Standout Papers
Citation Impact
Citing Papers
Water Harvesting at the Single-Crystal Level
2023 StandoutNobel
Recycling lithium-ion batteries from electric vehicles
2019 StandoutNature
An experimental study on biomass air–steam gasification in a fluidized bed
2004 Standout
Production of sugars from wood using high‐pressure hydrogen chloride
1983
A review of dry (CO2) reforming of methane over noble metal catalysts
2014 Standout
Effects of Interparticle Force on the Packing of Spherical Granular Material
2001
Carbon Nanotube Mass Production: Principles and Processes
2011
Generation of hydrogen rich gas through fluidized bed gasification of biomass
2010
A Cost‐Effective Supercapacitor Material of Ultrahigh Specific Capacitances: Spinel Nickel Cobaltite Aerogels from an Epoxide‐Driven Sol–Gel Process
2009 Standout
Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed
2009 Standout
Measuring the flowing properties of powders and grains
2012
A review on applications and challenges of nanofluids
2011 Standout
Sewage sludge pyrolysis for liquid production: A review
2012
Effect of Aggregation Kinetics on the Thermal Conductivity of Nanoscale Colloidal Solutions (Nanofluid)
2006 Standout
Design of gas distributors and prediction of bubble size in large gas—solids fluidized beds
1972
Ca(OH) 2 /CaO reversible reaction in a fluidized bed reactor for thermochemical heat storage
2014
Passive solar heating of buildings using a fluidized bed plus Trombe wall system
1991
Discrete particle simulation of particulate systems: Theoretical developments
2007 Standout
Design study of a 150kWth double loop circulating fluidized bed reactor system for chemical looping combustion with focus on industrial applicability and pressurization
2010
Van der Waals and other cohesive forces affecting powder fluidization
1989
Progress in Chemical-Looping Combustion and Reforming technologies
2011 Standout
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
2014 Standout
Fluorine and Carbon Codoped Macroporous Titania Microspheres: Highly Effective Photocatalyst for the Destruction of Airborne Styrene under Visible Light
2008
Atomic Layer Deposition Functionalized Composite SOFC Cathode La0.6Sr0.4Fe0.8Co0.2O3-δ -Gd0.2Ce0.8O1.9: Enhanced Long-Term Stability
2013 StandoutNobel
CO2 capture from atmospheric air via consecutive CaO-carbonation and CaCO3-calcination cycles in a fluidized-bed solar reactor
2008
Quantitative predictions of gas-particle flow in a vertical pipe with particle-particle interactions
1995
Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics
1997
Kinetic and Reaction Engineering Studies of Dry Reforming of Methane over a Ni/La/Al2O3 Catalyst
1997
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
2018 Standout
Comparison of Density of Stainless Steel 316L Parts Produced with Selective Laser Melting using Different Powder Grades
2009
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors: Modelling the impact of biomass shrinkage
2009
Metering and dispensing of powder; the quest for new solid freeforming techniques
2007
Chemistry of Aerogels and Their Applications
2002 Standout
Chemical Routes for the Transformation of Biomass into Chemicals
2007 Standout
Optimization of char and tar conversion in fluidized bed biomass gasifiers
2011
Review of convective heat transfer enhancement with nanofluids
2009 Standout
Regeneration of spent catalysts in oxy-combustion atmosphere
2009
Direct Capture of CO2 from Ambient Air
2016 Standout
Particle‐scale modelling of gas–solid flow in fluidisation
2003
Atomic Layer Deposition: An Overview
2009 Standout
Study of mixing in gas-fluidized beds using a DEM model
2001
High-Frequency Water Vapor Sorption Cycling Using Fluidization of Metal-Organic Frameworks
2020
Use of discrete element method simulation in studying fluidization characteristics: influence of interparticle force
2001
Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
2010 Standout
Recent developments in solids mixing
1990
Advances in the Development of Novel Cobalt Fischer−Tropsch Catalysts for Synthesis of Long-Chain Hydrocarbons and Clean Fuels
2007 Standout
Techno‐Economic Comparison of a 7‐MWth Biomass Chemical Looping Gasification Unit with Conventional Systems
2015
Aerogel catalysts
1991
Numerical simulation of cohesive powder behavior in a fluidized bed
1998
Recent development in the treatment of oily sludge from petroleum industry: A review
2013 Standout
Numerical simulation and experimental analysis of gas/solid flow systems: 1999 Fluor-Daniel Plenary lecture
2001
Biomass-based chemical looping technologies: the good, the bad and the future
2017 Standout
Water escape structures in coarse‐grained sediments
1975
Aggregation behavior of nanoparticles in fluidized beds
2005
A review of the current work potential of a trombe wall
2020 Standout
Maleic anhydride from C-4 feedstocks using fluidized bed reactors
1987
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
2013 Standout
Lagrangian approach for simulating the gas-particle flow structure in a circulating fluidized bed riser
2002
Analysis of a hydrometallurgical route to recover base metals from spent rechargeable batteries by liquid–liquid extraction with Cyanex 272
2006
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Two phase biomass air-steam gasification model for fluidized bed reactors: Part I—model development
2002
Force measurements with the atomic force microscope: Technique, interpretation and applications
2005 Standout
On the Electron‐Transfer Mechanism in the Contact‐Electrification Effect
2018 Standout
Why Capture CO 2 from the Atmosphere?
2009 StandoutScience
Detailed Modeling of Biomass Gasification in Dual Fluidized Bed Reactors under Aspen Plus
2012
Macroscopic modelling of fluid dynamics in large-scale circulating fluidized beds
2006
Passive building energy savings: A review of building envelope components
2011 Standout
Mechanisms of catalyst deactivation
2001 Standout
Characterization of powder flow: Static and dynamic testing
2009
Carbon Nanotubes: Present and Future Commercial Applications
2013 StandoutScience
Structure of Low-Density Nanoporous Dielectrics Revealed by Low-Vacuum Electron Microscopy and Small-Angle X-ray Scattering
2006
Onset of cohesive behaviour in gas fluidized beds: a numerical study using DEM simulation
2001
Design and Fluid Dynamic Analysis of a Bench-Scale Combustion System with CO2 Separation−Chemical-Looping Combustion
2005
An overview of advances in biomass gasification
2016 Standout
An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
2014
Brownian-Motion-Based Convective-Conductive Model for the Effective Thermal Conductivity of Nanofluids
2005
Hydrodynamic modelling of circulating fluidised beds
1994
Discrete particle-continuum fluid modelling of gas–solid fluidised beds
2002
Nanocoating individual cohesive boron nitride particles in a fluidized bed by ALD
2004
Powder flowability and density ratios: the impact of granules packing
2003
Granular solids, liquids, and gases
1996 Standout
Semiconductor-based Photocatalytic Hydrogen Generation
2010 Standout
Dense, vertical gas‐solid flow in a pipe
1992
An electrically actuated molecular toggle switch
2017 StandoutNobel
Vibro-fluidization of fine boron nitride powder at low pressure
2001
Revista Brasileira de geociencias
1976 Standout
Functionalization of fine particles using atomic and molecular layer deposition
2011
Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: A hard-sphere approach
1996
Syngas production from South African coal sources using Sasol–Lurgi gasifiers
2005
Applications of hybrid organic–inorganic nanocomposites
2005 Standout
Estimation of bubble diameter in gaseous fluidized beds
1975 Standout
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
2017 Standout
Aggregation and Deposition of Engineered Nanomaterials in Aquatic Environments: Role of Physicochemical Interactions
2010 Standout
A review of attrition and attrition test methods
1987
Contact electrification of insulating materials
2011
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
A bubbling fluidization model using kinetic theory of granular flow
1990 Standout
Flow characterization in high-velocity fluidized beds using pressure fluctuations
1988
Computation of flow patterns in circulating fluidized beds
1990
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
An Integrated Dual Ultrasonic Selective Powder Dispensing Platform for Three-Dimensional Printing of Multiple Material Metal/Glass Objects in Selective Laser Melting
2018
The role of meso-scale structures in rapid gas–solid flows
2001 Standout
Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources
2019 Standout
Latent heat storage with tubular-encapsulated phase change materials (PCMs)
2014
Packing of fine powders subjected to tapping
1994
Coating Fine Nickel Particles with Al 2 O 3 Utilizing an Atomic Layer Deposition‐Fluidized Bed Reactor (ALD–FBR)
2004
A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles
2012 Standout
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
A review of carbon nanotube purification by microwave assisted acid digestion
2009
Numerical simulation of metallic solid bridging particles in a fluidized bed at high temperature
2000
Porosity distributions in a fluidized bed with an immersed obstacle
1989
Additive manufacturing of metals
2016 Standout
Fluidized-bed incineration of waste materials
1994
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Works of D. Geldart being referenced
The expansion of bubbling fluidised beds
1968
Fluidization of powders showing degrees of cohesiveness—II. Experiments on rates of de-aeration
1985
The effect of particle size and size distribution on the behaviour of gas-fluidised beds
1972
Fluidization of cohesive powders
1984
Inter-particle forces in cohesive powders studied by AFM: effects of relative humidity, particle size and wall adhesion
2003
Behaviour of gas-fluidized beds of fine powders part II. Voidage of the dense phase in bubbling beds
1980
Characterisation of dry powders
2008
Hydrodynamics of Gas-Solids Fluidization
1985
The behaviour of L-valves with granular powders
1991
Gas fluidization technology
1986
A model for the circulating fluidized bed
1987
Segregation in beds of large particles at high velocities
1981
Estimation of basic particle properties for use in fluid—particle process calculations
1990
Types of gas fluidization
1973 Standout
The size and frequency of bubbles in two- and three-dimensional gas-fluidised beds
1970
Large particle fluidisation
1974
Fluidization of powders showing degrees of cohesiveness—I. Bed expansion
1984
Behaviour of gas-fluidized beds of fine powders part I. Homogeneous expansion
1980
Interaction of fine and coarse particles in the freeboard of a fluidized bed
1983
Fluidization Engineering
1969
Static electrification in fluidised beds
1969
The use of bulk density measurements as flowability indicators
1999
Flow regimes in vertical gas-solid contact systems
1976