Citation Impact
Citing Papers
Grain growth inhibition of hardmetals during initial heat-up
2017
Recent advances in catalytic hydrogenation of carbon dioxide
2011 Standout
Antiplasticization and the elastic properties of glass-forming polymer liquids
2009
Dental implant materials. I. Some effects of preparative procedures on surface topography
1991
Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs
1991 Standout
Microstructural evolution and resulting properties of differently sintered and heat-treated binder-jet 3D-printed Stellite 6
2019
Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient
2010 Standout
The structure of suspended graphene sheets
2007 StandoutNatureNobel
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Porous‐surfaced metallic implants for orthopedic applications
1987
Rearrangement and pore size evolution during WC–Co sintering below the eutectic temperature
2005
Segregation to interphase boundaries in liquid-phase sintered tungsten alloys
1983
A critical review of high entropy alloys and related concepts
2016 Standout
SGTE data for pure elements
1991 Standout
Coarsening in Sintering: Grain Shape Distribution, Grain Size Distribution, and Grain Growth Kinetics in Solid-Pore Systems
2010
Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting
2010
Simulations of Composite Electrodes in Fuel Cells
2000
Review: liquid phase sintering
2008 Standout
Direct formation of quantum-sized dots from uniform coherent islands of InGaAs on GaAs surfaces
1993 Standout
Evolution of magnetic domain structures and coercivity in high-performance SmCo 2:17-type permanent magnets
2005
Kinetics of the formation of metal binder gradient in WC–Co by carbon diffusion induced liquid migration
2011
Clustering on surfaces
1992
Cemented carbide microstructures: a review
2018 Standout
The contiguity of carbide crystals of different shapes in cemented carbides
2005
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
2004 Standout
Modeling grain growth dependence on the liquid content in liquid-phase-sintered materials
1998
Coupled phase diagrams and thermochemical data for transition metal binary systems — I
1978
Trends in the P/M hard metal industry
2014
New Generation Adsorbents for Water Treatment
2012 Standout
A computational study of thin cubic carbide films in WC/Co interfaces
2010
Review of selective laser melting: Materials and applications
2015 Standout
Microstructures and coercivities of SmCo and Sm(Co,Cu)5 films prepared by magnetron sputtering
2006
1991 Standout
Metal hydride materials for solid hydrogen storage: A review☆
2007 Standout
The temperature ranges for maximum effectiveness of grain growth inhibitors in WC–Co alloys
2005
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Crossflow membrane filtration of interacting nanoparticle suspensions
2006
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
2010 Standout
Electric-field strength, polarization dipole, and multi-interface band offset in piezoelectricGa 1 − x In x N / G a N
2000 StandoutNobel
Fundamentals of sintering nanoscaled binderless hardmetals
2014
Nanomagnetics
2003
Pressure dependence of the superconducting transition temperature of the filled skutterudite YFe4 12
2013 StandoutNobel
Growth mechanism of round-edged NbC grains in Co liquid
2001
HRTEM investigation of dislocation interactions in WC
2013
Raney metal catalysts: I. comparative properties of raney nickel proceeding from Ni-Ai intermetallic phases
1984
Controlling the properties of high energy density permanent magnetic materials by different processing routes
2000
Kinetics of densification and grain growth in ultrafine WC-Co composites
2016
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Densification behavior of tungsten heavy alloy based on master sintering curve concept
2006
Band parameters for III–V compound semiconductors and their alloys
2001 Standout
Piezoelectric Franz–Keldysh effect in strained GaInN/GaN heterostructures
1999 StandoutNobel
Microstructure and wear resistance of WC–Co by three consolidation processing techniques
2008
High temperature 2:17 magnets: relationship of magnetic properties to microstructure and processing
2000
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
3D‐Printing of Lightweight Cellular Composites
2014 Standout
Optical properties of GaSb/Ga0.69Al0.31Sb single quantum wells grown by molecular beam epitaxy
1990
WC platelet formation via high-energy ball mill
2014
Some aspects of the structure of cobalt and nickel binder phases in hardmetals
2011
Numerical simulation of grain growth in liquid phase sintered materials-I. Model
1998
Sintering of WC-12%Co processed by binder jet 3D printing (BJ3DP) technology
2017
Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method
2019
Effects of tungsten particle size and copper content on densification of liquid-phase-sintered W-Cu
2005
The thermodynamic properties of rare earth metallic systems
1995
Structural Analysis on Planar Defects Formed in WC Platelets in Ti‐Doped WC–Co
2006
Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys
2010
Texture modification, grain refinement and improved hardness/corrosion balance of a FeAl alloy by pulsed electron beam surface treatment in the “heating mode”
2008 Standout
Modulation spectroscopy of semiconductors: bulk/thin film, microstructures, surfaces/interfaces and devices
1993
Interband transitions from the photoreflectance of GaSb/AlSb multiple quantum wells
1989 Nobel
Additive manufacturing of WC-20Co components by 3D gel-printing
2017
Cemented carbides based on WC pre-alloyed with Cr or Ta
2014
Surface modification and alloying of metallic materials with low-energy high-current electron beams
2004
Comparison between microwave and conventional sintering of WC/Co composites
2004
Structure and role of the interfacial layers in VC-rich WC-Co cermets
2003
Optimisation of MmNi5-xSnxMmNi5-xSnx (Mm=LaMm=La, Ce, Nd and Pr, 0.27<x<0.50.27<x<0.5) compositions as hydrogen storage materials
2005
Exchange bias in nanostructures
2005 Standout
Anisotropic grain growth based on the atomic adsorption model in WC-25 pct Co alloy
2000
Microstructure of (W,Ti)C–Co system containing platelet WC
2010
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
2015 StandoutScience
The standard enthalpies of formation of the compounds of early transition metals with late transition metals and with noble metals as determined by Kleppa and co-workers at the University of Chicago — A review
2001
Works of C.H. Allibert being referenced
Sintering features of cemented carbides WC–Co processed from fine powders
2001
Morphology of WC grains in WC–Co alloys: Theoretical determination of grain shape
2006
A Theoretical and Experimental Study of the Enthalpies of Formation of LaNi5‐Type Compounds
1984
Thermodynamic study of the valence state of cerium and hydrogen storage in Ce(Ni1−xCux)5 compounds
1985
A computer method for random packing of spheres of unequal size
1986
Cr-rich layer at the WC/Co interface in Cr-doped WC–Co cermets: segregation or metastable carbide?
2004
Mechanism of solid-state dissolution of WC in Co-based solutions
2002
Structural and thermodynamic data on the pseudobinary phases R(Co1−xCux)5 WITH R ≡ Sm, Y, Ce
1987
Quantitative analysis of the effect of the binder phase composition on grain growth in WC-Co sintered materials
2003
Morphology of WC grains in WC–Co alloys
2007
Caractérisation structurale d'alliages frittés à base de W: WNiFe, WNiCo ET WNiCr
1977
Optical investigations of a GaSb-AlSb single quantum well
1987
Microstructure Evolution in the Cemented Carbides WC-Co II. Cumulated Effects of Cr Additions and of the C/W Ratio on the Crystal Features of the WC Grains
2002
Phase identification and incipient melting in a cast Co‐Cr surgical implant alloy
1982
Determination of the composition range suitable to the formation of WC–(V,W)Cx–Co materials
2001
Estimate of the diffusion coefficient in Co based liquids
2000
Effect of Nb and Zr on the phases present in Nd-Fe-B alloys for permanent magnets
1989
Apparent viscosity of W–Cu powder compacts during sintering
2004
Genesis of the cell microstructure in the Sm(Co, Fe, Cu, Zr) permanent magnets with 2:17 type
1993
Phase equilibria in the CeCo5-CeCu5 system and structural characterization of the Ce(Co1−xCux)5 phases
1985
Binary system SmCo: revision of the phase diagram in the Co rich field
1996
Saturation magnetization and anisotropy fields in the Sm(Co1−xCux)5 phases
1994
Quantitative evaluation of normal and abnormal grain growth of cemented carbides during liquid phase sintering
1999
Computer simulation code for particle growth in liquid phase sintering
1988
Ostwald ripening growth rate for nonideal systems with significant mutual solubility—II. Ternary systems. Application to liquid phase sintering of WNiCr
1986
Ostwald ripening growth rate for nonideal systems with significant mutual solubility—I. Binary systems
1986
Enthalpies of formation of the LaCu intermetallic phases
1985
Enthalpies of formation of SmCo alloys in the composition range 10–22 at. % Sm
1987
Microstructure Evolution in the Cemented Carbides WC-Co I. Effect of the C/W Ratio on the Morphology and Defects of the WC Grains
2002
Composition, structure and crystallite size of raney catalysts proceeding from several NiAl and FeAl Intermetallic phases
1982
Computer simulation of particle rearrangement in the presence of liquid
1999
Thermodynamic study of the LaNi5−xCux system
1984