Citation Impact
Citing Papers
Size-controlled silver nanoparticles synthesized over the range 5–100 nm using the same protocol and their antibacterial efficacy
2013 Standout
Nanosilver particles in medical applications: synthesis, performance, and toxicity
2014
Bone grafts and biomaterials substitutes for bone defect repair: A review
2017 Standout
Evaluation of the antibacterial activity of a conventional orthodontic composite containing silver/hydroxyapatite nanoparticles
2016
Targeting microbial biofilms: current and prospective therapeutic strategies
2017 Standout
Green synthesis of copper oxide nanoparticles using gum karaya as a biotemplate and their antibacterial application
2013 Standout
Effect of quaternary ammonium and silver nanoparticle-containing adhesives on dentin bond strength and dental plaque microcosm biofilms
2012
Investigating the effect of incorporating nanosilver/nanohydroxyapatite particles on the shear bond strength of orthodontic adhesives
2013
Rheological properties of resin composites according to variations in monomer and filler composition
2005
Influence of light-curing procedures and photo-initiator/co-initiator composition on the degree of conversion of light-curing resins
2005
Modulated photoactivation methods: Influence on contraction stress, degree of conversion and push-out bond strength of composite restoratives
2006
Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels
2007
The Contribution of Lead-Contaminated House Dust and Residential Soil to Children's Blood Lead Levels
1998
Initial dynamic viscoelasticity change of composites during light curing
2010
The growing importance of materials that prevent microbial adhesion: antimicrobial effect of medical devices containing silver
2009
Interpretation of bond failure through conversion and residual solvent measurements and Weibull analyses of flexural and microtensile bond strengths of bonding agents
2004
Comparison of quaternary ammonium-containing with nano-silver-containing adhesive in antibacterial properties and cytotoxicity
2013
Engineering nanosilver as an antibacterial, biosensor and bioimaging material
2011
Water sorption/solubility of dental adhesive resins
2006 Standout
Ecological Hypothesis of Dentin and Root Caries
2016 Standout
Network structures of Bis-GMA/TEGDMA resins differ in DC, shrinkage-strain, hardness and optical properties as a function of reducing agent
2011
Silver as Antibacterial Agent: Ion, Nanoparticle, and Metal
2012 Standout
Nanopesticide research: Current trends and future priorities
2013 Standout
Silver nanoparticles in dentistry
2017
Nanosilica—from medicine to pest control
2008
Effect of amorphous calcium phosphate and silver nanocomposites on dental plaque microcosm biofilms
2012
Perspectives for the use of silver nanoparticles in dental practice
2011
Synthesis, characterization and application of Ag doped ZnO nanoparticles in a composite resin
2018
Slumping resistance and viscoelasticity prior to setting of dental composites
2008
Comparison of Manufacturer‐Recommended Exposure Durations with Those Determined Using Biaxial Flexure Strength and Scraped Composite Thickness Among a Variety of Light‐Curing Units
2009
Resin composite—State of the art
2010 Standout
Influence of silver nanoparticle solution on the mechanical properties of resin cements and intrarradicular dentin
2019
Towards the elucidation of shrinkage stress development and relaxation in dental composites
2004
Review of bioactive glass: From Hench to hybrids
2012 Standout
Effects of resin composite composition and irradiation distance on the performance of curing lights
2004
Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione
2008
3D bioactive composite scaffolds for bone tissue engineering
2017 Standout
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
2014 Standout
Human exposure to bisphenol A (BPA)
2007 Standout
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Dual antibacterial agents of nano‐silver and 12‐methacryloyloxydodecylpyridinium bromide in dental adhesive to inhibit caries
2013
Novel dental adhesives containing nanoparticles of silver and amorphous calcium phosphate
2012
Perspectives for nano-biotechnology enabled protection and nutrition of plants
2011 Standout
An overview of application of silver nanoparticles for biomaterials in dentistry
2018 Standout
<p>The Antibacterial Mechanism of Silver Nanoparticles and Its Application in Dentistry</p>
2020 Standout
Effect of admixed high‐density polyethylene (HDPE) spheres on contraction stress and properties of experimental composites
2003
Influence of silver nano-particles on monomer elution from light-cured composites
2011
Ginsenoside Rg5 improves cognitive dysfunction and beta-amyloid deposition in STZ-induced memory impaired rats via attenuating neuroinflammatory responses
2014
Filler features and their effects on wear and degree of conversion of particulate dental resin composites
2005
Color stability of resin matrix restorative materials as a function of the method of light activation
2004
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
2018 Standout
Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application
2010
Surface texture and roughness of polished nanofill and nanohybrid resin composites
2010
Insufficient cure under the condition of high irradiance and short irradiation time
2008
A review of the biomaterials technologies for infection-resistant surfaces
2013 Standout
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Delayed gelation through chain-transfer reactions: Mechanism for stress reduction In methacrylate networks
2011
Siloranes in dental composites
2004 Standout
Placing Dental Composites—A Stressful Experience
2008
Color difference thresholds in dental ceramics
2010
Polymerization shrinkage and contraction stress of dental resin composites
2005 Standout
Softening and elution of monomers in ethanol
2009
Influence of Photoactivation Protocol and Light Guide Distance on Conversion and Microleakage of Composite Restorations
2009
Polymerization shrinkage kinetics of dimethacrylate resin-cements
2009
Fatigue of dentin–composite interfaces with four-point bend
2007
Exposure to bisphenol A from bis-glycidyl dimethacrylate–based dental sealants
2006
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Heavy Metal Toxicity and the Environment
2012 Standout
How much do resin-based dental materials release? A meta-analytical approach
2011
Calcium Phosphate Cement: Review of Mechanical and Biological Properties
2006
Comparative study of the wear behavior of composites for posterior restorations
2007
Are potential sources for human exposure to bisphenol-A overlooked?
2011 Standout
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Effect of layering methods, composite type, and flowable liner on the polymerization shrinkage stress of light cured composites
2012
Temperature rise induced by various light curing units through human dentin
2009
Relationship between bond-strength tests and clinical outcomes
2009 Standout
The antibacterial effects of silver, titanium dioxide and silica dioxide nanoparticles compared to the dental disinfectant chlorhexidine onStreptococcus mutansusing a suite of bioassays
2012 Standout
A physico-chemical explanation of the post-polymerization shrinkage in dental resins
2005
Determination of polymerization shrinkage stress by means of a photoelastic investigation
2003
Chemical constituents of Panax ginseng and Panax notoginseng explain why they differ in therapeutic efficacy
2020 Standout
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Novel dental adhesive containing antibacterial agents and calcium phosphate nanoparticles
2012
Evaluation of Physical Properties and Surface Degradation of Self-adhesive Resin Cements
2007
Examination of composite resins with electron microscopy, microhardness tester and energy dispersive X-ray microanalyzer
2009
Silver compounds used in dentistry for caries management: A review
2012
Nanoscale hydroxyapatite particles for bone tissue engineering
2011 Standout
BisGMA/TEGDMA ratio and filler content effects on shrinkage stress
2011
Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms
2010 Standout
Thiol–Ene Click Chemistry
2010 Standout
Dental Pulp Defence and Repair Mechanisms in Dental Caries
2015
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
Antibacterial amorphous calcium phosphate nanocomposites with a quaternary ammonium dimethacrylate and silver nanoparticles
2012
Alternatives in Polymerization Contraction Stress Management
2004
Calcium orthophosphate cements for biomedical application
2008
Novel CaF2 Nanocomposite with High Strength and Fluoride Ion Release
2010
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Effect of a denture base acrylic resin containing silver nanoparticles onCandida albicansadhesion and biofilm formation
2014
Oxygen Inhibition in Dental Resins
2005
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
2010 Standout
Anti-biofilm Dentin Primer with Quaternary Ammonium and Silver Nanoparticles
2012
Nanoencapsulation, Nano-guard for Pesticides: A New Window for Safe Application
2016 Standout
High-strength boehmite-acrylate composites for 3D printing: Reinforced filler-matrix interactions
2017
Degradable biomaterials based on magnesium corrosion
2008 Standout
Substituted hydroxyapatites for bone regeneration: A review of current trends
2016
Structural characteristics and thermal properties of plasticized poly(l-lactide)-silica nanocomposites synthesized by sol–gel method
2006
Non-isothermal crystallization kinetics and dynamic mechanical thermal properties of poly(butylene succinate) composites reinforced with cotton stalk bast fibers
2011
New trends in bioactive scaffolds: The importance of nanostructure
2008
Shrinkage forces due to polymerization of light-cured dental composite resin in cavities
2010
Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches
2016 Standout
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Antiadherence and Antimicrobial Properties of Silver Nanoparticles against Streptococcus mutans on Brackets and Wires Used for Orthodontic Treatments
2018
Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments
2021 Standout
Oxygen-Generating Nanofiber Cell Scaffolds with Antimicrobial Properties
2010
Molecular Toxicology of Substances Released from Resin–Based Dental Restorative Materials
2009
Review of Nanomaterials in Dentistry: Interactions with the Oral Microenvironment, Clinical Applications, Hazards, and Benefits
2015
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
2015 Standout
The Use of Nanoparticles to Control Oral Biofilm Formation
2010 Standout
Impact of Curing Protocol on Conversion and Shrinkage Stress
2005
Cu and CuO nanoparticles immobilized by silica thin films as antibacterial materials and photocatalysts
2010
Recent Advances and Developments in Composite Dental Restorative Materials
2010
Color Difference Thresholds in Dentistry
2015 Standout
Formation and Photocatalytic Decomposition of a Pellicle on Anatase Surfaces
2011
New Dental Composites Containing Multimethacrylate Derivatives of Bile Acids: A Comparative Study with Commercial Monomers
2009
Exposure Reciprocity Law in Photopolymerization of Multi‐Functional Acrylates and Methacrylates
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Nanomaterials in Plant Protection and Fertilization: Current State, Foreseen Applications, and Research Priorities
2012 Standout
Works of Bum‐Soon Lim being referenced
Influence of filler distribution on the color parameters of experimental resin composites
2007
Reduction of polymerization contraction stress for dental composites by two-step light-activation
2002
Comparison of a Wipe and a Vacuum Collection Method for the Determination of Lead in Residential Dusts
1994
Effects of TEGDMA and HEMA on the expression of COX-2 and iNOS in cultured murine macrophage cells
2008
Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin
2004
Effect of filler fraction and filler surface treatment on wear of microfilled composites
2002
Comparative in vitro and in vivo studies using a bioactive poly(ε‐caprolactone)‐organosiloxane nanohybrid containing calcium salt
2007
The effect of nanofiller on the opacity of experimental composites
2006
Involvement of oxidative stress in mutagenicity and apoptosis caused by dental resin monomers in cell cultures
2006
Quantitative analysis of adhesion of cariogenic streptococci to orthodontic raw materials
2008
Experimental antimicrobial orthodontic adhesives using nanofillers and silver nanoparticles
2008
Effect of plasma arc curing on polymerization shrinkage of orthodontic adhesive resins
2004
Degree of polymerization of resin composites by different light sources
2002
Changes in scattering and absorption properties of esthetic filling materials after aging
2006
Change of properties during storage of a UDMA/TEGDMA dental resin
2003
Evaluation of a Novel Poly(ε-caprolactone)−Organosiloxane Hybrid Material for the Potential Application as a Bioactive and Degradable Bone Substitute
2004
Influence of porcine liver esterase on the color of dental resin composites by CIEDE2000 system
2004
Changes in surface characteristics of dental resin composites after polishing
2005
Effects of hydrogen peroxide (H2O2) on alkaline phosphatase activity and matrix mineralization of odontoblast and osteoblast cell lines
2006
Effect of the hydrophilic nanofiller loading on the mechanical properties and the microtensile bond strength of an ethanol‐based one‐bottle dentin adhesive
2004
The effect of consistency, specimen geometry and adhesion on the axial polymerization shrinkage measurement of light cured composites
2005
Mechanical properties of calcium phosphate based dental filling and regeneration materials
2003
Dynamic mechanical analysis of storage modulus development in light-activated polymer matrix composites
2002
Comparison of ultraviolet light-induced photocatalytic bactericidal effect on modified titanium implant surfaces.
2011