Citation Impact
Citing Papers
3C strategy for inverters in parallel operation achieving an equal current distribution
2000
Predictive Approach to Increase Efficiency and Reduce Switching Losses on Matrix Converters
2009
Input-Admittance Calculation and Shaping for Controlled Voltage-Source Converters
2007 Standout
Predictive Strategy to Control Common-Mode Voltage in Loads Fed by Matrix Converters
2008
Design and loss comparison of matrix converters, and voltage-source converters for modern AC drives
2002
Future on Power Electronics for Wind Turbine Systems
2013 Standout
Impedance Identification Procedure of Three-Phase Balanced Voltage Source Inverters Based on Transient Response Measurements
2011
Design and Control of an LCL-Filter-Based Three-Phase Active Rectifier
2005 Standout
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Line Current Distortion Compensation for DCM/CRM Boost PFC Converters
2015
Recent Advances and Industrial Applications of Multilevel Converters
2010 Standout
AC-microgrids versus DC-microgrids with distributed energy resources: A review
2013 Standout
Multimodular Matrix Converters With Sinusoidal Input and Output Waveforms
2011
Control of a Matrix Converter With Imposed Sinusoidal Source Currents
2011
Grid-Synchronization Stability of Converter-Based Resources—An Overview
2020 Standout
Hierarchical Structure of Microgrids Control System
2012 Standout
A Comparative Assessment of Model Predictive Current Control and Space Vector Modulation in a Direct Matrix Converter
2012
Model Predictive Control for Power Converters and Drives: Advances and Trends
2016 Standout
Development of MCs and its Applications in Industry [Industry Forum]
2011
A Review of LED Drivers and Related Technologies
2017 Standout
Predictive Current Control of an Induction Machine Fed by a Matrix Converter With Reactive Power Control
2008
Modeling of Three-Phase Dynamic Systems Using Complex Transfer Functions and Transfer Matrices
2007 Standout
Design and implementation of three-phase AC impedance measurement unit (IMU) with series and shunt injection
2013
Analysis of D-Q Small-Signal Impedance of Grid-Tied Inverters
2015 Standout
Constrained Optimal Control of the Step-Down DC–DC Converter
2008
Predictive strategy to reduce common-mode voltages on power converters
2008
Average-Value Model of Electric Vehicle Chargers
2013
State of the Art of Finite Control Set Model Predictive Control in Power Electronics
2012 Standout
A Review of Three-Phase Improved Power Quality AC–DC Converters
2004 Standout
Matrix converters: a technology review
2002
Analysis of the Passive Damping Losses in LCL-Filter-Based Grid Converters
2012 Standout
The age of multilevel converters arrives
2008 Standout
Improved Sensorless Vector Control for Induction Motor Drives Fed by a Matrix Converter Using Nonlinear Modeling and Disturbance Observer
2006
Analysis of Phase-Locked Loop Low-Frequency Stability in Three-Phase Grid-Connected Power Converters Considering Impedance Interactions
2014 Standout
Small-Signal Modeling and Stability Prediction of Parallel Droop-Controlled Inverters Based on Terminal Characteristics of Individual Inverters
2019
Experimental verification of the Generalized Nyquist stability criterion for balanced three-phase ac systems in the presence of constant power loads
2012
Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles
2012 Standout
New Time-Discrete Modulation Scheme for Matrix Converters
2005
Shunt Active-Power-Filter Topology Based on Parallel Interleaved Inverters
2008
Predictive Control of an Induction Machine Fed by a Matrix Converter With Increased Efficiency and Reduced Common-Mode Voltage
2014
An Analytical Investigation of DC/DC Power Electronic Converters With Constant Power Loads in Vehicular Power Systems
2008
Hybrid Model Predictive Control of the Step-Down DC–DC Converter
2008
Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications
2017 Standout
Positive-Feedback-Based Active Anti-Islanding Schemes for Inverter-Based Distributed Generators: Basic Principle, Design Guideline and Performance Analysis
2010
DC Microgrids–Part I: A Review of Control Strategies and Stabilization Techniques
2015 Standout
Evolution of Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
2017 Standout
Impedance-Based Analysis of Grid-Synchronization Stability for Three-Phase Paralleled Converters
2015
Boundary Control of Boost Converters Using State-Energy Plane
2008
Impedance-Based Stability Criterion for Grid-Connected Inverters
2011 Standout
Predictive Torque Control of an Induction Machine Fed by a Matrix Converter With Reactive Input Power Control
2010
Detailed and Averaged Models for a 401-Level MMC–HVDC System
2012 Standout
Research on a Novel Capacitor Clamped Multilevel Matrix Converter
2005
Modeling and analysis of static and dynamic characteristics for buck-type three-phase PWM rectifier by circuit DQ transformation
1998
Multiresonant Frequency-Locked Loop for Grid Synchronization of Power Converters Under Distorted Grid Conditions
2010 Standout
Reduction of switching losses and increase in efficiency of power converters using predictive control
2008
Direct Voltage Control of DC–DC Boost Converters Using Enumeration-Based Model Predictive Control
2013
Novel reduced-order small-signal model of a three-phase PWM rectifier and its application in control design and system analysis
1998
Dynamic Behavior and Stabilization of DC Microgrids With Instantaneous Constant-Power Loads
2010
Milestones in Matrix Converter Research
2012
Energy storage systems for advanced power applications
2001 Standout
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
2016 Standout
Optimal Damping of EMI Filter Input Impedance
2011
Overview of Multi-MW Wind Turbines and Wind Parks
2011 Standout
Design of a power-factor-correction converter based on half-bridge topology
1999
Application of a synchronous generator with a boost converter in wind turbines: an experimental overview
2012
Control of Parallel Multiple Converters for Direct-Drive Permanent-Magnet Wind Power Generation Systems
2011
Modeling, analysis, and application of buck converters in discontinuous-input-voltage mode operation
1997
A review of single-phase improved power quality ac~dc converters
2003 Standout
Predictive torque control with input PF correction applied to an induction machine fed by a matrix converter
2008
Model Predictive Control—A Simple and Powerful Method to Control Power Converters
2008 Standout
A Review of Control and Modulation Methods for Matrix Converters
2011
A high-efficiency electromechanical battery
1993
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
2015 Standout
Dynamic Stability of a Microgrid With an Active Load
2013
Definitions and Applications of Dynamic Average Models for Analysis of Power Systems
2010
Works of D. Borojevic being referenced
Interleaved PWM with discontinuous space-vector modulation
1999
Space vector modulator for forced commutated cycloconverters
2003
A new control algorithm for three-phase PWM buck rectifier with input displacement factor compensation
1994
Input filter design for power factor correction circuits
1996
Modeling and control of a synchronous generator with an active DC load
2000
Robust nonlinear control for boost converter
1995
Analysis, design and implementation of the space-vector modulator for forced-commutated cycloconvertors
1992
Space vector modulated three-phase to three-phase matrix converter with input power factor correction
1995
Digital-signal-processor-based control of three-phase space vector modulated converters
1994