Changping Chen

Alkali activation as new option for gold mine tailings inertization

Preparation of porous glass-ceramics from coal fly ash and asbestos tailings by high-temperature pore-forming

A review of recent strategies for acid mine drainage prevention and mine tailings recycling

Alkali-activated materials

Hydrogen production, storage, transportation and key challenges with applications: A review

Metal hydride beds and hydrogen supply tanks as minitype PEMFC hydrogen sources

Hydrogen storage properties of nanocrystalline Mg1.9Ti0.1Ni made by mechanical alloying

Metal hydride materials for solid hydrogen storage: A review☆

Sustainable ceramics derived from solid wastes: a review

A review on the current progress of metal hydrides material for solid-state hydrogen storage applications

Advances in understanding alkali-activated materials

Mn oxide coated catalytic membranes for hybrid ozonation-membrane filtration: Membrane microstructural characterization

Studies on rechargeable NiMH batteries

Hydrogen storage in Mg: A most promising material

Generation of sulfate radical through heterogeneous catalysis for organic contaminants removal: Current development, challenges and prospects

A study of the surface composition and structure of fluorinated Mg-based alloys

Complex Hydrides for Hydrogen Storage

Hydrogen absorption in nanocrystalline Mg2Ni formed by mechanical alloying

A review on preparation, characterization, properties and applications of nanofluids

Catalytic effect of Pd on hydrogen absorption in mechanically alloyed Mg2Ni, LaNi5 and FeTi

Catalytic effects of metal oxide on hydrogen absorption of magnesium metal hydride

The composition, recycling and utilisation of Bayer red mud

The structural and electrochemical properties of La0.7Mg0.3(Ni0.85Co0.15)x (x=3.0–5.0) hydrogen storage alloys

Recycling food, agricultural, and industrial wastes as pore-forming agents for sustainable porous ceramic production: A review

Thermal analysis investigation of hydriding properties of nanocrystalline Mg–Ni- and Mg–Fe-based alloys prepared by high-energy ball milling

Novel glass ceramic foams materials based on red mud

Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent

Surface characteristics of fluorinated hydriding alloys

Hydriding/dehydriding behaviors of La1.8Ca0.2Mg14Ni3 alloy modified by mechanical ball-milling under argon

Nanocrystalline magnesium for hydrogen storage

Hydride formation in MgZrFe1.4Cr0.6 composite material

Three Decades of Intermetallic Hydrides — What happened to the Applications?*

Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing

Overview of current development in electrical energy storage technologies and the application potential in power system operation

Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes

Geopolymers and Related Alkali-Activated Materials

An investigation of the mechanical behaviour of hydrogen storage metal beds on hydriding and dehydriding and several methods of preventing the damage of hydride containers caused by the expansion of hydrogen storage metals

Characterization of Al2O3–Al nano-composite powder prepared by a wet chemical method

The effects of etching with HCl on the hydrogen sorption properties of Mg2Ni

AgNO3-based colorimetric methods for measurement of chloride penetration in concrete

Preparation of double-layer glass-ceramic/ceramic tile from bauxite tailings and red mud

Influence of heat-treatment schedule on crystallization and microstructure of bauxite tailing glass–ceramics coated on tiles

Electrochemical properties of La0.9Sm0.1Ni(5.0−x)Cox (x=2.0, 2.5, 3.0) hydride electrode alloys

Hydriding behavior of magnesium-based hydrogen storage alloy modified by mechanical ball-milling