Citation Impact
Citing Papers
How Tough is Human Cortical Bone? In-Situ Measurements on Realistically Short Cracks
2008
Effects of Annealing and Changes in Stress State on Fracture Toughness of Bulk Metallic Glass
2001
Fracture Toughness of Zr<SUB>55</SUB>Al<SUB>10</SUB>Ni<SUB>5</SUB>Cu<SUB>30</SUB> Bulk Metallic Glass by 3-Point Bend Testing
2005
Cold-Rolled Zr<SUB>50</SUB>Cu<SUB>30</SUB>Ni<SUB>10</SUB>Al<SUB>10</SUB> Bulk Amorphous Alloys with Tensile Plastic Elongation at Room Temperature
2002
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
Nanomoulding with amorphous metals
2009 StandoutNature
The conflicts between strength and toughness
2011 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Ductile Bulk Metallic Glass
2004
Fracture of Brittle Metallic Glasses: Brittleness or Plasticity
2005
Sustainable polymers from renewable resources
2016 StandoutNature
Magnesium and its alloys as orthopedic biomaterials: A review
2005 Standout
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Two-Dimensional Transition Metal Carbides
2012 Standout
Softening Caused by Profuse Shear Banding in a Bulk Metallic Glass
2006 Standout
Catalytic Biorefining of Plant Biomass to Non‐Pyrolytic Lignin Bio‐Oil and Carbohydrates through Hydrogen Transfer Reactions
2014
Poisson's ratio and modern materials
2011 Standout
Catalytic conversion of biomass pyrolysis-derived compounds with chemical liquid deposition (CLD) modified ZSM-5
2014
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
2011 Standout
A damage-tolerant glass
2011
Intercalation and delamination of layered carbides and carbonitrides
2013 Standout
Processing of Bulk Metallic Glass
2009 Standout
The true toughness of human cortical bone measured with realistically short cracks
2008
Entropy-stabilized oxides
2015 Standout
Designing metallic glass matrix composites with high toughness and tensile ductility
2008 StandoutNature
Bioinspired structural materials
2014 Standout
Pseudo-binary phase diagram for Zr-based in situ β phase composites
2007
Highly processable bulk metallic glass-forming alloys in the Pt–Co–Ni–Cu–P system
2004
A critical review of high entropy alloys and related concepts
2016 Standout
Newtonian flow of Zr55Cu30Al10Ni5 bulk metallic glassy alloys
2000
Porosity–Acidity Interplay in Hierarchical ZSM‐5 Zeolites for Pyrolysis Oil Valorization to Aromatics
2015
Viscous flow and microforming of a Zr-base bulk metallic glass
2008
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
UiO-66 metal organic frameworks with high contents of flexible adipic acid co-linkers
2022 StandoutNobel
Freeform fabrication of Ti3SiC2 powder-based structures
2002
Fatigue damage in bulk metallic glass I: Simulation
2005
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Bulk Glass-Forming Metallic Alloys: Science and Technology
1999 Standout
Ti3SiC2 has negligible thermopower
2000 Nature
Characterization of mechanical properties of a Zr-based metallic glass by indentation techniques
2004
2D metal carbides and nitrides (MXenes) for energy storage
2017 Standout
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
2015
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
2018 Standout
Investigation of thermal residual stresses in tungsten-fiber/bulk metallic glass matrix composites
2001
History dependent crystallization of Zr41Ti14Cu12Ni10Be23 melts
2000
Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering, Biorefining and Catalysis
2016 Standout
Comparison of fatigue behavior of a bulk metallic glass and its composite
2006
Reaction of Al with Ti3SiC2 in the 800–1000°C temperature range
2001
Equilibrium viscosity of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass-forming liquid and viscous flow during relaxation, phase separation, and primary crystallization
1998
Intrinsic plasticity or brittleness of metallic glasses
2005
Mg-based bulk metallic glass composites with plasticity and gigapascal strength
2005
Mechanisms of fatigue-crack propagation in ductile and brittle solids
1999
On the Fracture Toughness of Advanced Materials
2009
Mode II fracture behavior of a Zr-based bulk metallic glass
2006
Bulk metallic glasses for biomedical applications
2009
The MN+1AXN phases: A new class of solids
2000 Standout
Fracture toughness and notched toughness of bulk amorphous alloy: Zr-Ti-Ni-Cu-Be
1998
Influence of structural relaxation on the fatigue behavior of a ZrTiNiCuBe bulk amorphous alloy
2005
Effects of annealing and specimen geometry on dynamic compression of a Zr-based bulk metallic glass
2007
In situ fast pyrolysis of biomass with zeolite catalysts for bioaromatics/gasoline production: A review
2015
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
2018 Standout
Catalytic Biorefining of Plant Biomass to Non‐Pyrolytic Lignin Bio‐Oil and Carbohydrates through Hydrogen Transfer Reactions
2014
Temperature rise at shear bands in metallic glasses
2005
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
The fatigue behavior of a zirconium-based bulk metallic glass in vacuum and air
2003
Fracture and fatigue behavior of a Zr–Ti–Nb ductile phase reinforced bulk metallic glass matrix composite
2003
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
2015 Standout
Impact of Torrefaction on the Chemical Structure and Catalytic Fast Pyrolysis Behavior of Hemicellulose, Lignin, and Cellulose
2015
Ni-based bulk metallic glass formation in the Ni–Nb–Sn and Ni–Nb–Sn–X (X=B,Fe,Cu) alloy systems
2003
Toughness of Zr55Cu30Al10Ni5 bulk metallic glass for two oxygen levels
2006
Ultrathin Two-Dimensional Nanomaterials
2015 Standout
Synthesis of ethylene glycol and terephthalic acid from biomass for producing PET
2015
Enhanced toughness due to stable crack tip damage zones in bulk metallic glass
1999
Crystallization of beryllium–boron metallic glasses
2003
A review on ex situ catalytic fast pyrolysis of biomass
2014
Elastic and Mechanical Properties of the MAX Phases
2011
Stress-life fatigue behavior of a Zr-based bulk metallic glass
2005
Inhomogeneous deformation in metallic glasses
2002
Fatigue and fracture behavior of (Zr58Ni13.6Cu18Al10.4)99Nb1 bulk-amorphous alloy
2006
Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass
2002
Stabilization of metallic supercooled liquid and bulk amorphous alloys
2000 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Characterization of uniaxial compressive response of bulk amorphous Zr–Ti–Cu–Ni–Be alloy
2002
Oxidation behavior of Ti3AlC2 at 1000–1400 °C in air
2002
Molecular-dynamics study of ductile and brittle fracture in model noncrystalline solids
1999
Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite
2001
Strength-improved Zr-based metallic glass/porous tungsten phase composite by hydrostatic extrusion
2007
Deformation and Failure of Zr57Ti5Cu20Ni8Al10 Bulk Metallic Glass Under Quasi-static and Dynamic Compression
2002
The fatigue endurance limit of a Zr-based bulk metallic glass
2006
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
2009
Dynamic response of a Pd40Ni40P20 bulk metallic glass in tension
2002
Fatigue behavior of Zr52.5Al10Ti5Cu17.9Ni14.6 bulk metallic glass
2002
Catalytic fast pyrolysis of lignocellulosic biomass for aromatic production: chemistry, catalyst and process
2016
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Production of green aromatics and olefins by catalytic cracking of oxygenate compounds derived from biomass pyrolysis: A review
2013
Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics
2000
Catalytic fast pyrolysis of lignocellulosic biomass
2014
Characterization of free volume changes associated with shear band formation in Zr- and Cu-based bulk metallic glasses
2004
Fracture and deformation of bulk metallic glasses and their composites
2004
Approximate lattice thermal conductivity of MAX phases at high temperature
2015
Fatigue behavior of Zr–Ti–Ni–Cu–Be bulk-metallic glasses
2004
A survey of instrumented indentation studies on metallic glasses
2004
Embrittlement of Zr-based bulk metallic glasses
2009
Ceramics for Prosthetic Hip and Knee Joint Replacement
2007
Mechanical properties of tungsten fiber reinforced ZrAlNiCuSi metallic glass matrix composite
2002
Recent metallic materials for biomedical applications
2002
One-Pot Catalytic Conversion of Raw Lignocellulosic Biomass into Gasoline Alkanes and Chemicals over LiTaMoO6 and Ru/C in Aqueous Phosphoric Acid
2015
Quasi-static compressive property of metallic glass/porous tungsten bi-continuous phase composite
2006
Shape-selective zeolite catalysis for bioplastics production
2015 Science
Microstructure Controlled Shear Band Pattern Formation and Enhanced Plasticity of Bulk Metallic Glasses Containingin situFormed Ductile Phase Dendrite Dispersions
2000 Standout
Intrinsic and extrinsic toughening of metallic glasses
2005
Progress in research and development on MAX phases: a family of layered ternary compounds
2011
Negative strain rate sensitivity and compositional dependence of fracture strength in Zr/Hf based bulk metallic glasses
2003
Applications of 2D MXenes in energy conversion and storage systems
2018 Standout
The effect of silicon on the glass forming ability of the Cu47Ti34Zr11Ni8 bulk metallic glass forming alloy during processing of composites
1998
The superplastic forming of bulk metallic glasses
2005
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
2017 Standout
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
2017 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Production of Aromatic Hydrocarbons via Catalytic Pyrolysis of Biomass over Fe-Modified HZSM-5 Zeolites
2015
Effect of crystallinity on the impact toughness of a La-based bulk metallic glass
2000
Fracture toughness and crack-resistance curve behavior in metallic glass-matrix composites
2009
Localized heating and fracture criterion for bulk metallic glasses
2006
In situ crystallization and enhanced mechanical properties of the Zr41.2Ti13.8Cu12.5Ni10Be22.5 alloy by cold rolling
2005
Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites
1999
Are MXenes Promising Anode Materials for Li Ion Batteries? Computational Studies on Electronic Properties and Li Storage Capability of Ti3C2 and Ti3C2X2 (X = F, OH) Monolayer
2012 Standout
Compressive yielding of tungsten fiber reinforced bulk metallic glass composites
2003
Mechanical behavior of amorphous alloys
2007 Standout
Potential and challenges of zeolite chemistry in the catalytic conversion of biomass
2015
Development of shear band structure during deformation of a Zr57Ti5Cu20Ni8Al10 bulk metallic glass
2000
Fatigue crack closure: a review of the physical phenomena
2017
Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes
2004 Standout
SiC nanofibers by pyrolysis of electrospun preceramic polymers
2008
Microstructure and mechanical properties of a partially crystallized La-based bulk metallic glass
2003
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Solution to the problem of the poor cyclic fatigue resistance of bulk metallic glasses
2009
Structural bulk metallic glasses with different length-scale of constituent phases
2002
Local heating associated with crack tip plasticity in Zr–Ti–Ni–Cu–Be bulk amorphous metals
1999
Metal–Organic Frameworks for Heterogeneous Basic Catalysis
2017 Standout
Pressure-dependent flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass
2003
Tensile creep of fine grained (3–5 μm) Ti3SiC2 in the 1000–1200°C temperature range
2001
Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening
2013
Bulk metallic glass matrix composites
1997
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
2013 Standout
Works of Christopher J. Gilbert being referenced
Production of p‐Xylene from Biomass by Catalytic Fast Pyrolysis Using ZSM‐5 Catalysts with Reduced Pore Openings
2012
Fatigue-crack growth and fracture properties of coarse and fine-grained Ti3SiC2
2000
Stereophotogrammetric Investigation of Overload and Cyclic Fatigue Fracture Surface Morphologies in a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass
2000
Mechanics and mechanisms of fatigue damage and crack growth in advanced materials
2000
Light emission during fracture of a Zr–Ti–Ni–Cu–Be bulk metallic glass
1999
Fatigue of a Zr-Ti-Cu-Ni-Be bulk amorphous metal: Stress/life and crack-growth behavior
1998
Mechanisms for fracture and fatigue-crack propagation in a bulk metallic glass
1999
Fracture, fatigue and environmentally-assisted failure of a Zr-based bulk amorphous metal
2000
In Situ Toughened Silicon Carbide with Al‐B‐C Additions
1996
High-temperature cyclic fatigue-crack growth behavior in an in situ toughened silicon carbide
2000
Crack‐Growth Resistance‐Curve Behavior in Silicon Carbide: Small versus Long Cracks
1997
Cyclic fatigue and resistance-curve behavior of an in situ toughened silicon carbide with Al B C additions
1996
On the quantification of bridging tractions during subcritical crack growth under monotonic and cyclic fatigue loading in a grain-bridging silicon carbide ceramic11Work supported by the Director, Office of Energy Research, Office of Basic Energy Sciences, Materials Sciences Division of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098.
1998
Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass
1997
Production of p‐Xylene from Biomass by Catalytic Fast Pyrolysis Using ZSM‐5 Catalysts with Reduced Pore Openings
2012
MECHANISMS OF CYCLIC FATIGUE‐CRACK PROPAGATION IN A FINE‐GRAINED ALUMINA CERAMIC: THE ROLE OF CRACK CLOSURE
1997
Comparison of the Corrosion Behavior of a Bulk Amorphous Metal, Zr41.2Ti13.8Cu12.5Ni10Be22.5, with Its Crystallized Form
1998