Citation Impact
Citing Papers
The relationship between indentation and uniaxial creep in amorphous selenium
1995
SEM and EBSD Characterization of Bi-Layered Functionally Graded Hard Metal Composites
2016
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Size dependent strengthening in particle reinforced aluminium
2002
A microbend test method for measuring the plasticity length scale
1998 Standout
Large volume serial section tomography by Xe Plasma FIB dual beam microscopy
2015
Hemp fiber and its composites – a review
2011 Standout
Particle reinforced aluminium and magnesium matrix composites
1994 Standout
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
2012 Standout
A Review on the Natural Fiber-Reinforced Polymer Composites for the Development of Roselle Fiber-Reinforced Polyester Composite
2010 Standout
The dependence of the contiguity of WC on Co content and its independence from WC grain size in WC–Co alloys
2005
Microwave food processing—A review
2013 Standout
Spark plasma sintering behavior of nanocrystalline WC–10Co cemented carbide powders
2003
Ultrafine WC–Ni cemented carbides fabricated by spark plasma sintering
2011
A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications
2014 Standout
Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials
2012 Standout
Modified embedded-atom potentials for cubic materials and impurities
1992 Standout
Experimental study of the mechanics of fracture in WC-Co alloys
1987
Eyeriss: An Energy-Efficient Reconfigurable Accelerator for Deep Convolutional Neural Networks
2016 Standout
Electronic properties of hexagonal tungsten monocarbide (h-WC) with 3d impurities from first-principles calculations
2008
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
2006 Standout
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Review: liquid phase sintering
2008 Standout
Structural stability and lattice defects in copper:Ab initio, tight-binding, and embedded-atom calculations
2001 Standout
Alloys-by-design: Application to new superalloys for additive manufacturing
2020
Cemented carbide microstructures: a review
2018 Standout
The contiguity of carbide crystals of different shapes in cemented carbides
2005
Trends in the P/M hard metal industry
2014
A review on interface modification and characterization of natural fiber reinforced plastic composites
2001
Metal matrix composites – From science to technological significance
2005 Standout
Ceramic materials for thermal barrier coatings
2003 Standout
The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review
2014
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Microstructure and mechanical properties of ultrafine WC–Ni–VC–TaC–cBN cemented carbides fabricated by spark plasma sintering
2011
Macro-porous ceramics: processing and properties
2012 Standout
A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements
1981 Standout
Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel
2013
Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics
1990
Development of TiCN-based cermets: Mechanical properties and wear mechanism
2012
A review of cemented carbides for rock drilling: An old but still tough challenge in geo-engineering
2013
Green composites: A review of adequate materials for automotive applications
2012 Standout
Electron backscatter diffraction: Strategies for reliable data acquisition and processing
2009
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Effect of SiC nano-whisker addition on WC–Ni based cemented carbides fabricated by hot-press sintering
2012
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy
2006
Vacancy defect mobilities and binding energies obtained from annealing studies
1978
EFFECT of METAL SHIELDING ON MICROWAVE HEATING UNIFORMITY of A CYLINDRICAL FOOD MODEL
1992
Some Phenomena in Submicro-Grained WC-Co Cemented Carbide
2006
Characterization and properties of natural fiber polymer composites: A comprehensive review
2017 Standout
A study of the mechanical properties of short natural-fiber reinforced composites
2005 Standout
Experimental studies on the physico-chemical properties of banana fibre from various varieties
2009
Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
2011
On the contiguity of carbide phase in WC–Co hardmetals
2003
Effect of cobalt replacement by nickel on functionally graded cemented carbonitrides
2011
The Frequency and Temperature Dependence of Dielectric Food Data As Determined By A Cavity Perturbation Technique*
1974
Wear properties of sintered WC-12%Co processed via Binder Jet 3D Printing (BJ3DP)
2018
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Effect of changing strain rate on flow stress during hot deformation of Type 316L stainless steel
2008
New Generation of Plasma‐Sprayed Mullite Coatings on Silicon Carbide
1995
Steels for bearings
2011 Standout
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
HRTEM investigation of dislocation interactions in WC
2013
On the use of a sub-scale thermomechanical simulator to obtain accurate tensile properties of (α+β)- and β-processed Ti–6Al–4V
2009
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
2004 Standout
The role of tungsten in the Co binder: Effects on WC grain size and hcp–fcc Co in the binder phase
2014
Study of the tribological behaviors and wear mechanisms of WC-Co and WC-Fe3Al hard materials under dry sliding condition
2016
Biodegradable metals
2014 Standout
Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites
1999
Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys
1986 Standout
Perspectives on Titanium Science and Technology
2013 Standout
Isothermal crystallization and mechanical behavior of ionomer treated sisal/HDPE composites
2008
Influence of Ru additions on the corrosion behaviour of WC–Co cemented carbide alloys in sulphuric acid
2011
Influence of binder metal and surface treatment on the corrosion resistance of (W,Ti)C-based hardmetals
2006
Nickel in hardmetals
1992
Mechanism-based strain gradient plasticity— I. Theory
1999 Standout
Interatomic potentials for monoatomic metals from experimental data andab initiocalculations
1999 Standout
Microstructure and mechanical properties of WC Ni–Si based cemented carbides developed by powder metallurgy
2010
Modeling the effect of flatter shape of WC crystals on the hardness of WC-Ni cemented carbides
2008
Laser beam machining—A review
2007 Standout
A review of mechanical drilling for composite laminates
2011 Standout
Perspective on the Development of High‐Toughness Ceramics
1990 Standout
Review of Machine Learning Approaches for Biomass and Soil Moisture Retrievals from Remote Sensing Data
2015
Solid state sintered nanoscaled hardmetals and their properties
2017
On the fracture toughness of cemented carbides
1988
Corrosion pitting and environmentally assisted small crack growth
2014
Silane coupling agents used for natural fiber/polymer composites: A review
2010 Standout
Recent progress in interfacial toughening and damage self‐healing of polymer composites based on electrospun and solution‐blown nanofibers: An overview
2013
Characterization and properties of MTCVD Ti(C,N) coated cemented carbide substrates with Fe/Ni binder
2009
Gas Pressure and Temperature Dependences of Thermal Conductivity of Porous Ceramic Materials: Part 2, Refractories and Ceramics with Porosity Exceeding 30%
1996
A new type of WC–Co–Ni–Al cemented carbide: Grain size and morphology of γ′-strengthened composite binder phase
2016
Machine learning approaches for crop yield prediction and nitrogen status estimation in precision agriculture: A review
2018 Standout
Microwave Permittivities Of Cracker Dough, Starch and Gluten
1995
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Enhanced surface integrity of AZ31B Mg alloy by cryogenic machining towards improved functional performance of machined components
2011
Hydrogen interactions with defects in crystalline solids
1992 Standout
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
1992 Standout
Formation of Core/Rim Structures in Ti(C,N)‐WC‐Ni Cermets via a Dissolution and Precipitation Process
2000
Structure and role of the interfacial layers in VC-rich WC-Co cermets
2003
An Overview of Microwave Processing and Dielectric Properties of Agri-food Materials
2004 Standout
Electromagnetic Properties of Milk and its Constituents at 2.45 GHz
1992
Investigation of the corrosion behavior of WC–FeAl–B composites in aqueous media
2012
Variation of microwave dielectric properties of hydrocolloids with moisture content, temperature and stoichiometric charge
1992
Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties
2004 Standout
The electromagnetic properties of food materials: A review of the basic principles
1995
WATER BINDING BY SOY FLOURS AS MEASURED BY WIDE LINE NMR
1978
Influence of nitridation on surface microstructure and properties of graded cemented carbides with Co and Ni binders
2008
Analysis and prediction of laser cutting parameters of fibre reinforced plastics (FRP) composite materials
2002
A history of fine grained hardmetal
1995
Gas Pressure and Temperature Dependences of Thermal Conductivity of Porous Ceramic Materials: Part 1, Refractories and Ceramics with Porosity below 30%
1992
The influence of erodent hardness on the erosion behavior of detonation sprayed WC-12Co coatings
2011
Datensammlung zu Hartstoffeigenschaften
1997
Mechanical properties of kenaf fibre reinforced polymer composite: A review
2014 Standout
Functional properties of soy proteins
1979 Standout
Surface integrity in material removal processes: Recent advances
2011 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of B. Roebuck being referenced
Measurement of Particle Size of Ultrafine (Submicrometre) WC Powders
1986
Deformation and fracture processes and the physical metallurgy of WC–Co hardmetals
1988
DIELECTRIC PROPERTIES OF CARBOHYDRATE‐WATER MIXTURES AT MICROWAVE FREQUENCIES
1972
Plane strain fracture toughness test procedures for particulate metal matrix composites
1990
Book Review: World directory and handbook of hardmetals and hard materials
1997
The influence of composition, phase transformation and varying the relative F.C.C. and H.C.P. phase contents on the properties of dilute CoWC alloys
1984
Effects of microstructure on the thermo-mechanical fatigue response of hardmetals using a new miniaturized testing rig
1999
Identification of optimum binder phase compositions for improved WC hard metals
1988
Precracking of fracture-toughness specimens of hardmetals by wedge indentation
1978
Terminology, testing, properties, imaging and models for fine grained hardmetals
1995
On the Rapid Assessment of Mechanical Behavior of a Prototype Nickel-Based Superalloy using Small-Scale Testing
2018
The temperature dependence of γ′ volume fraction in a Ni-based single crystal superalloy from resistivity measurements
2001
Wear mechanisms in abrasion and erosion of WC/Co and related hardmetals
2007
Equivalence of indentation and compressive creep tests on a WC/Co hardmetal
1982
Data Acquisition and Analysis of Tensile Properties for Metal Matrix Composites
1994
Correlation of meso- and micro-scale hardness measurements with the pitting of plastically-deformed Type 304L stainless steel
2007
A novel approach to characterising the mechanical properties of supermartensitic 13 Cr stainless steel welds
2004
On the resistivity transient in a quenched aluminium-indium alloy
1972
In situ observation of crack growth in a WC-Co hardmetal and characterisation of crack growth morphologies by EBSD
2012
Rotating wheel abrasion of WC/Co hardmetals
2004
Recrystallisation of single crystal superalloy CMSX–4
2003
Stress corrosion cracking of a 6% cobalt/ tungsten carbide hard metal
1976
Extending the application areas for titanium carbonitride cermets
1992
Some aspects of the structure of cobalt and nickel binder phases in hardmetals
2011
Miniature thermal cycling tests on aluminium alloy metal matrix composites
1998
Constituent phase nanoindentation of WC/Co and Ti(C,N) hard metals
1996
Phase size distribution in WC/Co hardmetal
1986
Measurement of flow stress in hot plane strain compression tests
2006
Book Review: Handbook of Ceramics and Composites
1990
Application of EBSD to the evaluation of plastic deformation in the mechanical testing of WC/Co hardmetal
2008
Electrochemical polarisation and corrosion behaviour of cobalt and Co(W,C) alloys in 1 N sulphuric acid
1998
Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure
2011
DIELECTRIC PROPERTIES AT MICROWAVE FREQUENCIES OF AGAR GELS.
1975
A novel approach to characterising the mechanical properties of supermartensitic 13 Cr stainless steel welds
2004
Handbook of ceramics and composites
1990
Comparison of EBSD and conventional methods of grain size measurement of hardmetals
2008
Extrapolating hardness-structure property maps in WC/Co hardmetals
2005
Miniaturised thermomechanical tests on hardmetals and cermets
1996
Fracture topography of WC-Co hardmetals
1981