Citation Impact
Citing Papers
Analysis of air compression, progress of compressor and control for optimal energy efficiency in proton exchange membrane fuel cell
2020
Detection and Estimation of Extremely Small Fault Signature by Utilizing Multiple Current Sensor Signals in Electric Machines
2017
Research on a 20-Slot/22-Pole Five-Phase Fault-Tolerant PMSM Used for Four-Wheel-Drive Electric Vehicles
2014
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
2010
Severity Estimation of Interturn Short Circuit Fault for PMSM
2018
Detection and Localization of Stator Resistance Dissymmetry Based on Multiple Reference Frame Controllers in Multiphase Induction Motor Drives
2012
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Improving System Efficiency for the More Electric Aircraft: A Look at dc\/dc Converters for the Avionic Onboard dc Microgrid
2017
Implementation Details and Safety Analysis of a Microcontroller-based SIL-4 Software Voter
2010
A review of sensorless control methods for AC motor drives
2018 Standout
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
2011 Standout
Health monitoring and prognosis of electric vehicle motor using intelligent‐digital twin
2019
A Generalized Fault-Tolerant Control Strategy for Five-Phase PM Motor Drives Considering Star, Pentagon, and Pentacle Connections of Stator Windings
2013
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
2015 Standout
Torque Control Strategy of Polyphase Permanent-Magnet Synchronous Machines With Minimal Controller Reconfiguration Under Open-Circuit Fault of One Phase
2011
Comprehensive Evaluation of Inter-Turn Short Circuit Faults in PMSM Used for Electric Vehicles
2020
Comparative Analysis and Optimization of Technical and Weight Parameters of Turbo-Electric Propulsion Systems
2020
State of the Art of Finite Control Set Model Predictive Control in Power Electronics
2012 Standout
Experimental Tests of Dual Three-Phase Induction Motor Under Faulty Operating Condition
2011
Multiphase Electric Machines for Variable-Speed Applications
2008 Standout
Real-time incipient fault detection for electrical traction systems of CRH2
2018
Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage
2018 Standout
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
2014 Standout
A comprehensive review of Flywheel Energy Storage System technology
2016
Challenges and Opportunities of Very Light High-Performance Electric Drives for Aviation
2018
High-speed functionality optimization of five-phase PM machine using third harmonic current
2014
Control of Multiphase Induction Motors With an Odd Number of Phases Under Open-Circuit Phase Faults
2011
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
2015 Standout
Shaft Positioning for Six-Phase Induction Machines With Open Phases Using Variable Structure Control
2011
Fault diagnosis of single-phase induction motor based on acoustic signals
2018 Standout
IGBT-Gating Failure Effect on a Fault-Tolerant Predictive Current-Controlled Five-Phase Induction Motor Drive
2014
Data-driven Detection and Diagnosis of Incipient Faults in Electrical Drives of High-Speed Trains
2018
A review on developments of polyphase machines
2020
Experimental Performance Evaluation of Smoothing Predictive Redundancy Using Embedded Microcontroller Unit
2010
Renewable energy and climate change
2022 Standout
A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time
2011
High-Frequency Electric Machines for Boundary Layer Ingestion Fan Propulsor
2019
Comparison of Embedded System Design for Industrial Applications
2011 Standout
Torque-Ripple Mitigation for Brushless DC Machine Drive System Using One-Cycle Average Torque Control
2014
Torque Ripple Reduction in Brushless DC Drives Based on Reference Current Optimization Using Integral Variable Structure Control
2013
High-Power Machines and Starter-Generator Topologies for More Electric Aircraft: A Technology Outlook
2020
Predictive Current Control of Dual Three-Phase Drives Using Restrained Search Techniques
2010
A Review of Fault Detection and Diagnosis for the Traction System in High-Speed Trains
2019 Standout
Genetic algorithm‐based output power optimisation of fault tolerant five‐phase brushless direct current drives applicable for electrical and hybrid electrical vehicles
2014
A Quadruple Active Bridge Converter for the Storage Integration on the More Electric Aircraft
2017
Multiphase Cage-Rotor Induction-Machine Drive With Direct Implementation of Brush DC Operation
2012
An Effective Federated Learning Verification Strategy and Its Applications for Fault Diagnosis in Industrial IoT Systems
2022 Standout
Reconfigurable Monitoring System for Time-Frequency Analysis on Industrial Equipment Through STFT and DWT
2012
A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches
2015 Standout
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
2016 Standout
An Overview of High-Conversion High-Voltage DC–DC Converters for Electrified Aviation Power Distribution System
2020
High-Speed Position-Sensorless Drive of Permanent-Magnet Machine Using Discrete-Time EMF Estimation
2017
Aircraft Hybrid-Electric Propulsion: Development Trends, Challenges and Opportunities
2021 Standout
Analysis and Design Techniques Applied to Hybrid Vehicle Drive Machines—Assessment of Alternative IPM and Induction Motor Topologies
2011
The Role of AI, Machine Learning, and Big Data in Digital Twinning: A Systematic Literature Review, Challenges, and Opportunities
2021 Standout
Speed Control of Five-Phase Induction Motors With Integrated Open-Phase Fault Operation Using Model-Based Predictive Current Control Techniques
2013
Electrical Machine Topologies: Hottest Topics in the Electrical Machine Research Community
2014
Advances in Diagnostic Techniques for Induction Machines
2008 Standout
Works of Chris Gerada being referenced
High-Speed Solid Rotor Permanent Magnet Machines: Concept and Design
2016
Winding turn-to-turn faults in permanent magnet synchronous machine drives
2005
Fault-Tolerant Brushless DC Motor Drive For Electro-Hydrostatic Actuation System In Aerospace Application
2006
Non‐linear circuit based model of permanent magnet synchronous machine under inter‐turn fault: a simple approach based on healthy machine data
2016
Development of Aircraft Electric Starter–Generator System Based on Active Rectification Technology
2018
An Integrated Method for Three-Phase AC Excitation and High-Frequency Voltage Signal Injection for Sensorless Starting of Aircraft Starter/Generator
2018
Design of a Five-Phase Brushless DC Motor for a Safety Critical Aerospace Application
2011
Challenges and Opportunities for Wound Field Synchronous Generators in Future More Electric Aircraft
2020
Design Considerations for a Fault-Tolerant Flux-Switching Permanent-Magnet Machine
2010
The implications of winding faults in induction motor drives
2004
Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications
2009
A Single Sided Matrix Converter Drive for a Brushless DC Motor in Aerospace Applications
2011
Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft
2018
Multidomain Optimization of High-Power-Density PM Electrical Machines for System Architecture Selection
2017
The results do mesh
2007
Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines
2018
State of the Art of Electric Taxiing Systems
2018
Multistress characterization of insulation aging mechanisms in aerospace electric actuators
2015
Power Loss and Thermal Analysis of a MW High-Speed Permanent Magnet Synchronous Machine
2017
Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines
2019
Induction-Machine-Based Starter/Generator Systems: Techniques, Developments, and Advances
2020
High-Speed Electric Drives: A Step Towards System Design
2020
A Low-Intrusion Load and Efficiency Evaluation Method for In-Service Motors Using Vibration Tests With an Accelerometer
2010
Development of a new fault-tolerant induction motor control strategy using an enhanced equivalent circuit model
2011
Performance Evaluation of a Vector Control Fault-Tolerant Flux-Switching Motor Drive
2012
Incipient Fault Diagnosis in Ultrareliable Electrical Machines
2017
On the Design of Partial Discharge-Free Low Voltage Electrical Machines
2019
Turn–turn short circuit fault management in permanent magnet machines
2015
Integrated PM Machine Design for an Aircraft EMA
2008
Permanent Magnet Starter-Generator for Aircraft Application
2014
Design and Initial Testing of a High-Speed 45-kW Switched Reluctance Drive for Aerospace Application
2016
Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System
2019
Thermal Overload and Insulation Aging of Short Duty Cycle, Aerospace Motors
2019
High-Speed Electrical Machines: Technologies, Trends, and Developments
2013 Standout
Fault-tolerant, matrix converter, permanent magnet synchronous motor drive for open-circuit failures
2011
Experimental Investigation on Oil Spray Cooling With Hairpin Windings
2019
Design Aspects of High-Speed High-Power-Density Laminated-Rotor Induction Machines
2010
A High-Speed Permanent-Magnet Machine for Fault-Tolerant Drivetrains
2013
Influence of rotor endcaps on the electromagnetic performance of high‐speed PM machine
2018
Load Control for the DC Electrical Power Distribution System of the More Electric Aircraft
2018
Thermal analysis of fault‐tolerant electrical machines for more electric aircraft applications
2018
Multistress Characterization of Fault Mechanisms in Aerospace Electric Actuators
2016
Rotor losses in fault-tolerant permanent magnet synchronous machines
2011