Standout Papers
Citation Impact
Citing Papers
Room-Temperature Sputtered SnO2 as Robust Electron Transport Layer for Air-Stable and Efficient Perovskite Solar Cells on Rigid and Flexible Substrates
2019
Flow-enhanced solution printing of all-polymer solar cells
2015
Achieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy
2016
Nanotechnology for environmentally sustainable electromobility
2016 StandoutNobel
Controlled growth of perovskite layers with volatile alkylammonium chlorides
2023 StandoutNature
Efficient perovskite solar cells via improved carrier management
2021 StandoutNatureNobel
Organic solar cells based on non-fullerene acceptors
2018 Standout
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
2021 StandoutNature
Transparent Electrodes Printed with Nanocrystal Inks for Flexible Smart Devices
2015
Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells
2016
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
2019 StandoutNature
How machine learning can help select capping layers to suppress perovskite degradation
2020 StandoutNobel
Pursuing prosthetic electronic skin
2016 Standout
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
2014 Standout
A H2-evolving photocathode based on direct sensitization of MoS3 with an organic photovoltaic cell
2013
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology
2022 Standout
Ternary blend polymer solar cells with two non-fullerene acceptors as acceptor alloy
2017
A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating
2012
Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems
2015
Recent research progress of polymer donor/polymer acceptor blend solar cells
2016
Facile Method for Fabricating Flexible Substrates with Embedded, Printed Silver Lines
2013
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
Toward organic electronics with properties inspired by biological tissue
2015
Structural Origins for Tunable Open‐Circuit Voltage in Ternary‐Blend Organic Solar Cells
2015
Slot die coated planar perovskite solar cells via blowing and heating assisted one step deposition
2018
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
2017 Standout
25th Anniversary Article: Isoindigo‐Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors
2014
Versatile ternary organic solar cells: a critical review
2015
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Scalable slot-die coating of high performance perovskite solar cells
2018
Side‐Chain Engineering for Enhancing the Properties of Small Molecule Solar Cells: A Trade‐off Beyond Efficiency
2016
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
2019 Standout
Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%
2015
Mechanically Sintered Gallium–Indium Nanoparticles
2015
Stability of organic solar cells: challenges and strategies
2016
All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum
2012
Influence of Surface Energy on Organic Alloy Formation in Ternary Blend Solar Cells Based on Two Donor Polymers
2016
Cost‐Performance Analysis of Perovskite Solar Modules
2016
Organic photovoltaic cell with 17% efficiency and superior processability
2019
Efficient and Stable Perovskite Solar Cell with High Open-Circuit Voltage by Dimensional Interface Modification
2019
Manufacturing cost and market potential analysis of demonstrated roll-to-roll perovskite photovoltaic cell processes
2017
Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint
2017
Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells
2016
Expanded Theory of H- and J-Molecular Aggregates: The Effects of Vibronic Coupling and Intermolecular Charge Transfer
2018 Standout
Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials
2013
Comparative life cycle assessment of laminated and vacuum vapor-deposited thin film solid-state batteries
2014
Up-scalable sheet-to-sheet production of high efficiency perovskite module and solar cells on 6-in. substrate using slot die coating
2017
Slot‐Die Coating of a High Performance Copolymer in a Readily Scalable Roll Process for Polymer Solar Cells
2013
Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor
2015
Shallow and Deep Trap State Passivation for Low-Temperature Processed Perovskite Solar Cells
2020
Terthiophene-Based D–A Polymer with an Asymmetric Arrangement of Alkyl Chains That Enables Efficient Polymer Solar Cells
2015
Achieving a high fill factor for organic solar cells
2016
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Importance of the Donor:Fullerene Intermolecular Arrangement for High-Efficiency Organic Photovoltaics
2014
Evaluation of Electron Donor Materials for Solution‐Processed Organic Solar Cells via a Novel Figure of Merit
2017
High performance all-small-molecule solar cells: engineering the nanomorphology via processing additives
2016
Toward a Low‐Cost Artificial Leaf: Driving Carbon‐Based and Bifunctional Catalyst Electrodes with Solution‐Processed Perovskite Photovoltaics
2016
Light-induced generation of free radicals by fullerene derivatives: an important degradation pathway in organic photovoltaics?
2017
Non-fullerene acceptors for organic photovoltaics: an emerging horizon
2014
Hydrogel bioelectronics
2018 Standout
Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%
2014
Controlled crystallization of CH3NH3PbI3 films for perovskite solar cells by various PbI2(X) complexes
2016
Perowskit‐Solarzellen: atomare Ebene, Schichtqualität und Leistungsfähigkeit der Zellen
2017
Synthesis cost dictates the commercial viability of lead sulfide and perovskite quantum dot photovoltaics
2018 StandoutNobel
Low-Bandgap Small Molecules as Non-Fullerene Electron Acceptors Composed of Benzothiadiazole and Diketopyrrolopyrrole for All Organic Solar Cells
2015
Stretchable and Soft Electronics using Liquid Metals
2017 Standout
Spray coated high-conductivity PEDOT:PSS transparent electrodes for stretchable and mechanically-robust organic solar cells
2013
A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells
2019
25th Anniversary Article: Carbon Nanotube‐ and Graphene‐Based Transparent Conductive Films for Optoelectronic Devices
2014
Counter electrodes in dye-sensitized solar cells
2017
Interfaces in Perovskite Solar Cells
2017
Electron‐Beam‐Evaporated Nickel Oxide Hole Transport Layers for Perovskite‐Based Photovoltaics
2019
Imperfections and their passivation in halide perovskite solar cells
2019 Standout
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
2015
Organic Optoelectronic Materials: Mechanisms and Applications
2016
Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%
2013
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
2016 Standout
Roll-to-roll printing of flexible thin-film organic thermoelectric devices
2016
Integrated hybrid life cycle assessment and supply chain environmental profile evaluations of lead-based (lead zirconate titanate) versus lead-free (potassium sodium niobate) piezoelectric ceramics
2016
Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells
2021
Oligothiophene-bridged perylene diimide dimers for fullerene-free polymer solar cells: effect of bridge length
2015
A Solution‐Processable Electron Acceptor Based on Dibenzosilole and Diketopyrrolopyrrole for Organic Solar Cells
2013
Microstructural and Electronic Origins of Open‐Circuit Voltage Tuning in Organic Solar Cells Based on Ternary Blends
2015
Inkjet-Printed Triple Cation Perovskite Solar Cells
2018
Roll‐to‐Roll fabrication of large area functional organic materials
2012
Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates
2011
Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes
2015
Extremely lightweight and ultra-flexible infrared light-converting quantum dot solar cells with high power-per-weight output using a solution-processed bending durable silver nanowire-based electrode
2017
Plasticization of PEDOT:PSS by Common Additives for Mechanically Robust Organic Solar Cells and Wearable Sensors
2014
Slot-Die Coated Perovskite Films Using Mixed Lead Precursors for Highly Reproducible and Large-Area Solar Cells
2018
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Flexible electronics under strain: a review of mechanical characterization and durability enhancement strategies
2015
Promises and challenges of perovskite solar cells
2017 StandoutScience
Optimized “Alloy‐Parallel” Morphology of Ternary Organic Solar Cells
2016
Air Processed Inkjet Infiltrated Carbon Based Printed Perovskite Solar Cells with High Stability and Reproducibility
2016
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics
2015
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
2017
Solvent Annealing of Perovskite‐Induced Crystal Growth for Photovoltaic‐Device Efficiency Enhancement
2014 Standout
The influence of spacer units on molecular properties and solar cell performance of non-fullerene acceptors
2015
Research opportunities to advance solar energy utilization
2016 StandoutScience
Loss Mechanisms in Thick‐Film Low‐Bandgap Polymer Solar Cells
2013
The future of organic photovoltaics
2014
It is all in the Pattern—High‐Efficiency Power Extraction from Polymer Solar Cells through High‐Voltage Serial Connection
2013
Transparente Elektroden aus Nanokristalltinten für flexible Bauelemente
2015
A Twisted Dimeric Perylene Diimide Electron Acceptor for Efficient Organic Solar Cells
2014
Noble metal-free hydrogen evolution catalysts for water splitting
2015 Standout
Highly Conductive and Flexible Silver Nanowire-Based Microelectrodes on Biocompatible Hydrogel
2014
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
2013
Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency
2014
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
2013 Standout
Broad Family of Carbon Nanoallotropes: Classification, Chemistry, and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures
2015 Standout
Applications of 2D MXenes in energy conversion and storage systems
2018 Standout
Scalable fabrication of perovskite solar cells
2018
High-Efficiency Perovskite Solar Cells
2020 Standout
Performance of a Printed Photodetector on a Paper Substrate
2014
Hindered Formation of Photoinactive δ-FAPbI3 Phase and Hysteresis-Free Mixed-Cation Planar Heterojunction Perovskite Solar Cells with Enhanced Efficiency via Potassium Incorporation
2018
Spray‐Cast Multilayer Organometal Perovskite Solar Cells Fabricated in Air
2016
Achieving long-term stable perovskite solar cells via ion neutralization
2016
Comparison of additive amount used in spin-coated and roll-coated organic solar cells
2014
Molecularly Stretchable Electronics
2014
Versatile third components for efficient and stable organic solar cells
2015
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
2020 Standout
Influence of Donor Polymer on the Molecular Ordering of Small Molecular Acceptors in Nonfullerene Polymer Solar Cells
2017
Efficient fullerene-free organic solar cells based on fused-ring oligomer molecules
2015
Challenges for commercializing perovskite solar cells
2018 StandoutScience
Advanced Ellipsometric Characterization of Conjugated Polymer Films
2013
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
2015
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
2014
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
2017 Standout
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
2016
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
The structural evolution of an isoindigo-based non-fullerene acceptor for use in organic photovoltaics
2015
Homo‐Tandem Polymer Solar Cells with VOC >1.8 V for Efficient PV‐Driven Water Splitting
2016
Printing nanostructured carbon for energy storage and conversion applications
2015
A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques
2017
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
2015
Photonic flash-annealing of lead halide perovskite solar cells in 1 ms
2016
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
2015 Standout
Interface Design of Hybrid Electron Extraction Layer for Relieving Hysteresis and Retarding Charge Recombination in Perovskite Solar Cells
2018
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
2017 StandoutScience
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
2015 Standout
Fast Inline Roll‐to‐Roll Printing for Indium‐Tin‐Oxide‐Free Polymer Solar Cells Using Automatic Registration
2013
Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell
2017
Polymer/Small Molecule/Fullerene Based Ternary Solar Cells
2017
“All That Glisters Is Not Gold”: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells
2015
Thermally Activated Delayed Fluorescence Materials Towards the Breakthrough of Organoelectronics
2014 Standout
Freely available OPV—The fast way to progress
2013
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
2016 Standout
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
2017 StandoutScience
Opportunities to improve the net energy performance of photoelectrochemical water-splitting technology
2016
Control of Crystal Growth toward Scalable Fabrication of Perovskite Solar Cells
2018
Competition between deformability and charge transport in semiconducting polymers for flexible and stretchable electronics
2016
Toward practical solar hydrogen production – an artificial photosynthetic leaf-to-farm challenge
2019 Standout
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of Dechan Angmo being referenced
Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes
2012
Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells
2015
Inkjet Printing of Back Electrodes for Inverted Polymer Solar Cells
2013
Roll‐to‐Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration
2012
Over 2 Years of Outdoor Operational and Storage Stability of ITO‐Free, Fully Roll‐to‐Roll Fabricated Polymer Solar Cell Modules
2015
Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing
2011
Printing-friendly sequential deposition via intra-additive approach for roll-to-roll process of perovskite solar cells
2017
Roll-to-roll fabrication of polymer solar cells
2012 Standout
All solution processing of ITO-free organic solar cell modules directly on barrier foil
2012
Round‐Robin Studies as a Method for Testing and Validating High‐Efficiency ITO‐Free Polymer Solar Cells Based on Roll‐to‐Roll‐Coated Highly Conductive and Transparent Flexible Substrates
2012
Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules
2013
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
2017
Comparison of Fast Roll‐to‐R oll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells
2013
Roll‐to‐Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution‐Processed Tandem Polymer Solar Cells
2015
Flexible ITO‐free polymer solar cells
2012
Self‐Assembled 2D Perovskite Layers for Efficient Printable Solar Cells
2018
Low‐cost upscaling compatibility of five different ITO‐free architectures for polymer solar cells
2013
Comparative Indoor and Outdoor Degradation of Organic Photovoltaic Cells via Inter-laboratory Collaboration
2015
ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules
2011
Solar cells with one-day energy payback for the factories of the future
2011
Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes
2015
OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools
2013
Outdoor Operational Stability of Indium‐Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark
2014
High‐Volume Processed, ITO‐Free Superstrates and Substrates for Roll‐to‐Roll Development of Organic Electronics
2014
Ellipsometry as a Nondestructive Depth Profiling Tool for Roll-to-Roll Manufactured Flexible Solar Cells
2011
One-step roll-to-roll air processed high efficiency perovskite solar cells
2018
Fullerene alloy formation and the benefits for efficient printing of ternary blend organic solar cells
2015