Citation Impact
Citing Papers
Laser‐induced photoacoustic injury of skin: Effect of inertial confinement
1991
Surface integrity and process mechanics of laser shock peening of novel biodegradable magnesium–calcium (Mg–Ca) alloy
2010
Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths
2001
Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique
2007
Accommodation at deformation twins in bcc crystals
1981
Accommodation and formation of {1121} twins in Co single crystals
1980
Influence of grain size on the mechanical behaviour of some high strength materials
1986
The effect of austenitizing temperature on the microstructure and mechanical properties of as-quenched 4340 steel
1974
Solid state nitrization reaction of amorphous tantalum aluminium nitride alloy powders: the role of amorphization by reactive ball milling
1994
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
An HVEM study of hydrogen effects on the deformation and fracture of nickel
1986
Kinetics and Mechanisms of High‐Temperature Creep in Silicon Carbide: III, Sintered α‐Silicon Carbide
1988 StandoutNobel
The microstructure and mechanical properties of a welded molybdenum alloy
1983
The influence of yttrium additions on the oxide-scale adhesion to an iron-chromium-aluminum alloy
1976
Large strain work hardening and textures
1980
Self-Limiting Hardness Changes in Laser Peened 6061-T6 Aluminium
2001
Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings
2001 StandoutNobel
The transition from dislocation climb to viscous glide in creep of solid solution alloys
1974
Metal matrix composites – From science to technological significance
2005 Standout
Anomalous strain rate dependence of the serrated flow in NiH and NiCH alloys
1990
The effect of hydrogen on the deformation of iron
1974
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
The effect of sheet processing on the microstructure, tensile, and creep behavior of INCONEL alloy 718
2006
Microstructural analysis and tensile properties of thick copper and nickel sputter deposits
1977
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Effect of interstitial solutes on the strength and ductility of titanium
1981
Deformation twinning
1995 Standout
Sintering dense nanocrystalline ceramics without final-stage grain growth
2000 StandoutNature
Superplasticity—Recent advances and future directions
1989 Standout
The plastic deformation of polycrystals I. Aluminium between room temperature and 400°C
1983
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
A fractographic study of hydrogen-assisted cracking and liquid-metal embrittlement in nickel
1986
Subsurface properties of laser peened 6061–T6 Al weldments
2000
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
2003 Standout
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
A theoretical concept for the design of high-temperature materials by dual-scale particle strengthening
2000
The analysis of defect structures and substrate/film interfaces of diamond thin films
1990 StandoutNobel
Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems
1998 Standout
Martensite in steel: strength and structure
1999 Standout
Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials
1998
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Steels for bearings
2011 Standout
Mechanical alloying and milling
2001 Standout
Hydrogen embrittlement associated with strain localization in a precipitation-hardened Fe–Mn–Al–C light weight austenitic steel
2014
Microstructural and mechanical influences on dynamic strain aging phenomena
1994
Current state of Fe-Mn-Al-C low density steels
2017 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
High temperature creep of Ni-20Cr-2ThO2 single crystals
1976
Creep of ceramics
1988
High temperature creep mechanisms in magnesium
1970
Microstructure, adhesion and growth kinetics of protective scales on metals and alloys
1982
The effect of hydrogen on the solid solution strengthening and softening of nickel
1982
Semiempirical, Quantum Mechanical Calculation of Hydrogen Embrittlement in Metals
1983 Standout
Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture
1994 Standout
Hall–Petch relation and boundary strengthening
2004 Standout
Morphological and calorimetric studies on the Amorphization Process of Rod-Milled Al50Zr50 Alloy Powders
1992
Biodegradable metals
2014 Standout
Synthesis of nanocrystalline titanium carbide alloy powders by mechanical solid state reaction
1996
Perspectives on Titanium Science and Technology
2013 Standout
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Physical study of laser-produced plasma in confined geometry
1990 Standout
The microstructure of natural polycrystal diamond, carbonado and ballas
1983
Unstable flow in martensite and ferrite
1970
Deformation mechanisms of a rapidly solidified Al-8.8Fe-3.7Ce alloy
1987
Intergranular fracture of nickel: the effect of hydrogen-sulfur co-segregation
1987
Laser shock-induced mechanical and microstructural modification of welded maraging steel
1990
Yielding in nickel as a function of grain or cell size
1975
Bulk nanostructured materials from severe plastic deformation
2000 Standout
New observations on the mechanisms of dynamic strain aging and of jerky flow
1979
Processing materials with lasers
1976
High temperature deformation of oxide dispersion strengthened al and AlMg solid solutions
1982
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
2002 Standout
The influence of grain boundaries on mechanical properties
1972 Standout
Recent progress in alkaline water electrolysis for hydrogen production and applications
2009 Standout
Laser-generated shock waves in thin films of energetic materials
1995
The effect of hydrogen on the slip character of nickel
1980
Mechanical solid state reaction for synthesis of β–SiC powders
1995
Mechanism of work hardening in Hadfield manganese steel
1981
Microstructural and mechanical influences on dynamic strain aging phenomena
1994
The onset of twinning in metals: a constitutive description
2001 Standout
Atmospheric Effects on Compressive Creep of SiC‐Whisker‐Reinforced Alumina
1991 StandoutNobel
Hydrogen-induced strain localization and failure of austenitic stainless steels at high hydrogen concentrations
1991
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600°C
2007
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Hydrogen Problems in Energy Related Technology
1976
Bulk-nanocrystalline oxide nuclear fuels – An innovative material option for increasing fission gas retention, plasticity and radiation-tolerance
2011
Residual stress and its role in failure
2007 Standout
Mechanical behavior of amorphous alloys
2007 Standout
Mechanisms of Pulsed Laser Ablation of Biological Tissues
2003 Standout
Hydrogen interactions with defects in crystalline solids
1992 Standout
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Materials challenges in nuclear energy
2013 Standout
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
The effect of diffusive hydrogen segregation on fracture of polycrystalline nickel
1986
The transition from dislocation climb to viscous glide in creep of solid solution alloys
1974
Ultrahigh Strength and High Electrical Conductivity in Copper
2004 StandoutScience
Direct observations of enhanced dislocation mobility due to hydrogen
1981
Thermally assisted and mechanically driven solid-state reactions for formation of amorphous AI33Ta67 alloy powders
1996
Laser Peening of Metals - Enabling Laser Technology
1997
2001
Influence of prior mechanical and thermal treatments on shock-induced substructures in molybdenum
1971
Hydrogen the future transportation fuel: From production to applications
2014 Standout
A numerical study of long range internal stresses associated with subgrain boundaries
1980
Surface rippling induced by surface-tension gradients during laser surface melting and alloying
1977 Standout
Current issues in recrystallization: a review
1997 Standout
Interface controlled diffusional creep
1983
Laser shock processing of 2024-T62 aluminum alloy
1998
Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging
2013
Hydrogen-assisted processing of materials
2000
A study of strain-ageing in austenite
1966
Microstructure and creep properties of dispersion-strengthened aluminum alloys
1992
Effects of laser-shock processing on the microstructure and surface mechanical properties of hadfield manganese steel
1995
Structure and properties of ultrafine-grained materials produced by severe plastic deformation
1993 Standout
Works of B.A. Wilcox being referenced
On serrated yielding and negative strain-rate sensitivity
1966
Diffusion of chromium and aluminum in Ni-20Cr and TDNiCr (Ni-20Cr-2ThO2)
1972
The oxidation of Fe-Cr alloys containing an oxide dispersion or reactive metal additions
1974
Effect of hydrogen on dislocation locking in niobium
1960
Observations on strengthening and oxidation behavior of a dispersion hardened Fe-Cr-Base alloy prepared by mechanical alloying
1974
Twin-induced grain boundary cracking in b.c.c. metals
1964
Steady-State Creep of Dispersion-Strengthened Nickel
1967
Laser shock-induced microstructural and mechanical property changes in 7075 aluminum
1972
Quantitative assessment of laser-induced stress waves generated at confined surfaces
1974
Substructural strengthening of a precipitation hardened molybdenum alloy
1967
Intercrystalline fracture in hydrogen-charged nickel
1965
The Influence of Substructures on Tensile Creep of MgO Single Crystals
1979
The high-temperature oxidation of nickel-20 wt. % chromium alloys containing dispersed oxide phases
1972
Creep of Dispersion-Strengthened Nickel–Chromium Alloys
1969
Dislocation substructure induced by creep in molybdenum single crystals
1970
The role of grain size and shape in strengthening of dispersion hardened nickel alloys
1972
High Temperature Tensile Creep of Magnesium Oxide Single Crystals
1976
The influence of stoichiometry on compression creep of polycrystalline UO2+x
1972
The stress dependence for high temperature creep of polycrystalline uranium dioxide
1970
Laser shock hardening of weld zones in aluminum alloys
1977
The Portevin-Le Chatelier effect in hydrogen charged nickel
1964
Deformation and fracture of dispersion-strengthened nickel charged with hydrogen
1972
The high-temperature oxidation of Ni-20%Cr alloys containing various oxide dispersions
1975
Creep of CoO single crystals
1971
The effect of strain rate on dislocation multiplication in polycrystalline molybdenum
1965
Creep behavior of molybdenum single crystals
1970
The effect of a thoria dispersion on the hightemperature oxidation of chromium
1972
Pulsed laser induced deformation in an Fe-3 Wt Pct Si alloy
1977