Citation Impact
Citing Papers
Challenges and Opportunities in Design for Additive Manufacturing
2014
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
2019
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
An effective rule for translating optimal selective laser melting processing parameters from one material to another
2020
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
2017
3D printing of high-strength aluminium alloys
2017 StandoutNature
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
2015
Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process
2018
Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4V
2017
Fortune favors the prepared: How SMEs approach business model innovations in Industry 4.0
2018 Standout
Digital twin-driven product design framework
2018 Standout
Layer-wise spatial modeling of porosity in additive manufacturing
2018
Smart manufacturing: Characteristics, technologies and enabling factors
2017 Standout
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
Metal Additive Manufacturing: A Review of Mechanical Properties
2016
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
2014
Deep learning for smart manufacturing: Methods and applications
2018 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping
2015
Digital twin modeling
2022 Standout
Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
2015
Adhesion effects on spreading of metal powders in selective laser melting
2019
A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions
2018 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
2016
Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory
2014
Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy
2019
Building digital twins of 3D printing machines
2016
Past, present and future of Industry 4.0 - a systematic literature review and research agenda proposal
2017 Standout
Digital Twin in Industry: State-of-the-Art
2019 Standout
Machine Learning and Deep Learning in smart manufacturing: The Smart Grid paradigm
2021 Standout
Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review
2019
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Additive manufacturing of steels: a review of achievements and challenges
2020
Digital Twin as a Service (DTaaS) in Industry 4.0: An Architecture Reference Model
2020
High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition
2020
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
2020 Standout
Digital Twin: Enabling Technologies, Challenges and Open Research
2020 Standout
When titans meet – Can industry 4.0 revolutionise the environmentally-sustainable manufacturing wave? The role of critical success factors
2018 Standout
Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
2014
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
2020
Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing
2018
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Monitoring and Adaptive Control of Laser Processes
2014
Steels in additive manufacturing: A review of their microstructure and properties
2019
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
2015
Smart manufacturing
2017 Standout
A Review of Sustainable Machining Engineering: Optimization Process Through Triple Bottom Line
2016
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS
2014
Model-Based Feature Information Network (MFIN): A Digital Twin Framework to Integrate Location-Specific Material Behavior Within Component Design, Manufacturing, and Performance Analysis
2020
Digital Twins: A Survey on Enabling Technologies, Challenges, Trends and Future Prospects
2022 Standout
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
2018
On the Fatigue Performance of Additively Manufactured Ti-6Al-4V to Enable Rapid Qualification for Aerospace Applications
2016
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Microstructure-controllable Laser Additive Manufacturing Process for Metal Products
2014
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
2017
Mechanistic models for additive manufacturing of metallic components
2020
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing
2015
Smart manufacturing: Past research, present findings, and future directions
2016
Additive manufacturing of metals
2016 Standout
Works of Deepankar Pal being referenced
A review of defect modeling in laser material processing
2017
A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting
2012
Influences of Energy Density on Porosity and Microstructure of Selective Laser Melted 17- 4PH Stainless Steel
2013
Melt Pool Characterization for Selective Laser Melting of Ti-6Al-4V Pre-alloyed Powder
2014
Effect of Scan Pattern on the Microstructural Evolution of Inconel 625 during Selective Laser Melting
2014
A New Finite Element Solver using Numerical Eigen Modes for Fast Simulation of Additive Manufacturing Processes
2013
An Integrated Approach to Additive Manufacturing Simulations Using Physics Based, Coupled Multiscale Process Modeling
2014
Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting
2017
Methods for Enhancing the Speed of Numerical Calculations for the Prediction of the Mechanical Behavior of Parts Made Using Additive Manufacturing
2013
A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development
2015
High Frequency Ultrasonic Non Destructive Evaluation of Additively Manufactured Components
2013
Simulating Melt Pool Shape and Lack of Fusion Porosity for Selective Laser Melting of Cobalt Chromium Components
2016
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
2014
An Integrated Approach to Cyber-Enabled Additive Manufacturing using Physics based, Coupled Multi-scale Process Modeling
2012
Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting
2014