Citation Impact
Citing Papers
Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations
2023 Standout
Preparation and properties of POSS grafted polypropylene by reactive blending
2008
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
2016 Standout
Mechanical and chemical recycling of solid plastic waste
2017 Standout
Therapeutic potential of adult bone marrow‐derived mesenchymal stem cells in diseases of the skeleton
2010
Single component phosphamide-based intumescent flame retardant with potential reactivity towards low flammability and smoke epoxy resins
2019 Standout
Biorenewable, transparent, and oxygen/moisture barrier nanocellulose/nanochitin-based coating on polypropylene for food packaging applications
2021
A systematic review of randomized controlled trials for plasma exchange in the treatment of thrombotic thrombocytopenic purpura
2007
Poor immunogenicity of BCG in helminth infected population is associated with increased in vitro TGF-β production
2008
The European guideline on management of major bleeding and coagulopathy following trauma: fourth edition
2016 Standout
GUIDELINES FOR THE USE OF FRESH FROZEN PLASMA
2008
Recent advances in bone tissue engineering scaffolds
2012 Standout
Guidelines on the Use of Therapeutic Apheresis in Clinical Practice – Evidence‐Based Approach from the Writing Committee of the American Society for Apheresis: The Eighth Special Issue
2019 Standout
Comparative study of the degradation kinetics of three powder thermoset coatings
2004
Novel epoxy nanocomposite of low Dk introduced fluorine‐containing POSS structure
2007
Surface energies of linear and cross-linked polymers based on isobornyl methacrylate and methacryl-heptaisobutyl POSS
2008
2011 Update to The Society of Thoracic Surgeons and the Society of Cardiovascular Anesthesiologists Blood Conservation Clinical Practice Guidelines
2011 Standout
Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis, curing kinetics, and network properties
2003
A comparison of the mechanical strength and stiffness of MWNT-PMMA and MWNT-epoxy nanocomposites
2007
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Curing behavior of epoxy resin/tung oil anhydride exfoliated nanocomposite by differential scanning calorimetry
2004
Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data
2004
Preparation and characterization of cellulose hybrids grafted with the polyhedral oligomeric silsesquioxanes (POSS)
2009
Properties of silsesquioxane coating modified carbon fibre/polyarylacetylene composites
2007
Effect of water sorption on the structure and mechanical properties of an epoxy resin system
2001
Effect of side chain architecture on dielectric relaxation in polyhedral oligomeric silsesquioxane/polypropylene oxide nanocomposites
2009
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
2007
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
2018 Standout
Recycling of wood fiber‐reinforced HDPE by multiple reprocessing
2016
Guidelines for Infection Control in Dental Health Care Settings
2013 Standout
Silsesquioxane Barrier Materials
2007
Guidelines for Preventing the Transmission of Mycobacterium tuberculosis in Health-Care Settings, 2005
2005
Polypropylene–polyhedral oligomeric silsesquioxanes (POSS) nanocomposites
2005
A perspective approach on the amine reactivity and the hydrogen bonds effect on epoxy-amine systems
2019
Synthesis and application of epoxy resins: A review
2015 Standout
Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives
2021 Standout
Molecular Firefighting—How Modern Phosphorus Chemistry Can Help Solve the Challenge of Flame Retardancy
2018 Standout
New prospects in flame retardant polymer materials: From fundamentals to nanocomposites
2008 Standout
ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations
2014 Standout
The Immune Response in Tuberculosis
2013 Standout
2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Health Care Settings
2007 Standout
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Hybrid Nanocomposites: Advanced Nonlinear Method for Calculating Key Kinetic Parameters of Complex Cure Kinetics
2010
Thermodegradation kinetics of epoxy/DDS/POSS system
2007
Curing behavior of epoxy/POSS/DDS hybrid systems
2007
Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview
2006 Standout
Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry
2004
Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites: Considered in terms of the particle packing model
2006
Viscoelastic properties and residual stresses in polyhedral oligomeric silsesquioxane‐reinforced epoxy matrices
2008
Diglycidylether of iso-eugenol: a suitable lignin-derived synthon for epoxy thermoset applications
2016
Thermal and dielectric properties and curing kinetics of nanomaterials formed from poss-epoxy and meta-phenylenediamine
2004
Surface modification of cotton nanocrystals with a silane agent
2012 Standout
Recommendations for the transfusion of plasma and platelets.
2009
Dispersion of nanofillers in high performance polymers using reactive solvents as processing aids
2001
Thermo-oxygen degradation mechanisms of POSS/epoxy nanocomposites
2007
Large‐Scale Fabrication of Boron Nitride Nanosheets and Their Utilization in Polymeric Composites with Improved Thermal and Mechanical Properties
2009 Standout
Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers
2006 Standout
Preparation and characterization of epoxy/polyhedral oligomeric silsesquioxane hybrid nanocomposites
2009
Chemistry of Carbon Nanotubes
2006 Standout
Effects of silsesquioxane coating structure on mechanical interfacial properties of carbon fibre/polyarylacetylene composites
2007
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
Model‐free kinetics: Curing behavior of phenol formaldehyde resins by differential scanning calorimetry
2002
Synthesis and characterization of cellulose/silica hybrid materials with chemical crosslinking
2009
ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
2011 Standout
Polypropylene metal functionalised POSS nanocomposites: A study by thermogravimetric analysis
2005
Works of C. Ramı́rez being referenced
Plerixafor plus granulocyte CSF can mobilize hematopoietic stem cells from multiple myeloma and lymphoma patients failing previous mobilization attempts: EU compassionate use data
2010
Methylene blue‐photoinactivated plasma vs. fresh‐frozen plasma as replacement fluid for plasma exchange in thrombotic thrombocytopenic purpura
2004
The Effect of BCG Vaccination on Tuberculin Reactivity and the Booster Effect Among Hospital Employees
2001
Thermodegradation kinetics of a hybrid inorganic–organic epoxy system
2005
Isothermal cure of an epoxy/cycloaliphatic amine system. Vitrification and gelation
1995
Epoxy/anhydride networks modified with polyhedral oligomeric silsesquioxanes
2012
Study of an octaepoxysilsesquioxane cured with a diamine
2005
Polymer blends based on an epoxy-amine thermoset and a thermoplastic
2009
Isothermal Cure of anEpoxy System Containing Tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM), a Multifunctional Novolac Glycidyl Ether and 4,4′-Diaminodiphenylsulphone (DDS): Vitrification and Gelation
1997
Isothermal cure kinetics of a diglycidyl ether of bisphenol A/1,3‐bisaminomethylcyclohexane (DGEBA/1,3‐BAC) epoxy resin system
1995
Thermodynamic analysis of polymerization-induced phase separation of a polystyrene in epoxy/monoamine–diamine systems. Effect of monoamine–diamine proportion on the phase diagram
2011
Water Sorption in Tetrafunctional Phenol Novolac Epoxy Mixtures Cured with a Diamine
1998
Organic/inorganic hybrid materials from an epoxy resin cured by an amine silsesquioxane
2007
Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions
1999
Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines
2003
Blends of an epoxy/cycloaliphatic amine resin with poly(ether imide)
2000
Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrification
2001
Dynamic mechanical analysis of an epoxy/thermoplastic blend: polymerization‐induced phase separation
2002
Thermal properties of amine cured diglycidyl ether of bisphenol A epoxy blended with poly(ether imide)
2000
Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing
2004
Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines
2004
Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films
2005
Effect of poly(styrene- co -acrylonitrile) on the curing of an epoxy/amine resin
2001
Epoxy/POSS organic–inorganic hybrids: ATR-FTIR and DSC studies
2008
Decomposition behavior of epoxy-resin systems cured by diamines
2000
Cure kinetics of an epoxy system containing tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM) and a multifunctional Novolac glycidyl ether cured with 4,4′-diaminodiphenylsulfone (DDS)
1997
Cure kinetics of amine-cured diglycidyl ether of bisphenol
2000