Citation Impact
Citing Papers
Climate adaptive building shells: State-of-the-art and future challenges
2013 Standout
Phase change materials and thermal energy storage for buildings
2015 Standout
An approach to design controllers for MIMO fractional-order plants based on parameter optimization algorithm
2017
Material and structural characterization of alkali activated low-calcium brown coal fly ash
2009
First Seconds in a Building’s Life—In Situ Synchrotron X‐Ray Diffraction Study of Cement Hydration on the Millisecond Timescale
2012
Leachability and adverse effects of coal fly ash: A review
2020 Standout
Alkali-activated materials
2017 Standout
Calcined clay limestone cements (LC3)
2017 Standout
3D printing using concrete extrusion: A roadmap for research
2018 Standout
Numerical and experimental study of a combined solar Chinese kang and solar air heating system based on Qinghai demonstration building
2017
Optimization of the building integrated photovoltaic system in office buildings—Focus on the orientation, inclined angle and installed area
2011 Standout
Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement
2007 Standout
Literature review on the use of phase change materials in glazing and shading solutions
2015
Phase change materials and energy efficiency of buildings: A review of knowledge
2019 Standout
Advances in understanding hydration of Portland cement
2015 Standout
Life cycle assessment approach for the optimization of sustainable building envelopes: An application on solar wall systems
2012
A comprehensive review of solar facades. Opaque solar facades
2012
A new collection of real world applications of fractional calculus in science and engineering
2018 Standout
Hygromorphic materials for sustainable responsive architecture
2015 Standout
The Instantaneous Apparent Activation Energy of Cement Hydration Measured Using a Novel Calorimetry‐Based Method
2012
Infrared thermography (IRT) applications for building diagnostics: A review
2014 Standout
Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments
2012 Standout
Cool roofs impact on building thermal response: A French case study
2011
Energy performance of Trombe walls: Adaptation of ISO 13790:2008(E) to the Portuguese reality
2014 Standout
Experimental and numerical investigation of a phase change material: Thermal-energy storage and release
2011
On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations
2008 Standout
Estimation of compressive strength by a new apparent activation energy function
2001
Experimental and numerical characterization of thermal bridges in prefabricated building walls
2010
Nanotechnology innovations for the construction industry
2013 Standout
Study of PV-Trombe wall assisted with DC fan
2006
An improved approach for the application of Trombe wall system to building construction with selective thermo-insulation façades
2009
Mineral admixtures in mortarsQuantification of the physical effects of inert materials on short-term hydration
2005
Mineral admixtures in mortars
2003
Numerical study on thermal behavior of classical or composite Trombe solar walls
2007
A state of the art review of solar walls: Concepts and applications
2013
A review of the current work potential of a trombe wall
2020 Standout
Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020
2013 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
A review on photovoltaic/thermal hybrid solar technology
2009 Standout
Experimental investigation of phase change materials for insulation of residential buildings
2017 Standout
Experimental study of small-scale solar wall integrating phase change material
2011
3D Printing of cement composites
2009
Passive building energy savings: A review of building envelope components
2011 Standout
Are energy consumptions decreased with the addition of a double-skin?
2006
Greenhouse effect in double-skin facade
2006
Review on building energy performance improvement using phase change materials
2017 Standout
Experimental and numerical model of wall like solar heat discharge passive system
2006
Green building research–current status and future agenda: A review
2013 Standout
An experimental and mathematical study of efforts of a novel photovoltaic-Trombe wall on a test room
2007
Effect of solar storage wall on the passive solar heating constructions
2010
Trombe walls: A review of opportunities and challenges in research and development
2012
Interactions between alite and C3A-gypsum hydrations in model cements
2012
Understanding the Filler Effect on the Nucleation and Growth of C‐S‐H
2014 Standout
Combustion properties of coal gangue using thermogravimetry–Fourier transform infrared spectroscopy
2017
The most efficient position of shading devices in a double-skin facade
2006
The use of a heavy internal wall with a ventilated air gap to store solar energy and improve summer comfort in timber frame houses
2005
Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics
2016 Standout
Strategies to improve the energy performance of multiple-skin facades
2006 Standout
Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency
2013 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
A review on solar energy use in industries
2011 Standout
The Vertical Farm: A Review of Developments and Implications for the Vertical City
2018 Standout
Natural cooling strategies efficiency in an office building with a double-skin façade
2004
A review on the application of Trombe wall system in buildings
2016
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
Recent developments in phase change materials for energy storage applications: A review
2018 Standout
The behaviour of solar walls in residential buildings with different insulation levels: An experimental and numerical study
2011
A review of computational optimisation methods applied to sustainable building design
2013 Standout
A review on macro-encapsulated phase change material for building envelope applications
2018 Standout
A review on optimized control systems for building energy and comfort management of smart sustainable buildings
2014 Standout
Experimental investigations on the performance of a collector–storage wall system using phase change materials
2015
Thermal performance of variable density wall panels made using Portland cement or inorganic polymer concrete
2013
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Works of B. Duthoit being referenced
Experimental thermal study of a solar wall of composite type
1997
Characterisation of the thermal effusivity of a partially saturated soil by the inverse method in the frequency domain
2003
Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers
2004
In situ thermal properties characterization using frequential methods
2007
Natural convection by heat flux measurement and anemometry using thermoelectric effects
1993
The use of infrared thermographic and GPS topographic surveys to monitor spontaneous combustion of coal tips
2005
Measurement of low-thermal effusivity of building materials using thermal impedance method
2001
Monitoring and thermal characterisation of cement matrix materials using non-destructive testing
2007
Study of solar walls — validating a simulation model
2002
Determination of apparent activation energy of concrete by isothermal calorimetry
2000
Use of noninteger identification models for monitoring soil water content
2003