Citation Impact
Citing Papers
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
2013 Standout
Scaffolds Based Bone Tissue Engineering: The Role of Chitosan
2011
Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
2010
Fabrication and Characterization of Poly(Propylene Fumarate) Scaffolds with Controlled Pore Structures Using 3-Dimensional Printing and Injection Molding
2006
Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography
2004
Additive manufacturing: technology, applications and research needs
2013 Standout
Salt Fusion: An Approach to Improve Pore Interconnectivity within Tissue Engineering Scaffolds
2002
Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication
2013
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
2007
Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering
2006
Trends in the design of nerve guidance channels in peripheral nerve tissue engineering
2015
A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics
2011 Standout
Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds
2002
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Structural, mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming
2005
Bone repair by cell‐seeded 3D‐bioplotted composite scaffolds made of collagen treated tricalciumphosphate or tricalciumphosphate‐chitosan‐collagen hydrogel or PLGA in ovine critical‐sized calvarial defects
2010
Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications
2005
Hydrogels in Regenerative Medicine
2009 Standout
Bone Tissue Engineering: State of the Art and Future Trends
2004 Standout
Current trends in the design of scaffolds for computer-aided tissue engineering
2013
Bacterial and Candida albicans adhesion on rapid prototyping‐produced 3D‐scaffolds manufactured as bone replacement materials
2008
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
2010
Polymers as Biomaterials for Tissue Engineering and Controlled Drug Delivery
2006
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
2006 Standout
Engineering functionally graded tissue engineering scaffolds
2007
Fabrication of low cost soft tissue prostheses with the desktop 3D printer
2014
Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds
2010
Levofloxacin implants with predefined microstructure fabricated by three-dimensional printing technique
2007
Development of a 95/5 poly(L ‐lactide‐co‐glycolide)/hydroxylapatite and β‐tricalcium phosphate scaffold as bone replacement material via selective laser sintering
2007
The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering
2009 Standout
Schwarz meets Schwann: Design and fabrication of biomorphic and durataxic tissue engineering scaffolds
2006
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
Cells on chips
2006 StandoutNature
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
2012
A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites
2016
Comparison of drying methods in the fabrication of collagen scaffold via indirect rapid prototyping
2006
Designing peptide based nanomaterials
2008 Standout
Collagen-Hydroxyapatite Composites for Hard Tissue Repair
2006
Recent advances in 3D printing of biomaterials
2015
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
2011
Jet‐based methods to print living cells
2006
Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
2010
3D bioactive composite scaffolds for bone tissue engineering
2017 Standout
Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering
2009
A two-scale Weibull approach to the failure of porous ceramic structures made by robocasting: Possibilities and limits
2012
Mechanical and in vitro performance of apatite–wollastonite glass ceramic reinforced hydroxyapatite composite fabricated by 3D-printing
2009
Porosity of 3D biomaterial scaffolds and osteogenesis
2005 Standout
A review of materials, fabrication methods, and strategies used to enhance bone regeneration in engineered bone tissues
2007
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
2016
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
2015 Standout
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
A review of rapid prototyping techniques for tissue engineering purposes
2008
3D bioprinting of tissues and organs
2014 Standout
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
2012
45S5 Bioglass®-derived glass–ceramic scaffolds for bone tissue engineering
2005 Standout
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
2004
Medical applications of organic–inorganic hybrid materials within the field of silica-based bioceramics
2010
Three-dimensional tissue fabrication
2004
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
2012 Standout
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
2016
Progress of key strategies in development of electrospun scaffolds: bone tissue
2012
Fiber-based tissue engineering: Progress, challenges, and opportunities
2012
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
2007
The effects of collagen concentration and crosslink density on the biological, structural and mechanical properties of collagen-GAG scaffolds for bone tissue engineering
2008
Capturing complex 3D tissue physiology in vitro
2006 Standout
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
2007
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
2005 Standout
Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants
2007
Porous scaffold design for tissue engineering
2005 Standout
Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering
2010
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
2016 Standout
Three-Dimensional Printing in Pharmaceutics: Promises and Problems
2008
Inkjet Printing—Process and Its Applications
2009 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
2008
Application of inkjet printing to tissue engineering
2006
The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds
2012
Self-folding devices and materials for biomedical applications
2011
Bioprinting technology and its applications
2014
Cell-laden microengineered gelatin methacrylate hydrogels
2010 Standout
Porous scaffold design using the distance field and triply periodic minimal surface models
2011
Fabrication and characterization of sol–gel derived 45S5 Bioglass®–ceramic scaffolds
2011
Bioinspired structural materials
2014 Standout
Finite Element Method (FEM), Mechanobiology and Biomimetic Scaffolds in Bone Tissue Engineering
2011
Scaffold Translation: Barriers Between Concept and Clinic
2011
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Water‐soluble photopolymers for rapid prototyping of cellular materials
2005
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
2008
Three‐dimensional printed PCL ‐hydroxyapatite scaffolds filled with CNT s for bone cell growth stimulation
2015
Direct metal laser fabrication: machine development and experimental work
2009
Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering: Microstructural characterization
2007
Advances in engineering hydrogels
2017 StandoutScience
Supramolecular Polymerization
2009 Standout
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Selective laser sintering of HIPS and investment casting technology
2008
Resorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder Printing
2007
Electrospun nanofibres to mimic natural hierarchical structure of tissues: application in musculoskeletal regeneration
2016
Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting
2009
Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices
2018
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
2014
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
2016
Biomimetic 4D printing
2016 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
PCL/Alginate Composite Scaffolds for Hard Tissue Engineering: Fabrication, Characterization, and Cellular Activities
2014
Selective laser sintering of polymer biocomposites based on polymethyl methacrylate
2014
Calcium silicate ceramic scaffolds toughened with hydroxyapatite whiskers for bone tissue engineering
2014
Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
2014
Fabrication of customised scaffolds using computer‐aided design and rapid prototyping techniques
2005
Photodegradable Hydrogels for Dynamic Tuning of Physical and Chemical Properties
2009 StandoutScience
Organ Printing: Promises and Challenges
2007
Programmed assembly of 3-dimensional microtissues with defined cellular connectivity
2009 StandoutNobel
Composite rapid prototyping: overcoming the drawback of poor mechanical properties
2004
An exploration of binder jetting of copper
2015
Effect of SiC particles on the laser sintering of Al–7Si–0.3Mg alloy
2008
Biomaterials in cardiac tissue engineering: Ten years of research survey
2008
Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders
2009
Bone ingrowth in porous titanium implants produced by 3D fiber deposition
2007
Preparation of complex porous scaffolds via selective laser sintering of poly(vinyl alcohol)/calcium silicate
2014
Hydrogel bioelectronics
2018 Standout
Microfluidic Chip-Based Fabrication of PLGA Microfiber Scaffolds for Tissue Engineering
2008
Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography
2009
Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres
2007
Biodegradable polymers as biomaterials
2007 Standout
Regeneration of trabecular bone using porous ceramics
2003
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
2015
Prototypes for Bone Implant Scaffolds Designed via Topology Optimization and Manufactured by Solid Freeform Fabrication
2010
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery
2014
Selective Laser Sintering of PEEK
2007
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
2005
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
2008
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
2009
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
An integrated approach of topology optimized design and selective laser melting process for titanium implants materials
2013
Engineering Increased Stability into Self‐Assembled Protein Fibers
2006
Materials for additive manufacturing
2017
Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
2015
Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
2011
Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing
2009
Laser Fabrication of Three-Dimensional CAD Scaffolds from Photosensitive Gelatin for Applications in Tissue Engineering
2011
Encapsulation and release of biomolecules from Ca–P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering
2010
Selective Laser Sintering of Si<sub>3</sub>N<sub>4</sub> and Al<sub>2</sub>O<sub>3</sub> Ceramic Powders
2008
Bone-derived CAD library for assembly of scaffolds in computer-aided tissue engineering
2008
3D‐Printing of Lightweight Cellular Composites
2014 Standout
Layered Gradient Nonwovens of In Situ Crosslinked Electrospun Collagenous Nanofibers Used as Modular Scaffold Systems for Soft Tissue Regeneration
2013
Selective laser sintering: A qualitative and objective approach
2003
Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels
2006
Laser sintering of polyamides and other polymers
2011 Standout
Potential of cold gas dynamic spray as additive manufacturing technology
2013
Multiscale Design and Multiobjective Optimization of Orthopedic Hip Implants with Functionally Graded Cellular Material
2012
Melt electrospinning today: An opportune time for an emerging polymer process
2016
Reactive Oxygen Species (ROS)-Based Nanomedicine
2019 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Development of composite porous scaffolds based on poly(lactide-co-glycolide)/nano-hydroxyapatite via selective laser sintering
2013
Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering
2007
Fabrication and Properties of Polycaprolactone Composites Containing Calcium Phosphate-Based Ceramics and Bioactive Glasses in Bone Tissue Engineering: A Review
2017
Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces
2011
Continuous liquid interface production of 3D objects
2015 StandoutScience
3D Cell‐Migration Studies using Two‐Photon Engineered Polymer Scaffolds
2008
Additive manufacturing of multi-material structures
2018
The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering
2009
Fabrication of ZrB2–Zr cermet using laser sintering technique
2009
Study of the mechanical properties of nonwoven fibre mat reinforced photopolymers used in rapid prototyping
2003
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
2015
Designing Biomaterials for 3D Printing
2016
Scaffold Library for Tissue Engineering: A Geometric Evaluation
2012
Metal–Organic Frameworks in Biomedicine
2011 Standout
3D printing of ceramics: A review
2018 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Design and 3D Printing of Scaffolds and Tissues
2015
Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
2013
Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior
2008
Layerless fabrication with continuous liquid interface production
2016
Selective Laser Sintering of Bio-Metal Scaffold
2013
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Additive manufacturing methods and modelling approaches: a critical review
2015 Standout
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
2010
Effect of Hydroxyapatite on Biodegradable Scaffolds Fabricated by SLS
2008
Selective Laser Sintering of Hydroxyapatite Reinforced Polyethylene Composites for Bioactive Implants and Tissue Scaffold Development
2006
3D printing of open-porous cellular ceramics with high specific strength
2017
Additive Manufacturing of Ceramic‐Based Materials
2014
Biopolymer deposition for freeform fabrication of hydrogel tissue constructs
2006
3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs
2014 Standout
Composites by rapid prototyping technology
2009
3D printing of hydroxyapatite: Effect of binder concentration in pre-coated particle on part strength
2007
Selective Laser Sintering Process Optimization for Layered Manufacturing of CAPA® 6501 Polycaprolactone Bone Tissue Engineering Scaffolds
2005
Hyperelastic “bone”: A highly versatile, growth factor–free, osteoregenerative, scalable, and surgically friendly biomaterial
2016
Biomedical production of implants by additive electro-chemical and physical processes
2012
Preparation and selective laser sintering of nylon-12 coated metal powders and post processing
2009
A review on additive manufacturing of polymer-fiber composites
2017 Standout
3D Printing of Scaffolds for Tissue Regeneration Applications
2015
Polymeric materials for bone and cartilage repair
2010
Rapid prototyping in tissue engineering: challenges and potential
2004
A review of process development steps for new material systems in three dimensional printing (3DP)
2008
Additive manufacturing techniques for scaffold-based cartilage tissue engineering
2013
Works of C.M. Cheah being referenced
Selective laser sintering of biocompatible polymers for applications in tissue engineering
2005
Automatic Algorithm for Generating Complex Polyhedral Scaffold Structures for Tissue Engineering
2004
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
2003
Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends
2003
Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects
2004
Development of a Tissue Engineering Scaffold Structure Library for Rapid Prototyping. Part 2: Parametric Library and Assembly Program
2003
Origin of shrinkage, distortion and fracture of photopolymerized material
1995
Rapid prototyping and tooling techniques: a review of applications for rapid investment casting
2004
Influence of process parameters on stereolithography part shrinkage
1996
Characteristics of photopolymeric material used in rapid prototypes Part II. Mechanical properties at post-cured state
1997
Development of a Tissue Engineering Scaffold Structure Library for Rapid Prototyping. Part 1: Investigation and Classification
2003
Mechanical characteristics of fiber‐filled photo‐polymer used in stereolithography
1999
Rapid investment casting: direct and indirect approaches via fused deposition modelling
2004
Rapid Sheet Metal Manufacturing. Part 2: Direct Rapid Tooling
2002
Characterization of SLS parts for drug delivery devices
2001
Fabrication and characterization of three-dimensional poly(ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering
2005
Characteristics of photopolymeric material used in rapid prototypes Part I. Mechanical properties in the green state
1997
Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 2: Development of molding techniques for casting prosthetic parts.
2004
Characterization of microfeatures in selective laser sintered drug delivery devices
2002
Integration of laser surface digitizing with CAD/CAM techniques for developing facial prostheses. Part 1: Design and fabrication of prosthesis replicas.
2003