Citation Impact
Citing Papers
Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy
2012
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
High Strain Rate Superplasticity of Mg Based Composites Fabricated by Friction Stir Processing
2006
Feasibility of Friction Stir Welding for Joining and Microstructure Refinement in a ZK60 Magnesium Alloy
2007
Development of Fine-Grained Structure Caused by Friction Stir Welding Process of a ZK60A Magnesium Alloy
2009
On the Hardening of Friction Stir Processed Mg-AZ31 Based Composites with 5–20% Nano-ZrO<SUB>2</SUB> and Nano-SiO<SUB>2</SUB> Particles
2006
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Processing of Bulk Metallic Glass
2009 Standout
Strength and plasticity of nanolaminated materials
2016
Atomic-level structure and structure–property relationship in metallic glasses
2010 Standout
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review
2018
Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP
2005
Effect of rotation rate on microstructure and texture evolution during friction stir welding of Ti–6Al–4V plates
2015
Microstructural evolution of cast Mg–Al–Zn during friction stir processing and subsequent aging
2009
A comprehensive review on PEM water electrolysis
2013 Standout
Plasticity of Micrometer-Scale Single Crystals in Compression
2009
Microstructural Evaluation of Friction Stir Processed AZ31B-H24 Magnesium Alloy
2007
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy
2011
Size-independent strength and deformation mode in compression of a Pd-based metallic glass
2008
Mechanical behavior of nanoscale Cu/PdSi multilayers
2013
Producing of AZ91/SiC composite by friction stir processing (FSP)
2010
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
2014 StandoutScience
Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy
2008
Grain structure evolution during friction-stir welding of AZ31 magnesium alloy
2009
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel
2014
Fine grained Mg–3Al–1Zn alloy with randomized texture in the double-sided friction stir welded joints
2013
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
2019
Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation
2010
Suppression of Catastrophic Failure in Metallic Glass–Polyisoprene Nanolaminate Containing Nanopillars
2012
Microstructure evolution during friction-stir welding of AZ31 magnesium alloy
2015
Fabrication of AA6061/Al2O3 nano ceramic particle reinforced composite coating by using friction stir processing
2010
Formations of AZ91/Al2O3 nano-composite layer by friction stir processing
2016
Analysis of dynamic segregation and crystallisation in Mg65Cu25Y10 bulk metallic glass using atom probe tomography
2012
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Influence of texture on Hall–Petch relationships in an Mg alloy
2014
Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60–AZ31
2012
Texture development in friction stir welds
2011
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Record Superplastic Ductility in a Magnesium Alloy Processed by Equal‐Channel Angular Pressing
2008
Works of C.J. Lee being referenced
Using Friction Stir Processing to Fabricate Mg Based Composites with Nano Fillers
2006
Microstructure and Mechanical Properties of Nano-ZrO2 and Nano-SiO2 Particulate Reinforced AZ31-Mg Based Composites Fabricated by Friction Stir Processing
2007
Bulk and microscale compressive behavior of a Zr-based metallic glass
2008
Microscale deformation behavior of amorphous/nanocrystalline multilayered pillars
2010
Enhanced mechanical properties of multilayered micropillars of amorphous ZrCuTi and nanocrystalline Ta layers
2011
Improvement of yield stress of friction-stirred Mg–Al–Zn alloys by subsequent compression
2007
Viscous flow behavior and thermal properties of bulk amorphous Mg58Cu31Y11 alloy
2007
Strength variation and cast defect distribution in metallic glasses
2010
Cavitation characteristics in AZ31 Mg alloys during LTSP or HSRSP
2004
Texture and weak grain size dependence in friction stir processed Mg–Al–Zn alloy
2006
A nanoscaled underlayer confinement approach for achieving extraordinarily plastic amorphous thin film
2009