Citation Impact
Citing Papers
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment
2004 Standout
Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitors
2011 Standout
The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy
2003
Observation of an adiabatic shear band in titanium by high-voltage transmission electron microscopy
1986
Effects of particles on development of microstructure and texture during rolling and recrystallisation in fcc alloys
1990
Differential RNA splicing and post-translational cleavages in the human salivary proline-rich protein gene system.
1985 StandoutNobel
Orientation dependence of stored energy of cold work in 50% cold rolled copper
1984
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
Equal channel angular extrusion: from macromechanics to structure formation
1999
Electro-optical multichannel spectrometer for transient resonance Raman and absorption spectroscopy
1979
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
1980 StandoutNobel
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
2004 Standout
Synthesis of nanostructured materials by mechanical milling: problems and opportunities
1997
Deformation microstructures and textures of some cold rolled Mg alloys
2004
Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel
2014
Artificial metallic superlattices
1989
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Effect of charge transfer onEELS Mn Ti
2004
Phase relations and structures of solids at high pressures
1976
Superconducting and normal state properties of Li1+x Ti2?x O4 spinel compounds. I. Preparation, crystallography, superconducting properties, electrical resistivity, dielectric behavior, and magnetic susceptibility
1976
Mechanical properties of nanocrystalline materials
2005 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Kinetic mechanism of the formation of fragmented dislocation structures upon large plastic deformations
2002
Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion
1997
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Glass Formation of a Coordination Polymer Crystal for Enhanced Proton Conductivity and Material Flexibility
2016 StandoutNobel
Dislocation-mechanics-based constitutive relations for material dynamics calculations
1987 Standout
Deformation microstructures
1992
The Discovery of a Class of High-Temperature Superconductors
1987 StandoutScienceNobel
Microstructural investigation of friction stir welded 7050-T651 aluminium
2003 Standout
Grain size effects in the deformation of polycrystalline iron
1986
Effect of dislocation hardening on monotonic and cyclic strength of severely deformed copper
2011
Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles
2008
Optimizing rotary processes in synthetic molecular motors
2009 StandoutNobel
Band Bending in Semiconductors: Chemical and Physical Consequences at Surfaces and Interfaces
2012 Standout
Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steel
1993
The strain and grain size dependence of the flow stress of copper
1982
Observations of common microstructural issues associated with dynamic deformation phenomena: Twins, microbands, grain size effects, shear bands, and dynamic recrystallization
2004
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
V–V bond length fluctuations in VO x
2003 StandoutNobel
Recrystallization kinetics within adiabatic shear bands
1997
Review of the anatase to rutile phase transformation
2010 Standout
On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
2010 Standout
Steels for bearings
2011 Standout
Mechanical alloying and milling
2001 Standout
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Development of microstructure in FCC metals during cold work
1999
Structure and bonding in metal-rich compounds: Pnictides, chalcides and halides
1978
The synthesis and structure of nanocrystalline materials produced by mechanical attrition: A review
1993
Nanocrystalline metals prepared by high-energy ball milling
1990
The morphology and crystallography of lath martensite in alloy steels
2006 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Influence of Atomic Vacancies on the Properties of Transition-Metal Oxides. I.Ti O x V O x
1972 StandoutNobel
Suppression of the magnetic phase transition in manganites close to the metal-insulator crossover
2004 StandoutNobel
Cold deformation microstructures
1990
Overview No. 76
1988
Hall–Petch relation and boundary strengthening
2004 Standout
Friction stir welding and processing
2005 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Shear band formation in plane strain compression
1988
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
VO: A strongly correlated metal close to a Mott-Hubbard transition
2007 StandoutNobel
Dynamic deformation behavior of ultrafine-grained low-carbon steels fabricated by equal-channel angular pressing
2005
Cold work hardening in stages IV and V of F.C.C. metals—I. Experiments and interpretation
1993
Overview no. 96 evolution of f.c.c. deformation structures in polyslip
1992
Mechanisms of continuous recrystallization in an AlZrSi alloy
1991
Localized moments in the superconducting Li1+xTi2−xO4 spinel system
1984 StandoutNobel
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
2007 Standout
Microstructure and texture development of copper single crystals deformed by equal-channel angular pressing
2004
Studies of electron irradiation and annealing effects on TiO2 surfaces in ultrahigh vacuum using high-resolution electron microscopy
1991
Condensed Metal Clusters
1981
Electrical and Magnetic Properties of TiO and VO
1972
Microstructure and local crystallography of cold rolled aluminium
1995
Microband formation in shock-loaded and quasi-statically deformed metals
1989
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Giant magnetoresistive in soft ferromagnetic multilayers
1991 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Superconductivity in the TiO and NbO systems
1972
The formation of microbands by cross-slips
1983
Polycrystalline strengthening
1985
Microstructural Evolution and Kinetics for Post-dynamic Transformation in a Plain Low Carbon Steel
2008
The surface science of titanium dioxide
2003 Standout
A simple model for the refinement of nanocrystalline grain size during ball milling
1992
The brass-type texture and its deviation from the copper-type texture
2008
Picosecond excitation and selective intramolecular rates in supersonic molecular beams. II. Intramolecular quantum beats and IVR
1984 StandoutNobel
Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment
2003 Standout
Microstructure Evolution in Deformed Copper and Nickel
2006
Oxoniobates Containing Metal Clusters
1992
Reoxidation ofTi O 2 ( 110 )
2007
The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals
1984
Dislocation modelling of shear in f.c.c. crystals
1985
Overview no. 76
1988 Standout
Microstructural evolution in a non-cell forming metal: AlMg
1993
Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium
1998
Current issues in recrystallization: a review
1997 Standout
Magnetic Properties of Nanostructured Materials
1996 Standout
Inhibition of calcium phosphate precipitation by human salivary secretions
1976
Polyhedral skeletal electron pair approach
1984 Standout
A study of the Li1+xTi2−xO4 spinel system by diffuse-reflectance spectroscopy
1984 StandoutNobel
Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel
1989
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
A study of the spinel materials LiTi2O4 and by photoelectron spectroscopy
1984 StandoutNobel
Works of A.S. Malin being referenced
FeNi superlattice formation by corrosion of Santa Catharina meteorite
1978 Nature
Shear bands in deformed metals
1984
Ultrastructure of the in vitro formation of hydroxyapatite in submandibular saliva of children with cystic fibrosis
1974
Microstructure of cold-rolled copper
1979
Ordered Structure of Titanium Oxide
1966 Nature
The ordered structure of TiO
1967
Deformation of copper and low stacking-fault energy, copperbase alloys
1979
Microstructure and texture of rolled {112}〈111〉 copper single crystals
1988