Standout Papers
Citation Impact
Citing Papers
A review of fuel cell systems for maritime applications
2016 Standout
Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production
2017 Standout
Metal–organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions
2018 Standout
Carbon dioxide capture from open air using covalent organic frameworks
2024 StandoutNatureNobel
Unique Lead Adsorption Behavior of Activated Hydroxyl Group in Two-Dimensional Titanium Carbide
2014
Effective water/wastewater treatment methodologies for toxic pollutants removal: Processes and applications towards sustainable development
2021 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Innovative combination of electrolysis and Fe(II)-activated persulfate oxidation for improving the dewaterability of waste activated sludge
2013
Coagulation/flocculation in dewatering of sludge: A review
2018
Evaluating heavy metal accumulation and potential health risks in vegetables irrigated with treated wastewater
2016 Standout
Development of sludge-based adsorbents: Preparation, characterization, utilization and its feasibility assessment
2015
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
2014 StandoutNature
Remediation techniques for heavy metal-contaminated soils: Principles and applicability
2018 Standout
Extraction of oil from microalgae for biodiesel production: A review
2012
Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis
2012
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Preparation, modification and environmental application of biochar: A review
2019 Standout
Experimental study on liquid/solid phase change for cold energy storage of Liquefied Natural Gas (LNG) refrigerated vehicle
2010
Thermochemical conversion of biomass to second generation biofuels through integrated process design—A review
2010
Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
2015 Standout
Functionally graded materials produced by laser cladding
2000
Water-Enhanced Direct Air Capture of Carbon Dioxide in Metal–Organic Frameworks
2024 StandoutNobel
Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V
2014
Design and simulation of a methanol production plant from CO2 hydrogenation
2013
Introducing and energy analysis of a novel cryogenic hydrogen liquefaction process configuration
2017
The morphology and crystallography of lath martensite in Fe-C alloys
2003 Standout
Review of hydrogen production using chemical-looping technology
2017 Standout
Flexible and conductive MXene films and nanocomposites with high capacitance
2014 Standout
Performance of two iron-based syngas-fueled chemical looping systems for hydrogen and/or electricity generation combined with carbon capture
2016
Review of sewage sludge management: standards, regulations and analytical methods
2014 Standout
Processing techniques for functionally graded materials
2003 Standout
Recent advances in direct air capture by adsorption
2022
2D metal carbides and nitrides (MXenes) for energy storage
2017 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
2015 Standout
Conversion of Biomass into Chemicals over Metal Catalysts
2013 Standout
Modeling of transport phenomena during the coaxial laser direct deposition process
2010
Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing
2016
General Techno-Economic Analysis of CO2 Electrolysis Systems
2018 Standout
Direct Capture of CO2 from Ambient Air
2016 Standout
Sorbents for the Direct Capture of CO2 from Ambient Air
2019
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
2004
Analysis of the use of waste heat obtained from coal-fired units in Organic Rankine Cycles and for brown coal drying
2012
A Coupled Thermal, Fluid Flow, and Solidification Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part I)
2014
Non‐Noble Metal‐based Carbon Composites in Hydrogen Evolution Reaction: Fundamentals to Applications
2017 Standout
The Latrobe Valley post combustion capture project
2009
Bonding of Polyethylenimine in Covalent Organic Frameworks for CO2 Capture from Air
2024 StandoutNobel
Synergetic conditioning of sewage sludge via Fe2+/persulfate and skeleton builder: Effect on sludge characteristics and dewaterability
2015
Acid leaching of heavy metals from contaminated soil collected from Jeddah, Saudi Arabia: kinetic and thermodynamics studies
2015
A review of working fluid and expander selections for organic Rankine cycle
2013 Standout
How the hydrogen production from RES could change energy and fuel markets: A review of recent literature
2019
Recent Advances in Carbon Dioxide Hydrogenation to Methanol via Heterogeneous Catalysis
2020 Standout
Electro-dewatering of drilling sludge with liming and electrode heating
2012
Thermodynamic and economic studies of two new high efficient power-cooling cogeneration systems based on Kalina and absorption refrigeration cycles
2016
Clean solid biofuel production from high moisture content waste biomass employing hydrothermal treatment
2014
Sensing, modeling and control for laser-based additive manufacturing
2002
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Towards underground hydrogen storage: A review of barriers
2022 Standout
Evaluation of amine-based solid adsorbents for direct air capture: a critical review
2022
Understanding the Effect of Water on CO2 Adsorption
2021
Highlights during the development of electrochemical engineering
2013
Laser surface cladding: The state of the art and challenges
2010
2D longitudinal modeling of heat transfer and fluid flow during multilayered direct laser metal deposition process
2012
Measurement of temperature distributions during laser cladding process
2000
Hydrogen as an energy vector
2019 Standout
Increased CO2/N2 selectivity by stepwise fluorination in isoreticular ultramicroporous metal–organic frameworks
2024 StandoutNobel
Review on thermal energy storage with phase change: materials, heat transfer analysis and applications
2002 Standout
Review of geoengineering approaches to mitigating climate change
2014
Challenges in the Greener Production of Formates/Formic Acid, Methanol, and DME by Heterogeneously Catalyzed CO2Hydrogenation Processes
2017 Standout
Effective adsorption of Pd(ii ), Pt(iv ) and Au(iii ) by Zr(iv )-based metal–organic frameworks from strongly acidic solutions
2017
Single and Coupled Electrochemical Processes and Reactors for the Abatement of Organic Water Pollutants: A Critical Review
2015 Standout
Current state of fine mineral tailings treatment: A critical review on theory and practice
2014 Standout
Households’ willingness to pay for developing marine bio-hydrogen technology: The case of South Korea
2019
Ammonia for power
2018 Standout
Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads
2015
Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles
2019 Standout
Prediction of melt pool depth and dilution in laser powder deposition
2006
Life-cycle greenhouse gas analysis of LNG as a heavy vehicle fuel in Europe
2009
Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures
2000
An overview of current status of carbon dioxide capture and storage technologies
2014 Standout
Metal–Carbon Hybrid Electrocatalysts Derived from Ion‐Exchange Resin Containing Heavy Metals for Efficient Hydrogen Evolution Reaction
2016
A new 3D cobalt (II) metal–organic framework nanostructure for heavy metal adsorption
2015
A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications
2015 Standout
Sewage sludge/biomass ash based products for sustainable construction
2013
LNG: An eco-friendly cryogenic fuel for sustainable development
2011 Standout
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
2015
Porous molybdenum carbide microspheres as efficient binder-free electrocatalysts for suspended hydrogen evolution reaction
2016
Optimization methods applied to renewable and sustainable energy: A review
2011 Standout
Heat transfer—a review of 1994 literature
1997
Combating desertification in China: Monitoring, control, management and revegetation
2018 Standout
Multicriteria synthesis of trigeneration systems considering economic and environmental aspects
2011
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition
2006
Transport phenomena during direct metal deposition
2007
Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization
2016
Height Control in Laser Cladding Using Adaptive Sliding Mode Technique: Theory and Experiment
2010
Reducing the Cost of CO2 Capture from Flue Gases Using Aqueous Chemical Absorption
2013
Hydrogen production from renewable and sustainable energy resources: Promising green energy carrier for clean development
2016 Standout
Chemistry of persulfates in water and wastewater treatment: A review
2017 Standout
Single-crystal laser deposition of superalloys: processing–microstructure maps
2001
Rapid tooling by laser powder deposition: Process simulation using finite element analysis
2005
Hydrogen in energy transition: A review
2021 Standout
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
2020
A simple but realistic model for laser cladding
1994
Assessment of greenhouse gas emissions from coal and natural gas thermal power plants using life cycle approach
2013
Axial Compression for Direct Capture of Carbon Dioxide (CO<sub>2</sub>)
2013
Use of Ball Drop Casting and Surface Modification for the Development of Amine-Functionalized Silica Aerogel Globules for Dynamic and Efficient Direct Air Capture
2024
MES (multi-energy systems): An overview of concepts and evaluation models
2013 Standout
An overview of porous silica immobilized amines for direct air CO2 capture
2021
Solvent Impregnated Polymers Loaded with Liquid‐Like Nanoparticle Organic Hybrid Materials for Enhanced Kinetics of Direct Air Capture and Point Source CO2 Capture
2021
Additive manufacturing of metals
2016 Standout
Review on phase change materials (PCMs) for cold thermal energy storage applications
2012 Standout
Works of Andrew Hoadley being referenced
Lignite aided dewatering of digested sewage sludge
2008
Electrical field: A historical review of its application and contributions in wastewater sludge dewatering
2010
An evaluation of a hybrid ion exchange electrodialysis process in the recovery of heavy metals from simulated dilute industrial wastewater
2012
A comparative study of electro-dewatering process performance for activated and digested wastewater sludge
2017
Dewatering of Biomaterials by Mechanical Thermal Expression
2006
Desorption Process for Capturing CO2 from Air with Supported Amine Sorbent
2019
A thermal model of laser cladding by powder injection
1992
In-situ technique for measuring the absorption during laser surface remelting
1991
A comparison of the process integration of shockwave CO2 compression with conventional turbo machinery into PCC power station design
2011
Application of sludge dewatered products to soil and its effects on the leaching behaviour of heavy metals
2010
Application of filtration aids for improving sludge dewatering properties – A review
2011
Reducing the energy penalty of CO2 capture and compression using pinch analysis
2010
An exergy analysis of small-scale liquefied natural gas (LNG) liquefaction processes
2005 Standout
Technoeconomic Evaluation of a Process Capturing CO2 Directly from Air
2019
Benefit of lignite as a filter aid for dewatering of digested sewage sludge demonstrated in pilot scale trials
2010
The sustainability of clean coal technology: IGCC with/without CCS
2010
Optimisation of power stations with carbon capture plants – the trade-off between costs and net power
2012
Heat-flow simulation of laser remelting with experimenting validation
1991
A novel graphical approach to target CO2 emissions for energy resource planning and utility system optimization
2012
Marine microalgae flocculation and focused beam reflectance measurement
2010
Modelling the mechanical thermal expression behaviour of lignite
2009
Cost-benefit analysis of different hydrogen production technologies using AHP and Fuzzy AHP
2014
Process integration analysis of a brown coal-fired power station with CO2 capture and storage and lignite drying
2009
Interaction of polyelectrolyte with digested sewage sludge and lignite in sludge dewatering
2008
An assessment of different solvent-based capture technologies within an IGCC–CCS power plant
2013
CO2 Capture from Air Using Pelletized Polyethylenimine Impregnated MCF Silica
2019
Finite element simulation of laser surface treatments includingconvection in the melt pool
1994
Electro-dewatering of wastewater sludge: Influence of the operating conditions and their interactions effects
2011