Standout Papers

High-entropy alloys 2009 2026 2014 2020 3.3k
  1. High-entropy alloys (2019)
    E.P. George, Dierk Raabe et al. Nature Reviews Materials
  2. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off (2016)
    Zhiming Li, K.G. Pradeep et al. Nature
  3. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD (2010)
    M. Calcagnotto, Dirk Ponge et al. Materials Science and Engineering A
  4. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications (2009)
    Franz Roters, Philip Eisenlohr et al. Acta Materialia
  5. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes (2018)
    Zhifeng Lei, Xiongjun Liu et al. Nature
  6. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation (2017)
    Suihe Jiang, Hui Wang et al. Nature
  7. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging (2011)
    I. Gutiérrez‐Urrutia, Dierk Raabe Acta Materialia
  8. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures (2016)
    F. Otto, A. Dlouhý et al. Acta Materialia
  9. Steels in additive manufacturing: A review of their microstructure and properties (2019)
    Priyanshu Bajaj, Avinash Hariharan et al. Materials Science and Engineering A
  10. Design of a twinning-induced plasticity high entropy alloy (2015)
    Yun Deng, Cemal Cem Taşan et al. Acta Materialia
  11. The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel (2010)
    I. Gutiérrez‐Urrutia, Stefan Zaefferer et al. Materials Science and Engineering A
  12. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging (2010)
    M. Calcagnotto, Yoshitaka Adachi et al. Acta Materialia
  13. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution (2018)
    Hong Luo, Zhiming Li et al. Corrosion Science
  14. A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior (2017)
    Zhiming Li, Cemal Cem Taşan et al. Acta Materialia
  15. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility (2013)
    Mengji Yao, K.G. Pradeep et al. Scripta Materialia
  16. Grain boundary segregation engineering in metallic alloys: A pathway to the design of interfaces (2014)
    Dierk Raabe, Michael Herbig et al. Current Opinion in Solid State and Materials Science
  17. The relation between ductility and stacking fault energies in Mg and Mg–Y alloys (2012)
    Stefanie Sandlöbes, Martin Friák et al. Acta Materialia
  18. An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design (2015)
    Cemal Cem Taşan, Martin Diehl et al. Annual Review of Materials Research
  19. Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels (2006)
    Rongjie Song, Dirk Ponge et al. Materials Science and Engineering A
  20. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys (2021)
    Peijian Shi, Runguang Li et al. Science
  21. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations (2014)
    Cemal Cem Taşan, J.P.M. Hoefnagels et al. International Journal of Plasticity
  22. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel (2012)
    I. Gutiérrez‐Urrutia, Dierk Raabe Acta Materialia
  23. Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments (2012)
    David Steinmetz, Tom Jäpel et al. Acta Materialia
  24. Strategies for improving the sustainability of structural metals (2019)
    Dierk Raabe, Cemal Cem Taşan et al. Nature
  25. Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion (2018)
    Seok Su Sohn, Alisson Kwiatkowski da Silva et al. Advanced Materials
  26. Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability (2011)
    C. Herrera, Dirk Ponge et al. Acta Materialia
  27. Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one (2015)
    Duancheng Ma, Blazej Grabowski et al. Acta Materialia
  28. Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting (2017)
    Paraskevas Kontis, Eric A. Jägle et al. Acta Materialia
  29. On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloys (2010)
    Hauke Springer, Aleksander Kostka et al. Acta Materialia
  30. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys (2017)
    Zhiming Li, Cemal Cem Taşan et al. Scientific Reports
  31. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy (2018)
    Jing Su, Dierk Raabe et al. Acta Materialia
  32. Machine learning–enabled high-entropy alloy discovery (2022)
    Ziyuan Rao, Po‐Yen Tung et al. Science
  33. The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation (2015)
    D.T. Pierce, J.A. Jiménez et al. Acta Materialia
  34. Hydrogen-assisted decohesion and localized plasticity in dual-phase steel (2014)
    Motomichi Koyama, Cemal Cem Taşan et al. Acta Materialia
  35. Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel (2016)
    Emanuel David Welsch, Dirk Ponge et al. Acta Materialia
  36. High-strength Damascus steel by additive manufacturing (2020)
    Philipp Kürnsteiner, Markus Benjamin Wilms et al. Nature
  37. Assessment of geometrically necessary dislocation levels derived by 3D EBSD (2015)
    Peter Joachim Konijnenberg, Stefan Zaefferer et al. Acta Materialia
  38. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity (2017)
    Zhiming Li, Fritz Körmann et al. Acta Materialia
  39. Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties (2017)
    Zhiming Li, Dierk Raabe JOM
  40. Boron doped ultrastrong and ductile high-entropy alloys (2018)
    Jae Bok Seol, Jae Wung Bae et al. Acta Materialia
  41. A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion (2020)
    Hong Luo, Seok Su Sohn et al. Nature Communications
  42. Engineering atomic-level complexity in high-entropy and complex concentrated alloys (2019)
    Hyun Seok Oh, Sang Jun Kim et al. Nature Communications
  43. Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation (2020)
    Zhangwei Wang, Wenjun Lu et al. Science Advances
  44. A mechanically strong and ductile soft magnet with extremely low coercivity (2022)
    Liuliu Han, Fernando Maccari et al. Nature
  45. Hydrogen trapping and embrittlement in high-strength Al alloys (2022)
    Huan Zhao, Poulami Chakraborty et al. Nature
  46. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy (2020)
    Zhongji Sun, Xipeng Tan et al. Acta Materialia
  47. The Materials Science behind Sustainable Metals and Alloys (2023)
    Dierk Raabe Chemical Reviews
  48. Ductile 2-GPa steels with hierarchical substructure (2023)
    Yunjie Li, Guo Yuan et al. Science
  49. Reactive wear protection through strong and deformable oxide nanocomposite surfaces (2021)
    Chang Liu, Zhiming Li et al. Nature Communications
  50. Materials for extreme environments (2022)
    Suhas Eswarappa Prameela, Tresa M. Pollock et al. Nature Reviews Materials
  51. Chemo-mechanical failure mechanisms of the silicon anode in solid-state batteries (2024)
    Hanyu Huo, Ming Jiang et al. Nature Materials
  52. Shearing brittle intermetallics enhances cryogenic strength and ductility of steels (2024)
    Miao Song, Ning Yao et al. Science
  53. Green steel from red mud through climate-neutral hydrogen plasma reduction (2024)
    Matic Jovičević‐Klug, Isnaldi Rodrigues de Souza Filho et al. Nature
  54. Multifunctional high-entropy materials (2024)
    Liuliu Han, Shuya Zhu et al. Nature Reviews Materials

Immediate Impact

1 by Nobel laureates 64 from Science/Nature 304 standout
Sub-graph 1 of 13

Citing Papers

Large recoverable elastic energy in chiral metamaterials via twist buckling
2025 StandoutNature
10,000-h-stable intermittent alkaline seawater electrolysis
2025 StandoutNature
2 intermediate papers

Works of Dierk Raabe being referenced

Atomic-scale insights into surface species of electrocatalysts in three dimensions
2018
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
and 3 more

Author Peers

Author Last Decade Papers Cites
Dierk Raabe 70798 46533 9815 23462 1.2k 90.5k
Robert O. Ritchie 38282 22779 13257 14124 736 71.5k
Yuntian Zhu 36758 35985 4052 9346 567 49.2k
Peter K. Liaw 51172 16007 3308 29266 1.1k 56.3k
Р. З. Валиев 42049 46793 3438 10258 852 53.6k
Jian Lü 25337 19345 5313 6982 972 39.9k
K. Lu 33238 32899 2505 5852 398 44.1k
Terence G. Langdon 58578 56937 2249 17860 1.2k 69.5k
Michael F. Ashby 35895 23888 6762 4198 223 57.8k
A.G. Evans 33632 23473 8688 9924 592 64.3k
John W. Hutchinson 26917 23500 7388 6046 335 57.1k

All Works

Loading papers...

Rankless by CCL
2026