Standout Papers
Citation Impact
Citing Papers
Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology
2014
Intraoral scanners in dentistry: a review of the current literature
2017 Standout
Bone regeneration: current concepts and future directions
2011 Standout
Platelet-rich fibrin (PRF): A second-generation platelet concentrate. Part I: Technological concepts and evolution
2006 Standout
Mechanical properties of resin-ceramic CAD/CAM restorative materials
2015 Standout
Mechanical properties of composite resin blocks for CAD/CAM
2014 Standout
Implant biomaterials: A comprehensive review
2015 Standout
Maxillary Sinus Floor Augmentation Using Bovine Bone Grafts With Simultaneous Implant Placement: A 5-Year Prospective Follow-Up Study
2011
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience
2009 Standout
Accuracy of full-arch scans using intraoral scanners
2013
An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system
2013
Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis
2016
Effects of two grading techniques of zirconia material on the fatigue limit of full-contour 3-unit fixed dental prostheses
2017
Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: A systematic review
2014
Application of Platelet-Rich Plasma for Enhanced Bone Regeneration in Grafted Sinus
2011
Bone Graft Materials
2007
Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years
2004
Sinus floor augmentation with simultaneous placement of dental implants in the presence of platelet‐rich plasma or recombinant human bone morphogenetic protein‐7
2004
Using digitally coded healing abutments and an intraoral scanner to fabricate implant-supported, cement-retained restorations
2013
Tissue-engineered bone for maxillary sinus augmentation
2004
Fracture Resistance of Yttria‐Stabilized Zirconia Dental Implant Abutments
2008
Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes
2014 Standout
Bovine bone matrix/poly( l -lactic- co -ε-caprolactone)/gelatin hybrid scaffold (SmartBone ® ) for maxillary sinus augmentation: A histologic study on bone regeneration
2016
Advancements in CAD/CAM technology: Options for practical implementation
2016 Standout
Bone Tissue Engineering: State of the Art and Future Trends
2004 Standout
Survival rate, fracture strength and failure mode of ceramic implant abutments after chewing simulation
2005
Current ceramic materials and systems with clinical recommendations: A systematic review
2007 Standout
Lateral alveolar ridge augmentation using a synthetic nano‐crystalline hydroxyapatite bone substitution material (Ostim®). Preliminary clinical and histological results
2007
Accelerated techniques for a post and core and a crown restoration with intraoral digital scanners and CAD/CAM and rapid prototyping
2014
In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions
2015
Platelet-rich plasma: evidence to support its use
2004 Standout
Validity of Intraoral Scans Compared with Plaster Models: An In-Vivo Comparison of Dental Measurements and 3D Surface Analysis
2016
Effects of offset values for artificial teeth positions in CAD/CAM complete denture
2014
The Effect of Bovine Bone Graft With or Without Platelet-Rich Plasma on Maxillary Sinus Floor Augmentation
2011
Veneered anatomically designed zirconia FDPs resulting from digital intraoral scans: Preliminary results of a prospective clinical study.
2015
Nonradiological Method for 3-Dimensional Implant Position Assessment Using an Intraoral Scan
2014
Using zirconia-based prosthesis in a complete-mouth reconstruction treatment for worn dentition with the altered vertical dimension of occlusion
2014
Resin-ceramic bonding: A review of the literature
2003 Standout
Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner
2013
Zirconia‐implant‐supported all‐ceramic crowns withstand long‐term load: a pilot investigation
2006
Speed sintering translucent zirconia for chairside one-visit dental restorations: Optical, mechanical, and wear characteristics
2017
Tooth preparation for full-coverage restorations—a literature review
2015
Making yttria-stabilized tetragonal zirconia translucent
2014
Accuracy of a Digital Impression System Based on Active Triangulation Technology With Blue Light for Implants
2015
Sinus Graft With Safescraper: 5-Year Results
2011
Platelet Quantification and Growth Factor Analysis from Platelet-Rich Plasma: Implications for Wound Healing
2004 Standout
The efficacy of posterior three-unit zirconium-oxide–based ceramic fixed partial dental prostheses: A prospective clinical pilot study
2006 Standout
Comparison of repeatability between intraoral digital scanner and extraoral digital scanner: An in-vitro study
2015
Influence of conventional and digital intraoral impressions on the fit of CAD/CAM-fabricated all-ceramic crowns
2016
Influence of scanner, powder application, and adjustments on CAD-CAM crown misfit
2017
Accuracy of complete-arch dental impressions: A new method of measuring trueness and precision
2013 Standout
3D printed versus conventionally cured provisional crown and bridge dental materials
2017 Standout
Porcine Bone Used in Sinus Augmentation Procedures: A 5-Year Retrospective Clinical Evaluation
2010
All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs)
2015 Standout
Clinical relevance of tests on bond strength, microleakage and marginal adaptation
2012
Accuracy of single-tooth restorations based on intraoral digital and conventional impressions in patients
2015
Impressions Are Changing
2009
Making bone: implant insertion into tissue-engineered bone for maxillary sinus floor augmentation—a preliminary report
2003
Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique
2014
Minimally invasive lithium disilicate ceramic veneers fabricated using chairside CAD/CAM: A clinical report
2012
In vivo precision of conventional and digital methods for obtaining quadrant dental impressions
2015
Fatigue of dental ceramics
2013
Fitting accuracy of zirconia single crowns produced via digital and conventional impressions—a clinical comparative study
2016
Autologous platelets as a source of proteins for healing and tissue regeneration
2003 Standout
Comparison of the accuracy of a 3-dimensional virtual method and the conventional method for transferring the maxillary cast to a virtual articulator
2015
Trueness and Precision of Four Intraoral Scanners in Oral Implantology: A Comparative in Vitro Study
2016
An overview of zirconia ceramics: Basic properties and clinical applications
2007 Standout
Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression
2016
Scanning accuracy and precision in 4 intraoral scanners: An in vitro comparison based on 3-dimensional analysis
2014
Fabricating complete dentures with CAD/CAM technology
2014
A 3 years retrospective study of survival for zirconia-based single crowns fabricated from intraoral digital impressions
2014
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Clinical use of a direct chairside oral scanner: An assessment of accuracy, time, and patient acceptance
2014
Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations
2016
Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature
2004
Accuracy of four intraoral scanners in oral implantology: a comparative in vitro study
2017
Maxillary sinus augmentation with deproteinated bovine bone and platelet rich plasma with simultaneous insertion of endosseous implants
2003
Examination of the Position Accuracy of Implant Abutments Reproduced by Intra-Oral Optical Impression
2016
Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial
2015
Fit of 4-unit FDPs from CoCr and zirconia after conventional and digital impressions
2015
A systematic review of the survival and complication rates of all‐ceramic and metal–ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses.
2007 Standout
Extraction and application of keratin from natural resources: a review
2021 Standout
A comparison of the marginal fit of crowns fabricated with digital and conventional methods
2014
A clinical comparison of nano-crystalline hydroxyapatite (Ostim) and autogenous bone graft in the treatment of periodontal intrabony defects
2011
Digital Imaging and Fabrication
2013
Investigation of accuracy and reproducibility of abutment position by intraoral scanners
2017
3D printing in dentistry
2015 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics
2015
Maxilla Sinus Grafting With Marine Algae Derived Bone Forming Material: A Clinical Report of Long-Term Results
2005
Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations
2016
Contemporary all-ceramic fixed partial dentures: a review
2004
Evaluation of the marginal fit of single-unit, complete-coverage ceramic restorations fabricated after digital and conventional impressions: A systematic review and meta-analysis
2016
In vitro study of adherent mandibular osteoblast-like cells on carrier materials
2005
Digital process for an implant-supported fixed dental prosthesis: A clinical report
2015
Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions
2015
Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing
2014
Implant-supported full-arch zirconia-based mandibular fixed dental prostheses. Eight-year results from a clinical pilot study
2012
An in vitro evaluation of ZiReal abutments with hexagonal connection: in original state and following abutment preparation.
2005
Performance of Dental Ceramics: Challenges for Improvements
2011
The Digital One‐Abutment/One‐Time Concept. A Clinical Report
2015
Metal elements in tissue with dental peri‐implantitis: a pilot study
2015
Adhesion to Y-TZP ceramic: Study of silica nanofilm coating on the surface of Y-TZP
2014
An in vitro evaluation of titanium, zirconia, and alumina procera abutments with hexagonal connection.
2006
On the mechanical properties of monolithic and laminated nano-ceramic resin structures obtained by laser printing
2017
Clinical and laboratory considerations for the use of CAD/CAM Y-TZP-based restorations.
2003
A systematic review of the survival and complication rates of implant‐supported fixed dental prostheses (FDP s) after a mean observation period of at least 5 years
2012 Standout
Intraoral Digital Impression Technique Compared to Conventional Impression Technique. A Randomized Clinical Trial
2015
Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review
2016
Digital vs. conventional full‐arch implant impressions: a comparative study
2016
Fracture load of CAD/CAM-generated slot-inlay FPDs.
2004
Accuracy of digital versus conventional implant impressions
2014
3D and 2D Marginal Fit of Pressed and CAD/CAM Lithium Disilicate Crowns Made from Digital and Conventional Impressions
2014
Review of selective laser melting: Materials and applications
2015 Standout
Managing Carious Lesions
2016 Standout
Comparative analysis on reproducibility among 5 intraoral scanners: sectional analysis according to restoration type and preparation outline form
2016
Use of particulate dentin-plaster of Paris combination with/without platelet-rich plasma in the treatment of bone defects around implants.
2002
Photopolymerization in 3D Printing
2019 Standout
The fluorohydroxyapatite (FHA) FRIOS® Algipore® is a suitable biomaterial for the reconstruction of severely atrophic human maxillae
2003
Comparison of digital scanning and polyvinyl siloxane impression techniques by dental students: instructional efficiency and attitudes towards technology
2016
Intraoral Digital Impression Technique: A Review
2014
Complete digital workflow for the production of implant‐supported single‐unit monolithic crowns
2013
A review of 4D printing
2017
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Sliding Contact Fatigue of Graded Zirconia with External Esthetic Glass
2011
Effect of imaging powder and CAD/CAM stone types on the marginal gap of zirconia crowns
2015
The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics
2017
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
A preliminary prospective evaluation of all-ceramic crown-retained and inlay-retained fixed partial dentures.
2006
Influence of platelet-rich plasma on osseous healing of dental implants: a histologic and histomorphometric study in minipigs.
2003
Platelet-Rich Plasma
2009 Standout
Novel Zirconia Materials in Dentistry
2017 Standout
Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments
2021 Standout
Biomaterials & scaffolds for tissue engineering
2011 Standout
In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions.
2015
Non‐radiological method for three‐dimensional implant position evaluation using an intraoral scan method
2013
Biomimetic Aspects of Restorative Dentistry Biomaterials
2020
Accuracy of a Digital Impression System Based on Active Wavefront Sampling Technology for Implants Considering Operator Experience, Implant Angulation, and Depth
2013
In Vitro Wear Behavior of Zirconia Opposing Enamel: A Systematic Review
2014
Digital versus conventional implant impressions for edentulous patients: accuracy outcomes
2015
Evaluation of platelet-rich plasma in combination with anorganic bovine bone in the rabbit cranium: a pilot study.
2004
Enamel wear caused by monolithic zirconia crowns after 6 months of clinical use
2014
A new method for fabricating zirconia copings using a Nd:YVO4 nanosecond laser
2014
An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla
2016
Accuracy of digital impressions of multiple dental implants: an in vitro study
2016
Accuracy of a Digital Impression System Based on Parallel Confocal Laser Technology for Implants with Consideration of Operator Experience and Implant Angulation and Depth
2014
Comparative histological results of different biomaterials used in sinus augmentation procedures: a human study at 6 months
2011
Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams
2014
Microtensile Bond Strength of Lithium Disilicate to Zirconia with the CAD‐on Technique
2015
CEREC CAD/CAM Chairside System.
2015
Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition
2015
Foreign Bodies Associated With Peri‐Implantitis Human Biopsies
2014
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Zirconia dental implants: where are we now, and where are we heading?
2016
Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture–Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle
2015
Precision of Dental Implant Digitization Using Intraoral Scanners
2016
Biomedical production of implants by additive electro-chemical and physical processes
2012
A comparison of the precision of three-dimensional images acquired by 2 digital intraoral scanners: effects of tooth irregularity and scanning direction
2016
Peri‐implantitis
2018 Standout
Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature.
2015
Works of Daniel Edelhoff being referenced
Retention of selected core materials to zirconia posts.
2002
Adhäsiv und konventionell befestigte Empress(r)1-Kronen - Klinische Befunde nach vierjähriger Liegedauer
2000
Tooth structure removal associated with various preparation designs for anterior teeth
2002 Standout
Effect of preparation angles on the precision of zirconia crown copings fabricated by CAD/CAM system
2008
Accuracy of digital models obtained by direct and indirect data capturing
2012
Accuracy of five intraoral scanners compared to indirect digitalization
2016
Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization – A laboratory study
2014
Maxillary sinus augmentation using xenogenic bone substitute material Bio‐Oss® in combination with venous blood
2000
A new method for the evaluation of the accuracy of full-arch digital impressions in vitro
2015
Digital dentistry: an overview of recent developments for CAD/CAM generated restorations
2008 Standout
In vivo fracture resistance of implant-supported all-ceramic restorations
2003
Wear at the titanium–titanium and the titanium–zirconia implant–abutment interface: A comparative in vitro study
2012
To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working Group 4 materials: cementation
2007
Histo-anatomic 3D printing of dental structures
2016
Computer-aided evaluation of preparations for CAD/CAM-fabricated all-ceramic crowns
2012
In vitro performance of full-contour zirconia single crowns
2011
All-ceramic restorations in different indications
2011
Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques
2013
Three-year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs)
2009
Influence of connector design and material composition and veneering on the stress distribution of all-ceramic fixed dental prostheses: A finite element study
2011
Clinical results of lithium-disilicate crowns after up to 9 years of service
2012
High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings — A new fabrication mode for all-ceramic restorations
2008
Metal-free inlay-retained fixed partial dentures.
2001
Ceramic abutments--a new era in achieving optimal esthetics in implant dentistry.
2000
Marginal and internal fits of fixed dental prostheses zirconia retainers
2008
Implant Impression Techniques for the Edentulous Jaw: A Summary of Three Studies
2015
Clinical prospective study of a modified technique to extend the keratinized gingiva around implants in combination with ridge augmentation: one-year results.
2012
Digital evaluation of the reproducibility of implant scanbody fit—an in vitro study
2011
Reconstruction of esthetics with a digital approach.
2011
Maxillary sinus augmentation with the xenograft Bio-Oss and autogenous intraoral bone for qualitative improvement of the implant site: a histologic and histomorphometric clinical study in humans.
2001
Prospective study of zirconia-based restorations: 3-year clinical results.
2010
Tooth structure removal associated with various preparation designs for posterior teeth.
2002
HIP zirconia fixed partial dentures--clinical results after 3 years of clinical service.
2008
Influence of preparation angle on marginal and internal fit of CAD/CAM-fabricated zirconia crown copings.
2009
A novel CAD/CAM base metal compared to conventional CoCrMo alloys: an in-vitro study of the long-term metal-ceramic bond strength.
2014