onP-S-NCurve for Rotating Bending Fatigue Test for Bearing Steel
2008
Particle-laden turbulent flows: direct simulation and closure models
1991
Cloud-enabled prognosis for manufacturing
2015
Turbulence closure modeling of the dilute gas‐particle axisymmetric jet
1986
Effects of moisture in coal on pulverized coal combustion characteristics
2001
An extensive review of vibration modelling of rolling element bearings with localised and extended defects
2015
A Maturity Model for Assessing Industry 4.0 Readiness and Maturity of Manufacturing Enterprises
2016 Standout
Large-Eddy Simulation of Heavy-Particle Transport in Turbulent Channel Flow
2006
Simulation of gas species and temperature separation in the counter-flow Ranque–Hilsch vortex tube using the large eddy simulation technique
2009 Standout
Analytical description of particle/droplet-laden turbulent flows
2003
On the interaction of particles and turbulent fluid flow
1988
Numerical approaches for motion of dispersed particles, droplets and bubbles
2000
Numerical study of gas–solid flow in a cyclone separator
2006
Structure of particle-laden jets - Measurements and predictions
1985
A Statistical Damage Mechanics Model for Subsurface Initiated Spalling in Rolling Contacts
2008
Mild Combustion
2004 Standout
Airflow and Particle Transport in the Human Respiratory System
2009
Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics - state of the art
2009
Contact mechanics of rough surfaces in tribology: multiple asperity contact
1998
Effect Of Roller Profile On Cylindrical Roller Bearing Life Prediction—Part I: Comparison of Bearing Life Theories
2001
The Effect of Hoop and Material Residual Stresses on the Fatigue Life of High Speed, Rolling Bearings
1992
A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings
2016 Standout
Airborne transmission of respiratory viruses
2021 StandoutScience
Discrete particle simulation of particulate systems: A review of major applications and findings
2008 Standout
Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat
2002 Standout
Eulerian and Lagrangian approaches for predicting the behaviour of discrete particles in turbulent flows
1999
Thermal issues in machine tools
2012 Standout
Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions
2010
Works of Ε. Ιωαννίδης being referenced
A New Fatigue Life Model for Rolling Bearings
1985
Endurance of Aircraft Gas Turbine Mainshaft Ball Bearings-Analysis Using Improved Fatigue Life Theory: Part 1—Application to a Long-Life Bearing
1990
Particle Deformation and Counterface Damage When Relatively Soft Particles are Squashed Between Hard Anvils
1989
Debris Damage in Rolling Bearings and Its Effects on Fatigue Life
1988
Endurance of Aircraft Gas Turbine Mainshaft Ball Bearings-Analysis Using Improved Fatigue Life Theory: Part 2—Application to a Bearing Operating Under Difficult Lubrication Conditions
1990
Aspects of computer simulation of liquid-fuelled combustors
1981
Increased Performance of Hybrid Bearings with Silicon Nitride Balls
1997
A Fast Solution of the Dry Contact Problem and the Associated Sub-Surface Stress Field, Using Multilevel Techniques
1991