Standout Papers
Citation Impact
Citing Papers
Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells
2019 Standout
A fused-ring based electron acceptor for efficient non-fullerene polymer solar cells with small HOMO offset
2016
An All‐Small‐Molecule Organic Solar Cell with High Efficiency Nonfullerene Acceptor
2015
Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open‐Circuit Voltage
2017
Flexible, highly efficient all-polymer solar cells
2015
High efficiency all-polymer tandem solar cells
2016
Flow-enhanced solution printing of all-polymer solar cells
2015
A High Efficiency Nonfullerene Organic Solar Cell with Optimized Crystalline Organizations
2015
Competition between recombination and extraction of free charges determines the fill factor of organic solar cells
2015
Room Temperature Formation of Semiconductor Grade α-FAPbI3 Films for Efficient Perovskite Solar Cells
2020
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells
2015
Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%
2016
Achieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy
2016
High‐Performance Hole‐Extraction Layer of Sol–Gel‐Processed NiO Nanocrystals for Inverted Planar Perovskite Solar Cells
2014
Large-area display textiles integrated with functional systems
2021 StandoutNature
Efficient planar heterojunction perovskite solar cells by vapour deposition
2013 StandoutNature
A Rhodanine Flanked Nonfullerene Acceptor for Solution-Processed Organic Photovoltaics
2014
Controlled growth of perovskite layers with volatile alkylammonium chlorides
2023 StandoutNature
Efficient perovskite solar cells via improved carrier management
2021 StandoutNatureNobel
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
2013 StandoutNature
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
2021 StandoutNature
High-efficiency polymer solar cells with small photon energy loss
2015
Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells
2016
Liquid phase deposition of TiO2nanolayer affords CH3NH3PbI3/nanocarbon solar cells with high open-circuit voltage
2014
A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells
2014
Donor polymer design enables efficient non-fullerene organic solar cells
2016
Local Polar Fluctuations in Lead Halide Perovskite Crystals
2017 StandoutNobel
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
2019 StandoutNature
Synthesis and Modification of Silicon Nanosheets and Other Silicon Nanomaterials
2011
Reducing Surface Recombination by a Poly(4-vinylpyridine) Interlayer in Perovskite Solar Cells with High Open-Circuit Voltage and Efficiency
2018
Effects of solvent additive on “s-shaped” curves in solution-processed small molecule solar cells
2016
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor
2016
Stable and Low‐Cost Mesoscopic CH3NH3PbI2Br Perovskite Solar Cells by using a Thin Poly(3‐hexylthiophene) Layer as a Hole Transporter
2014
Compositional engineering of perovskite materials for high-performance solar cells
2015 StandoutNature
Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing
2017
Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells
2015
DNA-based self-assembly of chiral plasmonic nanostructures with tailored optical response
2012 StandoutNature
A Novel Thiophene-Fused Ending Group Enabling an Excellent Small Molecule Acceptor for High-Performance Fullerene-Free Polymer Solar Cells with 11.8% Efficiency
2017
Low Band Gap Polymer Solar Cells With Minimal Voltage Losses
2016
All‐Polymer Solar Cells Based on Absorption‐Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27%
2015
Templated Techniques for the Synthesis and Assembly of Plasmonic Nanostructures
2011
A Nonfullerene Small Molecule Acceptor with 3D Interlocking Geometry Enabling Efficient Organic Solar Cells
2015
Room‐Temperature Formation of Highly Crystalline Multication Perovskites for Efficient, Low‐Cost Solar Cells
2017
Ternary blend polymer solar cells with two non-fullerene acceptors as acceptor alloy
2017
Current status of electron transport layers in perovskite solar cells: materials and properties
2017
An All‐Solution Processed Recombination Layer with Mild Post‐Treatment Enabling Efficient Homo‐Tandem Non‐fullerene Organic Solar Cells
2016
Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency
2016
Designing Efficient Non‐Fullerene Acceptors by Tailoring Extended Fused‐Rings with Electron‐Deficient Groups
2015
Non-fullerene acceptors for organic solar cells
2018 Standout
Origin of Effects of Additive Solvent on Film-Morphology in Solution-Processed Nonfullerene Solar Cells
2015
Importance of Electron Transport Ability in Naphthalene Diimide-Based Polymer Acceptors for High-Performance, Additive-Free, All-Polymer Solar Cells
2015
High Efficiency Ternary Nonfullerene Polymer Solar Cells with Two Polymer Donors and an Organic Semiconductor Acceptor
2017
A scalable electrodeposition route to the low-cost, versatile and controllable fabrication of perovskite solar cells
2015
Recent Advances in Improving the Stability of Perovskite Solar Cells
2015
Low-temperature-processed ZnO–SnO2 nanocomposite for efficient planar perovskite solar cells
2015
Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems
2015
Recent Progress on Formamidinium‐Dominated Perovskite Photovoltaics
2021
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
2016
Recent research progress of polymer donor/polymer acceptor blend solar cells
2016
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
Anomalous Alloy Properties in Mixed Halide Perovskites
2014
High-performance fullerene-free polymer solar cells with 6.31% efficiency
2014
High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area
2017
High Performance Organic Solar Cells Based on a Twisted Bay‐Substituted Tetraphenyl Functionalized Perylenediimide Electron Acceptor
2015
Design of Donor Polymers with Strong Temperature-Dependent Aggregation Property for Efficient Organic Photovoltaics
2017
A Vinylene‐Bridged Perylenediimide‐Based Polymeric Acceptor Enabling Efficient All‐Polymer Solar Cells Processed under Ambient Conditions
2016
Rhodanine flanked indacenodithiophene as non-fullerene acceptor for efficient polymer solar cells
2017
High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor
2017
A New Nonfullerene Electron Acceptor with a Ladder Type Backbone for High‐Performance Organic Solar Cells
2016
Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit
2015
Versatile ternary organic solar cells: a critical review
2015
Highly efficient exciton harvesting and charge transport in ternary blend solar cells based on wide- and low-bandgap polymers
2015
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High‐Performance Nonfullerene Polymer Solar Cells
2015
High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration
2017
Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells Using Highly Crystalline SnO2 Nanocrystals as the Robust Electron‐Transporting Layer
2016
Ring-fusion as a perylenediimide dimer design concept for high-performance non-fullerene organic photovoltaic acceptors
2016
High‐Performance Non‐Fullerene Polymer Solar Cells Based on a Pair of Donor–Acceptor Materials with Complementary Absorption Properties
2015
New M- and V-shaped perylene diimide small molecules for high-performance nonfullerene polymer solar cells
2016
Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9%
2017
Fused Hexacyclic Nonfullerene Acceptor with Strong Near‐Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency
2017
A non-fullerene acceptor with a fully fused backbone for efficient polymer solar cells with a high open-circuit voltage
2016
Side‐Chain Engineering for Enhancing the Properties of Small Molecule Solar Cells: A Trade‐off Beyond Efficiency
2016
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
2019 Standout
First-Principles Investigation of the TiO2/Organohalide Perovskites Interface: The Role of Interfacial Chlorine
2014
Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%
2015
Naphtho[1,2‐c:5,6‐c′]bis[1,2,5]thiadiazole‐Containing π‐Conjugated Compound: Nonfullerene Electron Acceptor for Organic Photovoltaics
2016
Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency
2017
Charge Generation Pathways in Organic Solar Cells: Assessing the Contribution from the Electron Acceptor
2016
Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High‐Performance PffBT4T‐2OD:PC71BM Organic Solar Cells
2015
Efficient Organic Solar Cells with Non‐Fullerene Acceptors
2017
Thermally stable high performance non-fullerene polymer solar cells with low energy loss by using ladder-type small molecule acceptors
2017
Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%
2015
Interface engineering for high-performance perovskite hybrid solar cells
2015
Perylenediimides as non-fullerene acceptors in bulk-heterojunction solar cells (BHJSCs)
2016
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
2014 StandoutScience
New advances in non-fullerene acceptor based organic solar cells
2015
All-small-molecule organic solar cells based on an electron donor incorporating binary electron-deficient units
2016
Organic–inorganic halide perovskite based solar cells – revolutionary progress in photovoltaics
2015
Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors
2016
Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages
2016
Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint
2017
Oligomer Molecules for Efficient Organic Photovoltaics
2015
Enhanced Moisture Stability of Perovskite Solar Cells With Mixed‐Dimensional and Mixed‐Compositional Light‐Absorbing Materials
2017
Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells
2016
High‐Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor
2016
Rutile TiO2-based perovskite solar cells
2014
Perylene Diimide Trimers Based Bulk Heterojunction Organic Solar Cells with Efficiency over 7%
2016
Highly Efficient Parallel-Like Ternary Organic Solar Cells
2017
Non-Fullerene Electron Acceptors for Use in Organic Solar Cells
2015
Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
2015
Understanding Energy Loss in Organic Solar Cells: Toward a New Efficiency Regime
2017
Conformation Locking on Fused‐Ring Electron Acceptor for High‐Performance Nonfullerene Organic Solar Cells
2018
Propeller-Shaped Acceptors for High-Performance Non-Fullerene Solar Cells: Importance of the Rigidity of Molecular Geometry
2017
Pronounced Effects of a Triazine Core on Photovoltaic Performance–Efficient Organic Solar Cells Enabled by a PDI Trimer‐Based Small Molecular Acceptor
2016
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
2015 StandoutScience
Fast charge separation in a non-fullerene organic solar cell with a small driving force
2016
Trends in the electronic and geometric structure of non-fullerene based acceptors for organic solar cells
2017
Ternary Organic Solar Cells Based on Two Highly Efficient Polymer Donors with Enhanced Power Conversion Efficiency
2015
High Efficiency Near-Infrared and Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells
2017
Geometrically controlled organic small molecule acceptors for efficient fullerene-free organic photovoltaic devices
2016
Reversible Halide Exchange Reaction of Organometal Trihalide Perovskite Colloidal Nanocrystals for Full-Range Band Gap Tuning
2015
Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor
2015
Side Chain Optimization of Naphthalenediimide–Bithiophene‐Based Polymers to Enhance the Electron Mobility and the Performance in All‐Polymer Solar Cells
2016
Thieno[3,2-b]pyrrolo-Fused Pentacyclic Benzotriazole-Based Acceptor for Efficient Organic Photovoltaics
2017
Polymer Acceptor Based on Double B←N Bridged Bipyridine (BNBP) Unit for High‐Efficiency All‐Polymer Solar Cells
2016
Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%
2015
Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells
2015
Three-Bladed Rylene Propellers with Three-Dimensional Network Assembly for Organic Electronics
2016
High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing
2016
Terthiophene-Based D–A Polymer with an Asymmetric Arrangement of Alkyl Chains That Enables Efficient Polymer Solar Cells
2015
MAPbI3-xClx Mixed Halide Perovskite for Hybrid Solar Cells: The Role of Chloride as Dopant on the Transport and Structural Properties
2013
Achieving a high fill factor for organic solar cells
2016
Covalently Bound Clusters of Alpha-Substituted PDI—Rival Electron Acceptors to Fullerene for Organic Solar Cells
2016
Nonfullerene Polymer Solar Cells with 8.5% Efficiency Enabled by a New Highly Twisted Electron Acceptor Dimer
2015
Simultaneous enhancement of the molecular planarity and the solubility of non-fullerene acceptors: effect of aliphatic side-chain substitution on the photovoltaic performance
2017
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
2017
Panchromatic Sequentially Cast Ternary Polymer Solar Cells
2016
Ternary Nonfullerene Polymer Solar Cells with 12.16% Efficiency by Introducing One Acceptor with Cascading Energy Level and Complementary Absorption
2017
New Insights into the Correlation between Morphology, Excited State Dynamics, and Device Performance of Small Molecule Organic Solar Cells
2016
Small‐Molecule Solar Cells with Simultaneously Enhanced Short‐Circuit Current and Fill Factor to Achieve 11% Efficiency
2017
Organic and Polymeric Semiconductors Enhanced by Noncovalent Conformational Locks
2017
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
2019 Standout
Research progress of perovskite materials in photocatalysis- and photovoltaics-related energy conversion and environmental treatment
2015
Importance of Spin–Orbit Coupling in Hybrid Organic/Inorganic Perovskites for Photovoltaic Applications
2013
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
2015
Additive Enhanced Crystallization of Solution‐Processed Perovskite for Highly Efficient Planar‐Heterojunction Solar Cells
2014
Perowskit‐Solarzellen: atomare Ebene, Schichtqualität und Leistungsfähigkeit der Zellen
2017
Graphene-Like Two-Dimensional Materials
2013 Standout
Low-Bandgap Small Molecules as Non-Fullerene Electron Acceptors Composed of Benzothiadiazole and Diketopyrrolopyrrole for All Organic Solar Cells
2015
A spirobifluorene and diketopyrrolopyrrole moieties based non-fullerene acceptor for efficient and thermally stable polymer solar cells with high open-circuit voltage
2015
Efficient non-fullerene polymer solar cells enabled by tetrahedron-shaped core based 3D-structure small-molecular electron acceptors
2015
Simply Complex: The Efficient Synthesis of an Intricate Molecular Acceptor for High-Performance Air-Processed and Air-Tested Fullerene-Free Organic Solar Cells
2017
A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency
2016
Identifying the Molecular Structures of Intermediates for Optimizing the Fabrication of High-Quality Perovskite Films
2016
Improved Performance of Ternary Polymer Solar Cells Based on A Nonfullerene Electron Cascade Acceptor
2016
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
2013 Standout
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
2016 StandoutScience
Structure Evolution of Oligomer Fused‐Ring Electron Acceptors toward High Efficiency of As‐Cast Polymer Solar Cells
2016
n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells
2016
Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar Cells
2015
9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor
2017
Interfaces in Perovskite Solar Cells
2017
High‐Performance Graphene‐Based Hole Conductor‐Free Perovskite Solar Cells: Schottky Junction Enhanced Hole Extraction and Electron Blocking
2015
Significance of Average Domain Purity and Mixed Domains on the Photovoltaic Performance of High‐Efficiency Solution‐Processed Small‐Molecule BHJ Solar Cells
2015
Achievement of High Voc of 1.02 V for P3HT‐Based Organic Solar Cell Using a Benzotriazole‐Containing Non‐Fullerene Acceptor
2016
An Electron Acceptor with Porphyrin and Perylene Bisimides for Efficient Non‐Fullerene Solar Cells
2017
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
2016 StandoutNature
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
2016
Designing ternary blend bulk heterojunction solar cells with reduced carrier recombination and a fill factor of 77%
2016
Sulfate‐Assisted Interfacial Engineering for High Yield and Efficiency of Triple Cation Perovskite Solar Cells with Alkali‐Doped TiO2 Electron‐Transporting Layers
2018
Non-fullerene small molecule acceptors based on perylene diimides
2016
Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
2017
Oligothiophene-bridged perylene diimide dimers for fullerene-free polymer solar cells: effect of bridge length
2015
Microstructural and Electronic Origins of Open‐Circuit Voltage Tuning in Organic Solar Cells Based on Ternary Blends
2015
Gold Nanoparticles in Chemical and Biological Sensing
2012 Standout
Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells
2016
Plasmons in Strongly Coupled Metallic Nanostructures
2011 Standout
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
2015 StandoutScience
Perovskite-based solar cells: impact of morphology and device architecture on device performance
2014
Ring-Fusion of Perylene Diimide Acceptor Enabling Efficient Nonfullerene Organic Solar Cells with a Small Voltage Loss
2017
Status and prospects for ternary organic photovoltaics
2015
Small molecule carbazole-based diketopyrrolopyrroles with tetracyanobutadiene acceptor unit as a non-fullerene acceptor for bulk heterojunction organic solar cells
2017
Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells
2015
Improved Performance of All‐Polymer Solar Cells Enabled by Naphthodiperylenetetraimide‐Based Polymer Acceptor
2017
First-Principles Modeling of Mixed Halide Organometal Perovskites for Photovoltaic Applications
2013
Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor
2018
A Tetraperylene Diimides Based 3D Nonfullerene Acceptor for Efficient Organic Photovoltaics
2015
Interface engineering of highly efficient perovskite solar cells
2014 StandoutScience
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Promises and challenges of perovskite solar cells
2017 StandoutScience
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
2019 Science
Solution-processed boron subphthalocyanine derivatives as acceptors for organic bulk-heterojunction solar cells
2015
Enhancing Performance of Nonfullerene Acceptors via Side‐Chain Conjugation Strategy
2017
Mechanical Stabilization of Helical Chirality in a Macrocyclic Oligothiophene
2019 StandoutNobel
Unveiling a Key Intermediate in Solvent Vapor Postannealing to Enlarge Crystalline Domains of Organometal Halide Perovskite Films
2017
Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells
2015
A facile deposition of large grain and phase pure α-FAPbI3 for perovskite solar cells via a flash crystallization
2017
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
2013 StandoutScience
Beyond PCBM: methoxylated 1,4-bisbenzyl[60]fullerene adducts for efficient organic solar cells
2015
High‐Performance Polymer Tandem Solar Cells Employing a New n‐Type Conjugated Polymer as an Interconnecting Layer
2016
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
2017
Non-planar perylenediimide acceptors with different geometrical linker units for efficient non-fullerene organic solar cells
2016
Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells
2017
Efficient Nonfullerene Polymer Solar Cells Enabled by a Novel Wide Bandgap Small Molecular Acceptor
2017
n-Type Semiconducting Naphthalene Diimide-Perylene Diimide Copolymers: Controlling Crystallinity, Blend Morphology, and Compatibility Toward High-Performance All-Polymer Solar Cells
2015
Reducing Voltage Losses in Cascade Organic Solar Cells while Maintaining High External Quantum Efficiencies
2017
Highly efficient and thermally stable fullerene-free organic solar cells based on a small molecule donor and acceptor
2016
NH2CH═NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells
2014
The merit of perovskite's dimensionality; can this replace the 3D halide perovskite?
2017
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics
2016 Nobel
Extracting Information about the Electronic Quality of Organic Solar-Cell Absorbers from Fill Factor and Thickness
2016
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
2013 StandoutScience
A simple perylene diimide derivative with a highly twisted geometry as an electron acceptor for efficient organic solar cells
2016
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
Organohalide lead perovskites for photovoltaic applications
2014
Ternary Polymer–Perylenediimide–Carbon Nanotube Photovoltaics with High Efficiency and Stability under Super-Solar Irradiation
2016
π-Bridge-Independent 2-(Benzo[c][1,2,5]thiadiazol-4-ylmethylene)malononitrile-Substituted Nonfullerene Acceptors for Efficient Bulk Heterojunction Solar Cells
2016
Comparison of the Optical and Electrochemical Properties of Bi(perylene diimide)s Linked through Ortho and Bay Positions
2017
HC(NH2)2PbI3as a thermally stable absorber for efficient ZnO-based perovskite solar cells
2016
NDI‐Based Small Molecule as Promising Nonfullerene Acceptor for Solution‐Processed Organic Photovoltaics
2015
Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)
2017
Scalable fabrication of perovskite solar cells
2018
Perovskite‐Based Hybrid Solar Cells Exceeding 10% Efficiency with High Reproducibility Using a Thin Film Sandwich Approach
2013
Nonfullerene Small Molecular Acceptors with a Three-Dimensional (3D) Structure for Organic Solar Cells
2016
Synthesis, Self-Assembly, and Solar Cell Performance of N-Annulated Perylene Diimide Non-Fullerene Acceptors
2016
Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method
2017
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
2016 StandoutScience
Design, synthesis, and structural characterization of the first dithienocyclopentacarbazole-based n-type organic semiconductor and its application in non-fullerene polymer solar cells
2017
Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
2017
An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells
2014
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
2016 StandoutScience
Hidden Structure Ordering Along Backbone of Fused‐Ring Electron Acceptors Enhanced by Ternary Bulk Heterojunction
2018
Stretchable and waterproof elastomer-coated organic photovoltaics for washable electronic textile applications
2017
Electron acceptors with varied linkages between perylene diimide and benzotrithiophene for efficient fullerene-free solar cells
2017
Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%
2016
Reduced graphene oxide (rGO) grafted zinc stannate (Zn2SnO4) nanofiber scaffolds for highly efficient mixed-halide perovskite solar cells
2016
Spiro Linkage as an Alternative Strategy for Promising Nonfullerene Acceptors in Organic Solar Cells
2015
Next-generation organic photovoltaics based on non-fullerene acceptors
2018 Standout
Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%
2018
Versatile third components for efficient and stable organic solar cells
2015
Design and Synthesis of a Low Bandgap Small Molecule Acceptor for Efficient Polymer Solar Cells
2016
Electron Acceptors Based on α-Substituted Perylene Diimide (PDI) for Organic Solar Cells
2016
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
A Wide Bandgap Polymer with Strong π–π Interaction for Efficient Fullerene‐Free Polymer Solar Cells
2016
Fine‐Tuning the 3D Structure of Nonfullerene Electron Acceptors Toward High‐Performance Polymer Solar Cells
2015
Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
2020 Standout
Fullerene-free small molecule organic solar cells with a high open circuit voltage of 1.15 V
2015
Wide Band Gap and Highly Conjugated Copolymers Incorporating 2-(Triisopropylsilylethynyl)thiophene-Substituted Benzodithiophene for Efficient Non-Fullerene Organic Solar Cells
2017
Influence of Donor Polymer on the Molecular Ordering of Small Molecular Acceptors in Nonfullerene Polymer Solar Cells
2017
Functionalized graphene and other two-dimensional materials for photovoltaic devices: device design and processing
2015
A Wide-Bandgap Donor Polymer for Highly Efficient Non-fullerene Organic Solar Cells with a Small Voltage Loss
2017
Electron-Accepting π-Conjugated Systems for Organic Photovoltaics: Influence of Structural Modification on Molecular Orientation at Donor–Acceptor Interfaces
2016
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
2015 StandoutScience
Low Open-Circuit Voltage Loss in Solution-Processed Small-Molecule Organic Solar Cells
2016
Fluoro‐Substituted n‐Type Conjugated Polymers for Additive‐Free All‐Polymer Bulk Heterojunction Solar Cells with High Power Conversion Efficiency of 6.71%
2015
Ladder-Type Dithienonaphthalene-Based Small-Molecule Acceptors for Efficient Nonfullerene Organic Solar Cells
2017
Efficient fullerene-free organic solar cells based on fused-ring oligomer molecules
2015
Challenges for commercializing perovskite solar cells
2018 StandoutScience
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
2015
CH3NH3Cl-Assisted One-Step Solution Growth of CH3NH3PbI3: Structure, Charge-Carrier Dynamics, and Photovoltaic Properties of Perovskite Solar Cells
2014
Organohalide Lead Perovskites for Photovoltaic Applications
2016
Ternary organic solar cells with enhanced open circuit voltage
2017
Understanding the relationship between ion migration and the anomalous hysteresis in high-efficiency perovskite solar cells: A fresh perspective from halide substitution
2016
Light Management in Organic Photovoltaics Processed in Ambient Conditions Using ZnO Nanowire and Antireflection Layer with Nanocone Array
2019 StandoutNobel
A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells
2014
Efficient organic solar cells processed from hydrocarbon solvents
2016 Standout
Nonfullerene Tandem Organic Solar Cells with High Open‐Circuit Voltage of 1.97 V
2016
Intrinsic non-radiative voltage losses in fullerene-based organic solar cells
2017
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
2015 StandoutScience
Reduced Intramolecular Twisting Improves the Performance of 3D Molecular Acceptors in Non‐Fullerene Organic Solar Cells
2016
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
Single-junction polymer solar cells with high efficiency and photovoltage
2015 Standout
New developments in non-fullerene small molecule acceptors for polymer solar cells
2017
Low‐Temperature Fabrication of Efficient Wide‐Bandgap Organolead Trihalide Perovskite Solar Cells
2014
The structural evolution of an isoindigo-based non-fullerene acceptor for use in organic photovoltaics
2015
A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells
2015
Homo‐Tandem Polymer Solar Cells with VOC >1.8 V for Efficient PV‐Driven Water Splitting
2016
Enhanced Efficiency in Fullerene-Free Polymer Solar Cell by Incorporating Fine-designed Donor and Acceptor Materials
2015
Rigidifying Nonplanar Perylene Diimides by Ring Fusion Toward Geometry‐Tunable Acceptors for High‐Performance Fullerene‐Free Solar Cells
2015
Recent advances in rylene diimide polymer acceptors for all-polymer solar cells
2015
Bifunctional alkyl chain barriers for efficient perovskite solar cells
2015
Polymer Main‐Chain Substitution Effects on the Efficiency of Nonfullerene BHJ Solar Cells
2017
Formamidinium-Containing Metal-Halide: An Alternative Material for Near-IR Absorption Perovskite Solar Cells
2013
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
2017 StandoutScience
High‐Performance All‐Polymer Solar Cells Via Side‐Chain Engineering of the Polymer Acceptor: The Importance of the Polymer Packing Structure and the Nanoscale Blend Morphology
2015
Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution
2015
Smart Textiles for Electricity Generation
2020
More than Conformational “Twisting” or “Coplanarity”: Molecular Strategies for Designing High-Efficiency Nonfullerene Organic Solar Cells
2016
Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%
2016
Interfaces in Perovskite Solar Cells
2015
Study on the stability of CH3NH3PbI3films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells
2013
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
2014
A planar electron acceptor for efficient polymer solar cells
2015
Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54%
2018
Efficient Charge Transfer and Fine‐Tuned Energy Level Alignment in a THF‐Processed Fullerene‐Free Organic Solar Cell with 11.3% Efficiency
2016
Efficient Planar Perovskite Solar Cells Based on 1.8 eV Band Gap CH3NH3PbI2Br Nanosheets via Thermal Decomposition
2014
High-Performance Solution-Processed Non-Fullerene Organic Solar Cells Based on Selenophene-Containing Perylene Bisimide Acceptor
2015 Nobel
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
2015 StandoutScience
An Easily Accessible Cathode Buffer Layer for Achieving Multiple High Performance Polymer Photovoltaic Cells
2015
Poly(4‐Vinylpyridine)‐Based Interfacial Passivation to Enhance Voltage and Moisture Stability of Lead Halide Perovskite Solar Cells
2017
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
2014 StandoutScience
Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering
2017
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
2016 Standout
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
2017 StandoutScience
Impact of microstructure on local carrier lifetime in perovskite solar cells
2015 StandoutScience
Enhanced Organic Solar Cell Stability by Polymer (PCPDTBT) Side Chain Functionalization
2015
New Wide Band Gap Donor for Efficient Fullerene-Free All-Small-Molecule Organic Solar Cells
2017
Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%
2017
Bis(Naphthalene Imide)diphenylanthrazolines: A New Class of Electron Acceptors for Efficient Nonfullerene Organic Solar Cells and Applicable to Multiple Donor Polymers
2015
Hydrophobic Hole-Transporting Materials Incorporating Multiple Thiophene Cores with Long Alkyl Chains for Efficient Perovskite Solar Cells
2016 StandoutNobel
Diluting concentrated solution: a general, simple and effective approach to enhance efficiency of polymer solar cells
2015
Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
2015 Nobel
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
2015
Impact of Interfacial Layers in Perovskite Solar Cells
2017
Interface design for high-efficiency non-fullerene polymer solar cells
2017
Works of Cheng Mu being referenced
Au nanoparticle arrays with tunable particle gaps by template-assisted electroless deposition for high performance surface-enhanced Raman scattering
2009
All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one-dimensional TiO2 nanowire arrays
2013
Efficiency Enhancement of Perovskite Solar Cells through Fast Electron Extraction: The Role of Graphene Quantum Dots
2014
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
2014 Standout
Uniform Metal Nanotube Arrays by Multistep Template Replication and Electrodeposition
2004
Quantitative Doping of Chlorine in Formamidinium Lead Trihalide (FAPbI3−xClx) for Planar Heterojunction Perovskite Solar Cells
2016
High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor
2014
Highly Efficient Inverted Polymer Solar Cells Based on a Cross-linkable Water-/Alcohol-Soluble Conjugated Polymer Interlayer
2014
Organic Solar Cells: A Tetraphenylethylene Core‐Based 3D Structure Small Molecular Acceptor Enabling Efficient Non‐Fullerene Organic Solar Cells (Adv. Mater. 6/2015)
2015
Polyfluorene Derivatives are High‐Performance Organic Hole‐Transporting Materials for Inorganic−Organic Hybrid Perovskite Solar Cells
2014
The influence of spacer units on molecular properties and solar cell performance of non-fullerene acceptors
2015
A Tetraphenylethylene Core‐Based 3D Structure Small Molecular Acceptor Enabling Efficient Non‐Fullerene Organic Solar Cells
2014
High‐Efficiency All‐Polymer Solar Cells Based on a Pair of Crystalline Low‐Bandgap Polymers
2014
Silicon Nanotube Array/Gold Electrode for Direct Electrochemistry of Cytochrome c
2007
Room‐Temperature, Hydrochloride‐Assisted, One‐Step Deposition for Highly Efficient and Air‐Stable Perovskite Solar Cells
2016