Citation Impact
Citing Papers
Work hardening and dynamical recovery of F.C.C. metals in multiple glide
1989
Hardening stages of [112] copper single crystals at intermediate and high temperatures—I. Mechanical behaviour
1993
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel
2012
Influence of grain size on the mechanical behaviour of some high strength materials
1986
Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials
2012 Standout
Metastable Alumina Polymorphs: Crystal Structures and Transition Sequences
1998 Standout
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Superplastic behavior of iron carbide
1989
Physical metallurgy of Ti–Ni-based shape memory alloys
2005 Standout
On the flow stress of [100]- and [111]-oriented Cu-Mn single crystals: A transmission electron microscopy study
1992
Structural stability and lattice defects in copper:Ab initio, tight-binding, and embedded-atom calculations
2001 Standout
Grain size dependence of the plastic deformation kinetics in Cu
2002
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Athermal mechanisms of size-dependent crystal flow gleaned from three-dimensional discrete dislocation simulations
2008
Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre–vinylester composites using gas plasma treatment
1998
An in situ X ray diffraction study of the kinetics of the Ni2SiO4 olivine‐spinel transformation
1990 StandoutNobel
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
A cell theory for stage IV work hardening of metals and semiconductors
1989
Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system
2000
Twinning in TiAl
1989
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
New trends in creep microstructural models for pure metals
1987
The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and all-polypropylene composites
2007
Deformation twinning
1995 Standout
Short palm tree fibers – Thermoset matrices composites
2005
Superplasticity—Recent advances and future directions
1989 Standout
The MN+1AXN phases: A new class of solids
2000 Standout
A new model for the peak of activation area of α titanium
1995
Energy barriers associated with slip–twin interactions
2011
Relaxation in glassforming liquids and amorphous solids
2000 Standout
Superplasticity of Yttria-Stabilized Tetragonal ZrO2Polycrystals
1986
High-temperature structural intermetallics
2000 Standout
Intrinsic stacking faults in body-centred cubic crystals
1968
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60
2001
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
2010 Standout
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
An in situ study of prismatic glide in magnesium—I. The rate controlling mechanism
1985
On Basal slip and basal twinning in sapphire (α-Al2O3)—II. A new model of basal twinning
1996
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Time-dependent deformation of metals
1985
Creep of ceramics
1988
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
Interfacial plasticity governs strain rate sensitivity and ductility in nanostructured metals
2007
On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
2000 Standout
Polybenzoxazines—New high performance thermosetting resins: Synthesis and properties
2007 Standout
Submillimeter-Laser Magnetospectroscopy in Tellurium Making Use of the Nernst Effect
1974
Perspectives on Titanium Science and Technology
2013 Standout
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Modelling of work hardening and stress saturation in FCC metals
1997
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
2005 Standout
Influence of the Surface on the Galvanomagnetic Properties of Tellurium
1977 StandoutNobel
Plastic anisotropy in b.c.c. transition metals
1998
Dislocation-Based Deformation Mechanisms in Metallic Nanolaminates
1999
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Toughening mechanisms of nanoparticle-modified epoxy polymers
2006 Standout
Interatomic potentials for monoatomic metals from experimental data andab initiocalculations
1999 Standout
Epoxy networks based on dicyandiamide: effect of the cure cycle on viscoelastic and mechanical properties
1990
Glassy Polymers as Matrices for Advanced Composites
1987
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life
2019
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Dislocation nucleation from a crack tip: An analysis based on the Peierls concept
1992 Standout
The onset of twinning in metals: a constitutive description
2001 Standout
Atmospheric Effects on Compressive Creep of SiC‐Whisker‐Reinforced Alumina
1991 StandoutNobel
The search for novel, superhard materials
1999
A Thermally Re-mendable Cross-Linked Polymeric Material
2002 StandoutScience
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Influence of non-glide stresses on plastic flow: from atomistic to continuum modeling
2003
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals
2008
Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen
2001
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
Influence of Fiber Surface Purity on Wicking Properties of Needle-Punched Nonwoven after Oxygen Plasma Treatment
2005
Non-thermal plasma treatment of textiles
2008
Ultrahigh Strength and High Electrical Conductivity in Copper
2004 StandoutScience
High-entropy alloys
2019 Standout
Dislocation modelling of shear in f.c.c. crystals
1985
Etudes structurales d'alumines de transition. I-alumines gamma et delta
1990
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
The role of the weakest-link mechanism in controlling the plasticity of micropillars
2008
Metastable Phases of Alumina
1983
Highly crosslinked polymers
1989
Epoxy composites based on glass beads. II. Mechanical properties
1992
Current issues in recrystallization: a review
1997 Standout
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Superplasticity in advanced materials
1993
The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals
2005
Rheology of synthetic olivine aggregates: Influence of grain size and water
1986
Structure and properties of ultrafine-grained materials produced by severe plastic deformation
1993 Standout
Works of B. Escaig being referenced
Cross-slipping process and the stress-orientation dependence in pure copper
1979
A metallurgical approach to the pre‐yield and yield behavior of glassy polymers
1984
Adhesion improvement of high modulus polyethylene fibers by surface plasma treatment: Evaluation by pull‐out testing
1994
Dynamic recovery and embrittlement in poly(aminobismaleimide) [PABM] resin
1986
Mechanical properties of unsaturated polyester resins in relation to their chemical structure: 2. Plastic deformation behavior
1994
A study of cross-slip activation parameters in pure copper
1988
Influence of the degree of crosslinking on the plastic deformation behaviour of epoxy resins
1988
Sur le glissement dévié des dislocations dans la structure cubique à faces centrées
1968
Plastic deformation of polypropylene in relation to crystalline structure
1999
SUR L'ORIGINE DE LA LIMITE ÉLASTIQUE DES MÉTAUX CUBIQUES CENTRÉS A BASSE TEMPÉRATURE
1966
L'activation thermique des déviations sous faibles contraintes dans les structures h.c. et c.c. Par
1968
The thermally activated deformation of tellurium single crystals
1974
T.E.M. study of high temperature precipitation in (Al2O3)n MgO spinels
1976
Mechanical properties of unsaturated polyester resins in relation to their chemical structure. I. Secondary relaxations and local motions
1994
Cross-slip of twinning dislocations on crossing domain boundaries in ordered Ni3V
1983
Influence of chemical structure on nonelastic mechanical properties in polystyryl‐pyridine resins
1987
Work-hardening rate of glassy polymers: evolution with curing of thermo-set resins
1984
Plastic deformation behaviour of a polyaminobismaleimide thermoset resin
1986
Initiation of Dislocation Slip in the B.C.C. Lattice. The Case of the van der Waals B.C.C. Hexamine
1977
Defect‐Induced Optical Absorption near the Electronic Band Edge of Tellurium
1973
Mechanical Properties of Fine‐Grained Magnesium Oxide at Large Compressive Strains
1980
On the workhardening rate of glassy polymers: 1. Application to the physical ageing of atactic PMMA
1983
A plastic deformation mode for long-period ordered alloys
1973
Effect of domain size on the mechanical properties of ordered Ni3V
1979
High temperature creep of ultrafine-grained Fe-doped MgO polycrystals
1978
High temperature creep behaviour of nearly stoichiometric alumina spinel
1978