Citation Impact
Citing Papers
Precipitation and Hardening in Magnesium Alloys
2012 Standout
Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion
2004
Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing
2003
An Evaluation of Superplastic Anisotropy after Processing by Equal-Channel Angular Pressing
2004
Partial Grain Refinement in Al-3%Cu Alloy during ECAP at Elevated Temperatures
2008
Effect of Strain Path in High-Pressure Torsion Process on Hardening in Commercial Purity Titanium
2007
Ab‐initiosimulations of materials using VASP: Density‐functional theory and beyond
2008 Standout
Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity
2019
Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing
2016
3D printing of high-strength aluminium alloys
2017 StandoutNature
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Achieving high strain rate superplasticity in an Al–Li–Mg alloy through equal channel angular extrusion
2005
Recent developments in stainless steels
2009 Standout
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
2004
The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet
2011
In-situ fabrication of Al 3 Zr aluminide reinforced AA3003 alloy composite by friction stir processing
2017
Texture evolution during equal channel angular extrusion
2004
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
Al–Ni intermetallic composites produced in situ by friction stir processing
2010
An investigation of microstructure and grain-boundary evolution during ECA pressing of pure aluminum
2002
Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification
2018
Severe plastic deformation (SPD) processes for metals
2008
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Tensile properties of an Al–11mass%Si alloy at elevated temperatures processed by rotary-die equal-channel angular pressing
2005
Grain boundary statistics in nano-structured iron produced by high pressure torsion
2004
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Continuous frictional angular extrusion and its application in the production of ultrafine-grained sheet metals
2006
Experimental Evidence for Grain‐Boundary Sliding in Ultrafine‐Grained Aluminum Processed by Severe Plastic Deformation
2005
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Reactive mechanism and mechanical properties of in-situ hybrid nano-composites fabricated from an Al–Fe2O3 system by friction stir processing
2017
Orientation imaging microscopy of ultrafine-grained nickel
2002
Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP
2007
Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al–Mn–Sc alloy fabricated by selective laser melting
2020
Texture evolution in equal-channel angular extrusion
2009
Interatomic bonds and the tensile anisotropy of trialuminides in the elastic limit: a density functional study for Al3(Sc, Ti, V, Cr)
2007
Characterization of the microstructure, texture and mechanical properties of 7075 aluminum alloy in early stage of severe plastic deformation
2016
Microstructure and mechanical behavior of friction stir processed ultrafine grained Al–Mg–Sc alloy
2011
Persistent slip bands in cyclically deformed nickel polycrystals
2001
Processing techniques for functionally graded materials
2003 Standout
Response of trialuminides to [110] uniaxial loading: Anab initiostudy forAl 3 ( Sc , Ti , V )
2007
Deformation mode and plastic flow in ultra fine grained metals
2005
In-situ aluminum matrix composite produced by friction stir processing using FE particles
2015
Effect of deformation temperature on microstructure evolution in aluminum alloy 2219 during hot ECAP
2007
Towards the development of heat-treatable high-strength wrought Mg alloys
2010
Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing
2015
In situ formation of Al–Al3Ni composites on commercially pure aluminium by friction stir processing
2014
Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing
2002
High Tensile Ductility and Strength in Bulk Nanostructured Nickel
2008
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion
2004
Texture evolution during multi-pass equal channel angular extrusion of copper: Neutron diffraction characterization and polycrystal modeling
2005
Mechanical properties of nanocrystalline materials
2005 Standout
Development of in situ composites via reactive friction stir processing of Ti–B4C system
2019
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Texture evolution during equal channel angular extrusion (ECAE)
2004
Characterization of Y2O3 particles reinforced AA6082 aluminum matrix composites produced using friction stir processing
2019
Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening
2009
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
On the correlation between indentation hardness and tensile strength in friction stir processed materials
2020
Scaling up of Equal Channel Angular Pressing (ECAP) for the Production of Forging Stock
2006
Effect of Annealing on Thermal Stability, Precipitate Evolution, and Mechanical Properties of Cryorolled Al 7075 Alloy
2011
Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing
2005
Evaluation of three-dimensional orientation of Al3Ti platelet in Al-based functionally graded materials fabricated by a centrifugal casting technique
2001
Effect of friction stir processing parameters on the microstructural and electrical properties of copper
2015
General relationship between strength and hardness
2011 Standout
Heterogeneity of deformation texture in equal channel angular extrusion of copper
2004
Roles of microstructure in fatigue crack initiation
2009 Standout
Friction Stir Processing of Al-TiB2 In Situ Composite: Effect on Particle Distribution, Microstructure and Properties
2015
Constrained groove pressing and its application to grain refinement of aluminum
2002
Producing of AZ91/SiC composite by friction stir processing (FSP)
2010
Cryogenic friction-stir processing of ultrafine-grained Al–Mg–TiO2 nanocomposites
2014
Strain rate sensitivity of ultrafine-grained aluminium processed by severe plastic deformation
2005
Characterization of molybdenum particles reinforced Al6082 aluminum matrix composites with improved ductility produced using friction stir processing
2017
Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
2011
Friction Stir Processing Of Intermetallic particulate Reinforced Aluminum Matrix composite
2013
Strain Rate Sensitivity, Work Hardening, and Fracture Behavior of an Al-Mg TiO2 Nanocomposite Prepared by Friction Stir Processing
2014
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles
2014
Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475
2008
Reactive mechanism and mechanical properties of in situ composites fabricated from an Al–TiO2 system by friction stir processing
2012
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites
2015
Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships
2017
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
2017
Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles
2011
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
Aluminium based in-situ composite fabrication through friction stir processing: A review
2017
Microstructure and mechanical properties of Al–Fe in situ nanocomposite produced by friction stir processing
2008
The evolution of homogeneity in processing by high-pressure torsion
2006
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with $${{\rm Al}_{2}{\rm O}_{3}/0.5\,{\rm Gr}}$$ Al 2 O 3 / 0.5 Gr Hybrid Surface Nanocomposite
2014
Effect of additional processing on texture evolution of Al0.5Cu alloy processed by equal channel angular extrusion (ECAE)
2004
Aluminum based in situ nanocomposite produced from Al–Mg–CuO powder mixture by using friction stir processing
2013
Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening
2017
The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum
2006
Dependence of intergranular fatigue cracking on the interactions of persistent slip bands with grain boundaries
2003
Microstructure evolution in Zr under equal channel angular pressing
2002
Friction-stir processing of an AA8026-TiB 2 -Al 2 O 3 hybrid nanocomposite: Microstructural developments and mechanical properties
2016
Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing
2015
Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing
2012
Mechanical properties and microstructure changes of proton exchange membrane under immersed conditions
2013
Friction stir processing of an aluminum-magnesium alloy with pre-placing elemental titanium powder: In-situ formation of an Al3Ti-reinforced nanocomposite and materials characterization
2015
Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing
2014
Continuous dynamic recrystallization in an Al–Li–Mg–Sc alloy during equal-channel angular extrusion
2005
Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds
2010
Modeling of texture evolution in copper under equal channel angular pressing
2003
Development of ultrafine grained Al–Mg–Si alloy with enhanced strength and ductility
2008
Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing
2018
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Surface composites by friction stir processing: A review
2015
Revealing the relationship between grain size and corrosion rate of metals
2010 Standout
High-entropy alloy: challenges and prospects
2015 Standout
Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation
2017
Effect of pressing temperature on fine-grained structure formation in 7475 aluminum alloy during ECAP
2004
Tribological and mechanical behavior of particulate aluminum matrix composites
2014
In-situ formation of Al2O3 nanoparticles during friction stir processing of AlSiO2 composite
2013
Microstructure and texture development of copper single crystals deformed by equal-channel angular pressing
2004
Cyclic deformation behaviour of a copper bicrystal with common primary slip planes
2001
Grain refinement in a commercial Al–Mg–Sc alloy under hot ECAP conditions
2006
Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation
2009
Tensile and compressive properties of AISI 304L stainless steel subjected to equal channel angular pressing
2007
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature
2008
Friction stir processing of spark plasma sintered aluminum matrix composites with bimodal micro- and nano-sized reinforcing Al2O3 particles
2018
Friction stir welding of aluminium alloys
2009 Standout
Microstructural characteristics of ultrafine-grained aluminum produced by equal channel angular extrusion
2002
Combined effects of grain size and recrystallization on the tensile properties of cryorolled pure vanadium
2009
Thermal stability of ECAP processed pure copper
2007
Work-softening behavior of the ultrafine-grained Al alloy processed by high-strain-rate, dissimilar-channel angular pressing
2003
The microstructural characteristics of ultrafine-grained nickel
2004
Mechanically-induced grain coarsening in gradient nano-grained copper
2016
Back pressure equal channel angular consolidation of pure Al particles
2005
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Microstructural evolution and mechanical properties of ultrafine grained Al3Ti/Al–5.5Cu composites produced via hot pressing and subsequent friction stir processing
2012
Ultrafine-Grain Structure Formation in an Al-Mg-Sc Alloy During Warm ECAP
2012
Simultaneously Increasing the Ductility and Strength of Ultra‐Fine‐Grained Pure Copper
2006
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
2007
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
The microstructure and mechanical properties of an Al–CuO in-situ composite produced using friction stir processing
2012
Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
2012
Fabrication and characterization of in-situ Al/Nb metal/intermetallic surface composite by friction stir processing
2017
Strategy for Achieving High Strength in Al-Mg-Sc Alloys by Intense Plastic Straining
2012
The influence of ECAP temperature on the stability of Al–Zn–Mg–Cu alloy
2004
The effect of second-phase particles on grain refinement during equal-channel angular pressing in an Al–Cu–Mg–Ag alloy
2014
Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al11Ce3-Al2O3 In-Situ Composite Produced by Friction Stir Processing
2009
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature
2011
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Tensile testing of ultra fine grained metals
2006
Cyclic deformation and fatigue properties of very fine-grained metals and alloys
2009
Reactive friction stir processing of AA 5052–TiO2 nanocomposite: process–microstructure–mechanical characteristics
2014
Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al–Sc alloy
2004
Yielding behavior and its effect on uniform elongation in IF steel with various grain sizes
2014
Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al–Mg–TiO2 nanocomposites
2014
Grain refinement of pure nickel using equal-channel angular pressing
2002
Observations and issues on mechanisms of grain refinement during ECAP process
2000
The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques
2010
Microstructural evolution and grain subdivision mechanisms during severe plastic deformation of aluminum particles by ball milling
2015
Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear
2005
Microstructure of ECAP severely deformed iron and its mechanical properties
2004
Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting
2012
Review: Processing of metals by equal-channel angular pressing
2001
In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing
2012
Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed
2009
Impact toughness of an ultrafine-grained Al–11mass%Si alloy processed by rotary-die equal-channel angular pressing
2004
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of C.P. Chang being referenced
Improvement of strength of magnesium alloy processed by equal channel angular extrusion
2008
Evolution of microstructure during annealing of a severely deformed aluminum
2003
Effects of Humidification on the Membrane Electrode Assembly of Proton Exchange Membrane Fuel Cells at Relatively High Cell Temperatures
2011
Grain size effect on deformation twinning in Mg–Al–Zn alloy
2013
Al–Al3Ti nanocomposites produced in situ by friction stir processing
2006
Transition of tensile deformation behaviors in ultrafine-grained aluminum
2005
X-ray characterisation of size, strain and texture inhomogeneities in ultra fine grained copper processed by equal channel angular extrusion
2000
The strengthening effect of Al3Ti in ultrafine grained Al-Al3Ti alloys
1999
Dislocation structures of persistent slip bands in cyclically deformed polycrystalline copper
1998
Dislocation-free zones in fatigued copper polycrystals
1996
Characteristics of submicron grained structure formed in aluminum by equal channel angular extrusion
2000
Mechanical properties of submicron-grained aluminum
2004
Influence of boundary characters on the tensile behavior of sub-micron-grained aluminum
2004
Effects of Processing Parameters on the Grain Refinement of Magnesium Alloy by Equal-Channel Angular Extrusion
2009
Microstructure and flow stress of copper deformed to large plastic strains
2001
Formation of Al–Mo intermetallic particle-strengthened aluminum alloys by friction stir processing
2012
Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion
2002
Effect of deformation temperature on the microstructure developed in commercial purity aluminum processed by equal channel angular extrusion
2003
The effect of strain path and temperature on the microstructure developed in copper processed by ECAE
2003
The tensile behavior and deformation microstructure of cryo-rolled and annealed pure nickel
2005
The distribution of dislocation walls in the early processing stage of equal channel angular extrusion
2004
Effect of die angle on the deformation texture of copper processed by equal channel angular extrusion
2001
Deformation induced grain boundaries in commercially pure aluminium
2000
The effect of extrusion temperature on the development of deformation microstructures in 5052 aluminium alloy processed by equal channel angular extrusion
2003