Citation Impact
Citing Papers
Mechanical Performance and Transparency of Nanocellulose Reinforced Polymer Nanocomposites
2013
Adjustable wettability of methyl methacrylate modified ramie fiber
2008
The wood from the trees: The use of timber in construction
2016 Standout
The technological and economic prospects for CO2 utilization and removal
2019 StandoutNature
Nanotechnology for environmentally sustainable electromobility
2016 StandoutNobel
Cellulose nanomaterials review: structure, properties and nanocomposites
2011 Standout
Green Chemistry: Principles and Practice
2009 Standout
Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures
2011 Standout
Sustainable polymers from renewable resources
2016 StandoutNature
Conversion of biomass to selected chemical products
2011 Standout
Microfibrillated cellulose – Its barrier properties and applications in cellulosic materials: A review
2012
Biomedical applications of biodegradable polymers
2011 Standout
Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications
2019
Chitosan-coated electrospun PLA fibers for rapid mineralization of calcium phosphate
2014
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
2019 StandoutNature
Nanocelluloses: A New Family of Nature‐Based Materials
2011 Standout
Nanosized sustained-release drug depots fabricated using modified tri-axial electrospinning
2017
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
2014 StandoutNature
Polymer biodegradation: Mechanisms and estimation techniques – A review
2008 Standout
Cellulose modification by polymer grafting: a review
2009
Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells
2011 Standout
Xylan polysaccharides fabricated into nanofibrous substrate for myocardial infarction
2012
Fusidic acid and rifampicin co-loaded PLGA nanofibers for the prevention of orthopedic implant associated infections
2013
Nacre-mimetics with synthetic nanoclays up to ultrahigh aspect ratios
2015
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
2010
Engineered Nanoparticles for Drug Delivery in Cancer Therapy
2014 Standout
High Performance Cellulose Nanocomposites: Comparing the Reinforcing Ability of Bacterial Cellulose and Nanofibrillated Cellulose
2012
Emerging Engineered Wood for Building Applications
2022 Standout
Strategies to modify physicochemical properties of hemicelluloses from biorefinery and paper industry for packaging material
2018
Jute fibre/polypropylene composites II. Thermal, hydrothermal and dynamic mechanical behaviour
2007
Chiral-nematic self-ordering of rodlike cellulose nanocrystals grafted with poly(styrene) in both thermotropic and lyotropic states
2008
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Noncovalent Functionalization of Graphene and Graphene Oxide for Energy Materials, Biosensing, Catalytic, and Biomedical Applications
2016 Standout
Carbohydrate derived copoly(lactide) as the compatibilizer for bacterial cellulose reinforced polylactide nanocomposites
2012
Jute/polypropylene composites I. Effect of matrix modification
2005
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
2009
Effective Young’s Modulus of Bacterial and Microfibrillated Cellulose Fibrils in Fibrous Networks
2012
Recent advances in polybenzimidazole/phosphoric acid membranes for high‐temperature fuel cells
2014
Flexible and conductive MXene films and nanocomposites with high capacitance
2014 Standout
Valorization of Biomass: Deriving More Value from Waste
2012 StandoutScience
Transparent, Flexible Films Based on Layered Double Hydroxide/Cellulose Acetate with Excellent Oxygen Barrier Property
2013
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
2015
More Than Meets the Eye in Bacterial Cellulose: Biosynthesis, Bioprocessing, and Applications in Advanced Fiber Composites
2013
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
2018 Standout
Graphene photonics and optoelectronics
2010 Standout
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Conversion of Biomass into Chemicals over Metal Catalysts
2013 Standout
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
2009
Arabinoxylan/nanofibrillated cellulose composite films
2012
Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling
2005
Functionalising wood by nanosol application
2008
Interfacial evaluation of modified Jute and Hemp fibers/polypropylene (PP)-maleic anhydride polypropylene copolymers (PP-MAPP) composites using micromechanical technique and nondestructive acoustic emission
2006
Enhancement of the Nanofibrillation of Wood Cellulose through Sequential Periodate–Chlorite Oxidation
2012
Degradable Controlled-Release Polymers and Polymeric Nanoparticles: Mechanisms of Controlling Drug Release
2016 Standout
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
2018 Standout
Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization
2005
Interactions of structurally different hemicelluloses with nanofibrillar cellulose
2011
The effect of acetylation on interfacial shear strength between plant fibres and various matrices
2001
Liquid Exfoliation of Layered Materials
2013 StandoutScience
Biopolymer-based microgels/nanogels for drug delivery applications
2009
Review: A History of Cyclodextrins
2014 Standout
Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications
2009 Standout
Emerging Two-Dimensional Nanomaterials for Electrocatalysis
2018 Standout
Silylation of cellulose nanocrystals and their reinforcement of commercial silicone rubber
2015
Cellulose-Based Bio- and Nanocomposites: A Review
2011
Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers
2015 Standout
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
2015 Standout
Cotton Fibers Encapsulated with Homo- and Block Copolymers: Synthesis by the Atom Transfer Radical Polymerization Grafting-From Technique and Solid-State NMR Dynamic Investigations
2006
Turning polysaccharides into hydrophobic materials: a critical review. Part 2. Hemicelluloses, chitin/chitosan, starch, pectin and alginates
2010
Intelligent Dual-Responsive Cellulose Surfaces via Surface-Initiated ATRP
2008
Alternative Value Chains for Biomass Conversion to Chemicals
2010
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
A review on cyclodextrin encapsulation of essential oils and volatiles
2010
Thermal degradation and biodegradability of poly (lactic acid)/corn starch biocomposites
2006
On the use of nanocellulose as reinforcement in polymer matrix composites
2014 Standout
Synthesis of Polycaprolactone-Grafted Microfibrillated Cellulose for Use in Novel Bionanocomposites–Influence of the Graft Length on the Mechanical Properties
2011
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
2009
Biofibres and biocomposites
2007 Standout
Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rise Husk Composites: The Influence of the Natural Fibers on the Mechanical, Thermal and Biodegradability Properties
2010
The effect of relative humidity on the gas permeability and swelling in PFSI membranes
2011
A review on oil palm empty fruit bunch fiber‐reinforced polymer composite materials
2010
Gas permeation in perflurosulfonated membranes: Influence of temperature and relative humidity
2013
An Ultrastrong Nanofibrillar Biomaterial: The Strength of Single Cellulose Nanofibrils Revealed via Sonication-Induced Fragmentation
2012
From monomers to polymers from renewable resources: Recent advances
2015
Bacterial Cellulose Nanopaper as Reinforcement for Polylactide Composites: Renewable Thermoplastic NanoPaPreg
2014
Green and Sustainable Solvents in Chemical Processes
2018 Standout
Structure–property–function relationships of natural and engineered wood
2020 Standout
Susceptibility of never-dried and freeze-dried bacterial cellulose towards esterification with organic acid
2012
Development of continuous process enabling nanofibrillation of pulp and melt compounding
2012
Nanocellulose: a new ageless bionanomaterial
2013
Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate
2009
Temperature-induced chiral nematic phase changes of suspensions of poly(N,N-dimethylaminoethyl methacrylate)-grafted cellulose nanocrystals
2009
Preparation and Characterization of Bacterial Cellulose/Polylactide Nanocomposites
2010
Mechanical properties of kenaf fibers and kenaf/PLA composites
2007
Cellulose Nanocrystals Grafted with Polystyrene Chains through Surface-Initiated Atom Transfer Radical Polymerization (SI-ATRP)
2009
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
2008
All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
2009
Green Solvents in Carbohydrate Chemistry: From Raw Materials to Fine Chemicals
2015
Biocomposites based on plasticized starch: thermal and mechanical behaviours
2004
The irruption of polymers from renewable resources on the scene of macromolecular science and technology
2011
Stiff as a Board: Perspectives on the Crystalline Modulus of Cellulose
2012
Biodegradable composites based on lignocellulosic fibers—An overview
2009
Applications of 2D MXenes in energy conversion and storage systems
2018 Standout
Reinforcing efficiency of nanocellulose in polymers
2014
Effect of Cellulose Microfiber Silylation Procedures on the Properties and Antibacterial Activity of Polydimethylsiloxane
2020
Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose
2010
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Sisal chemically modified with lignins: Correlation between fibers and phenolic composites properties
2008
Bionanocomposites of thermoplastic starch and cellulose nanofibers manufactured using twin-screw extrusion
2012
Recent Progress in Cobalt‐Based Heterogeneous Catalysts for Electrochemical Water Splitting
2015 Standout
Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues
2008
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Improvement of physico-mechanical properties of jute fiber reinforced polypropylene composites by post-treatment
2008
Bio-composite of bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) reinforced with vegetable fibers
2007
Mechanical properties of short flax fibre bundle/poly(ε-caprolactone) composites: Influence of matrix modification and fibre content
2006
Direct routes from biomass to end-products
2010
Fabrication of Superhydrophobic Cellulose-Based Materials through a Solution-Immersion Process
2008
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
Development of high strength biodegradable composites using Manila hemp fiber and starch-based biodegradable resin
2006
Surface functionalisation of bacterial cellulose as the route to produce green polylactide nanocomposites with improved properties
2009
Cellulose Nanocrystals: Chemistry, Self-Assembly, and Applications
2010 Standout
Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups
2010
Polymers from Renewable Resources: A Challenge for the Future of Macromolecular Materials
2008 Standout
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
2013 Standout
Works of David Plackett being referenced
Biopolymers : new materials for sustainable films and coatings
2011
Acetyl Distribution in Acetylated Whole Wood and Reactivity of Isolated Wood Cell-Wall Components to Acetic Anhydride
1994
PLGA and PHBV Microsphere Formulations and Solid-State Characterization: Possible Implications for Local Delivery of Fusidic Acid for the Treatment and Prevention of Orthopaedic Infections
2009
Drug intercalation in layered double hydroxide clay: Application in the development of a nanocomposite film for guided tissue regeneration
2011
Transparent Films Based on PLA and Montmorillonite with Tunable Oxygen Barrier Properties
2012
Kinetics and mechanism of the monomeric products from abiotic hydrolysis of poly[(R)-3-hydroxybutyrate] under acidic and alkaline conditions
2005
Biodegradable composites based on l-polylactide and jute fibres
2003
Sustainable Films and Coatings from Hemicelluloses: A Review
2008
Maleated Polylactide as an Interfacial Compatibilizer in Biocomposites
2004
Microfibrillated cellulose and new nanocomposite materials: a review
2010 Standout
Biodegradable polymer solar cells
2008
Highly transparent films from carboxymethylated microfibrillated cellulose: The effect of multiple homogenization steps on key properties
2010
Surface chemistry and moisture sorption properties of wood coated with multifunctional alkoxysilanes by sol‐gel process
2003
Novel Foams Based on Freeze‐Dried Renewable Vital Wheat Gluten
2010
Investigation of mass transport properties of microfibrillated cellulose (MFC) films
2010
Conifer fibers as reinforcing materials for polypropylene‐based composites
2001
Properties of plasticized composite films prepared from nanofibrillated cellulose and birch wood xylan
2012
Physical properties and morphology of films prepared from microfibrillated cellulose and microfibrillated cellulose in combination with amylopectin
2010
High-temperature proton exchange membranes based on polybenzimidazole and clay composites for fuel cells
2011
Characterization ofl-polylactide andl-polylactide–polycaprolactone co-polymer films for use in cheese-packaging applications
2005
Synthesis and characterization of birch wood xylan succinoylated in 1-n-butyl-3-methylimidazolium chloride
2011
Weathering of chemically modified wood
1992
Modification of Jute Fibers with Polystyrene via Atom Transfer Radical Polymerization
2005
Behavior of α‐ and β‐cyclodextrin‐encapsulated allyl isothiocyanate as slow‐release additives in polylactide‐co‐polycaprolactone films
2007
A review of nanocellulose as a novel vehicle for drug delivery
2014