Citation Impact
Citing Papers
A review of hydrogen embrittlement of martensitic advanced high-strength steels
2016
Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes
2015
Effect of Strain Path in High-Pressure Torsion Process on Hardening in Commercial Purity Titanium
2007
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications
2013
TiO2 Nanotubes: Synthesis and Applications
2011 Standout
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
2017
Doped TiO2 and TiO2 Nanotubes: Synthesis and Applications
2010
Antimicrobial strategies centered around reactive oxygen species – bactericidal antibiotics, photodynamic therapy, and beyond
2013 Standout
Some aspects of high manganese twinning-induced plasticity (TWIP) steel, a review
2013
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
2010
A critical review of high entropy alloys and related concepts
2016 Standout
An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe–Mn–Si–Al twinning-induced plasticity steel
2015
Severe plastic deformation (SPD) processes for metals
2008
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel
2015
Thermodynamics of concentrated solid solution alloys
2017
Modeling the deformation textures and microstructural evolutions of a Fe–Mn–C TWIP steel during tensile and shear testing
2012
Severe plastic deformation of a TWIP steel
2013
Application of a Dislocation Density-Based Constitutive Model to Al-Alloyed TWIP Steel
2013
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel
2014
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics
2014
Characterization and Prediction of Flow Behavior in High-Manganese Twinning Induced Plasticity Steels: Part I. Mechanism Maps and Work-Hardening Behavior
2011
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
On the applicability of recovery-annealed Twinning-Induced Plasticity steels: Potential and limitations
2015
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
2009 Standout
Effect of grain boundary engineering on hydrogen embrittlement in Fe-Mn-C TWIP steel at various strain rates
2018
Caliber-rolled TWIP steel for high-strength wire rods with enhanced hydrogen-delayed fracture resistance
2012
Effects of Cyclic Pre-straining on Mechanical Properties of an Austenitic Microalloyed High-Mn Twinning-induced Plasticity Steel
2014
Recent progress in microstructural hydrogen mapping in steels: Quantification, kinetic analysis, and multi-scale characterisation
2017
Tensile deformation behavior of Fe–Mn–C TWIP steel with ultrafine elongated grain structure
2012
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding
2012
Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests
2010
Crystal plasticity modeling of texture development and hardening in TWIP steels
2012
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure
2011
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Hall-Petch Relationship of a TWIP Steel
2009
The effect of grain size on the twin initiation stress in a TWIP steel
2015
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
2015
Strain hardening behavior of a Fe–18Mn–0.6C–1.5Al TWIP steel
2009
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling
2019
Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding
2018 Standout
Fatigue behavior of high-Mn TWIP steels
2009
A precipitation-hardened high-entropy alloy with outstanding tensile properties
2015 Standout
Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure
2017
The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel
2010
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
2019 Standout
Flow stress analysis of TWIP steel via the XRD measurement of dislocation density
2010
Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr18 FCC solid solution alloy
2015
Investigation on microstructure development and mechanical properties of large-load and low-speed friction stir welded Cu-30Zn brass joint
2018
Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope
2009
Microstructural evolution and mechanical strengthening mechanism of Mg-3Sn-1Mn-1La alloy after heat treatments
2018
Strengthening an austenitic Fe–Mn steel using nanotwinned austenitic grains
2012
Hydrogen embrittlement in different materials: A review
2018 Standout
Improved tensile properties of partially recrystallized submicron grained TWIP steel
2009
Transmission electron microscopy observation of a deformation twin in TWIP steel by anex situtensile test
2011
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe–18Mn–0.6C–1.5Al TWIP steel
2009
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
In situ neutron diffraction study of the microstructure and tensile deformation behavior in Al-added high manganese austenitic steels
2012
Twinning-induced plasticity (TWIP) steels
2017 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding
2015
Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process
2009
Performance and Characterization of TWIP Steels for Automotive Applications
2013
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
High-entropy alloys
2019 Standout
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
High-cycle fatigue behavior of ultrafine-grained austenitic stainless and TWIP steels
2010
Reducing Vehicle Weight and Improving U.S. Energy Efficiency Using Integrated Computational Materials Engineering
2012 Standout
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
A review on the visible light active titanium dioxide photocatalysts for environmental applications
2012 Standout
Fatigue Behavior of Four High-Mn Twinning Induced Plasticity Effect Steels
2010
Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging
2013
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
High-Entropy Alloys: A Critical Review
2014 Standout
Works of Daisuke Terada being referenced
Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure
2014
Microstructure and mechanical properties of commercial purity titanium severely deformed by ARB process
2007
Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel
2015
Optimizing strength and ductility in Cu–Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing
2014
Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel
2016
Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy
2014
Effect of grain size distribution on mechanical properties of ultrafine grained Al severely deformed by ARB process and subsequently annealed
2010
Effect of SiC particles on the microstructure evolution and mechanical properties of aluminum during ARB process
2011
Managing Both Strength and Ductility in Ultrafine Grained Steels
2008
Concurrent strengthening of ultrafine-grained age-hardenable Al-Mg alloy by means of high-pressure torsion and spinodal decomposition
2017
Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers
2009
Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure
2008
Strengthening of A2024 alloy by high-pressure torsion and subsequent aging
2017
Anodic oxide nanotube layers on Ti–Ta alloys: Substrate composition, microstructure and self-organization on two-size scales
2008