Citation Impact
Citing Papers
Powder bed binder jetting additive manufacturing of silicone structures
2018
Metal additive manufacturing in aerospace: A review
2021 Standout
Size dependent strengthening in particle reinforced aluminium
2002
Synthesis of metallic nanoparticles using plant extracts
2013 Standout
Nanomoulding with amorphous metals
2009 StandoutNature
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
The critical role of grain orientation and applied stress in nanoscale twinning
2014
Processing of Bulk Metallic Glass
2009 Standout
High tensile ductility in a nanostructured metal
2002 StandoutNature
Stacking fault energies and slip in nanocrystalline metals
2004 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Particle reinforced aluminium and magnesium matrix composites
1994 Standout
Two-dimensional CFD modelling of flow round profiled FSW tooling
2004
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
2004
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
A new constitutive model for polymeric matrices: Application to biomedical materials
2017
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Atomic-level structure and structure–property relationship in metallic glasses
2010 Standout
Design and Tailoring of Alloys for Additive Manufacturing
2020
Liquidlike atomic environments act as plasticity carriers in amorphous silicon
2005
Nanostructured Al–Fe alloys produced by e-beam deposition: static and dynamic tensile properties
2003
Atomic-scale simulations of the mechanical deformation of nanocrystalline metals
1999
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
The production and application of metal matrix composite materials
2000 Standout
On structural relaxation and viscous work heating during non-Newtonian viscous flow in a Zr55Al10Ni5Cu30 bulk metallic glass
2005
Metal matrix composites – From science to technological significance
2005 Standout
Mechanical behavior of Cu54Ni6Zr22Ti18 bulk amorphous alloy during multi-pass warm rolling
2006
Microstructures and properties of nanocomposites obtained through SPTS consolidation of powders
1998
Prediction of effective thermo-mechanical properties of particulate composites
2007
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Recent development and application products of bulk glassy alloys
2011 Standout
Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites
1994
Mechanical properties of nanocrystalline materials
2005 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
General relationship between strength and hardness
2011 Standout
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Processing and Performance of an All‐Oxide Ceramic Composite
1998
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Tensile properties of particulate-reinforced metal matrix composites
1996
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
2005
Development of Trivex friction stir welding tool Part 1 – two-dimensional flow modelling and experimental validation
2004
Compressive properties of Cu with different grain sizes: sub-micron to nanometer realm
2008
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Review of experimental techniques for high rate deformation and shock studies
2004 Standout
Compressive Behavior of a Zr‐Based Metallic Glass at Cryogenic Temperatures
2006
Nondestructive evaluation of thick-section composites and sandwich structures: A review
2014
Development of Trivex friction stir welding tool Part 2 – three-dimensional flow modelling
2004
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Hardness and strain rate sensitivity of nanocrystalline Cu
2006
Consideration of grain-size effect and kinetics in the plastic deformation of metal polycrystals
2000
Microstructural and mechanical characteristics of in situ metal matrix composites
2000 Standout
The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum
2006
The synthesis, compressive properties, and applications of metal matrix syntactic foams
2011
Micromechanics model for particulate composites
2007
Amorphous Mg-based metal foams with ductile hollow spheres
2007
Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy
2001
Fatigue of particle-and whisker-reinforced metal-matrix composites
2002
A review of recent developments in natural fibre composites and their mechanical performance
2015 Standout
Novel aligned hemp fibre reinforcement for structural biocomposites: Porosity, water absorption, mechanical performances and viscoelastic behaviour
2014
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Particle reinforcement of ductile matrices against plastic flow and creep
1991
Nanocrystalline materials and coatings
2004
Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins
2005
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Enhanced tensile ductility and toughness in nanostructured Cu
2002
Strain hardening, strain rate sensitivity, and ductility of nanostructured metals
2004
What is behind the inverse Hall–Petch effect in nanocrystalline materials?
2007
The influence of chromium addition on the toughness of γ-Niα-Al2O3 interfaces
1997
Workability of aluminium-based metal-matrix composites in cold compression
1995
Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy
2003
Friction stir welding of aluminium alloys
2009 Standout
Structure-Property Relationship of Binder Jetted Fused Silica Preforms to Manufacture Ceramic-Metallic Interpenetrating Phase Composites
2016
High-temperature creep behaviour of powder-metallurgy aluminium composites reinforced with SiC particles of various sizes
1999
The high strain rate compressive response of Mg-Al alloy/fly Ash cenosphere composites
2011
A review of the multi-component utilisation of coal fly ash
2012 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
A microcompression study of shape-memory deformation in U–13at.% Nb
2009
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Nano-sized twins induce high rate sensitivity of flow stress in pure copper
2005
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Review of current trends in research and applications of sandwich structures
2018 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
A digital twin for rapid qualification of 3D printed metallic components
2018
A paradigm shift towards compositionally zero-sum binderless 3D printing of magnesium alloys via capillary-mediated bridging
2018
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
2013
Structural and mechanical properties of polymer nanocomposites
2006 Standout
Mechanical behavior of amorphous alloys
2007 Standout
Numerical simulations of fast crack growth in brittle solids
1994 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron
2003
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
Mechanistic models for additive manufacturing of metallic components
2020
Deformation of electrodeposited nanocrystalline nickel
2003 Standout
Sliding wear behaviour of aluminum syntactic foam: A comparison with Al–10wt% SiC composites
2010
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
Nanocrystalline aluminum and iron: Mechanical behavior at quasi-static and high strain rates, and constitutive modeling
2005
Shear bands as manifestation of a criticality in yielding amorphous solids
2017 StandoutNobel
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
In-situ Measurement of Crystalline Lattice Strains in Polytetrafluoroethylene
2007
Works of Carl Cady being referenced
Influence of Molecular Conformation on the Constitutive Response of Polyethylene: A Comparison of HDPE, UHMWPE, and PEX
2007
The stress/strain behavior of aluminum matrix composites with discontinuous reinforcements
1991
Shear processes in bulk metallic glasses
2005
Deformation of wrought uranium: Experiments and modeling
2010
Martensitic structures and deformation twinning in the U–Nb shape-memory alloys
2001
Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions
2004
Gamma radiation effects on siloxane-based additive manufactured structures
2016
High–rate material modelling and validation using the Taylor cylinder impact test
1999
In‐Plane Mechanical Properties of Several Ceramic‐Matrix Composites
1995
Mechanical Response of AA7075 Aluminum Alloy over a Wide Range of Temperatures and Strain Rates
2000
Micromechanics simulations of glass–estane mock polymer bonded explosives
2003
Strain Fields and Damage around Notches in Ceramic‐Matrix Composites
1996
Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel
2017
Effects of damage on the flow strength and ductility of a ductile Al alloy reinforced with SiC particulates
1990
Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
2012
Influence of strain rate & temperature on the mechanical response of ultrafine-grained Cu, Ni, and Al-4Cu-0.5Zr
1997
Determining the constitutive response of polymeric materials as a function of temperature and strain rate
2003