Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Why stainless steel corrodes
2002 StandoutNature
Scanning Electrochemical Microscopy for Direct Imaging of Reaction Rates
2007
Solar Water Splitting: Progress Using Hematite (α‐Fe2O3) Photoelectrodes
2011 Standout
Highly active oxide photocathode for photoelectrochemical water reduction
2011 Standout
Synaptic electronics: materials, devices and applications
2013 Standout
Memristive devices for computing
2012 Standout
Dynamic control over cell adhesive properties using molecular-based surface engineering strategies
2009 StandoutNobel
Electrodeposition of hierarchically structured three-dimensional nickel–iron electrodes for efficient oxygen evolution at high current densities
2015 Standout
Fine structure constant and quantized optical transparency of plasmonic nanoarrays
2012
Buffer-regulated biocorrosion of pure magnesium
2011
Recent advances in molecular imprinting technology: current status, challenges and highlighted applications
2011 Standout
Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation
2011
Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti–6Al–7Nb alloy in Hank's solution
2003
Emerging memories: resistive switching mechanisms and current status
2012
Pitting inhibition of stainless steel by surfactants: an electrochemical and surface chemical approach
2003
Evaluation of magnesium ions release, biocorrosion, and hemocompatibility of MAO/PLLA‐modified magnesium alloy WE42
2010
Corrosion Performance of Carbon Steel in Simulated Pore Solution in the Presence of Micelles
2011
Recent developments in stainless steels
2009 Standout
Corrosion Behaviour of a Silane Protective Coating for NdFeB Magnets in Dentistry
2015
Durability of concrete incorporating crushed brick as coarse aggregate
2015
Electronic properties of thermally formed thin iron oxide films
2007
Probing Liquid/Solid Interfaces at the Molecular Level
2012
Structure and Nanostructure in Ionic Liquids
2015 Standout
Electrochemical characterisation of a martensitic stainless steel in a neutral chloride solution
2012
Photo-inhibition of pitting corrosion on types 304 and 316 stainless steels in chloride-containing solutions
1997
Assessing the Corrosion of Commercially Pure Magnesium and Commercial AZ31B by Electrochemical Impedance, Mass-Loss, Hydrogen Collection, and Inductively Coupled Plasma Optical Emission Spectrometry Solution Analysis
2014
Coupling between ionic defect structure and electronic conduction in passive films on iron, chromium and iron–chromium alloys
2000
Passive films on stainless steels—chemistry, structure and growth
2003 Standout
Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions
2006
The photo-inhibition of localized corrosion on stainless steel in neutral chloride solution
1996
Photoelectrochemical analysis on the passive film formed on Ni in pH 8.5 buffer solution
2005
Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications
2019 Standout
Performance enhancement of recycled concrete aggregate – A review
2015 Standout
The effect of Ni in the electrochemical properties of oxide layers grown on stainless steels
2005
Semiconductive behavior of passive films formed on pure Cr and Fe–Cr alloys in sulfuric acid solution
2002
Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review
2014 Standout
Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide
2015 Standout
Electrocatalytic Oxygen Evolution Reaction (OER) on Ru, Ir, and Pt Catalysts: A Comparative Study of Nanoparticles and Bulk Materials
2012 Standout
Enhancement of corrosion resistance of a biomedical grade 316LVM stainless steel by potentiodynamic cyclic polarization
2007
Ni2P as a Janus catalyst for water splitting: the oxygen evolution activity of Ni2P nanoparticles
2015 Standout
Effect of variable intensity ultraviolet radiation on passivity breakdown of AISI Type 304 stainless steel
2000
Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates
2013
Reducing Postharvest Losses during Storage of Grain Crops to Strengthen Food Security in Developing Countries
2017 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Effect of Cefazolin on the corrosion of mild steel in HCl solution
2009 Standout
X‐ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems
2009 Standout
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
Probabilistic modeling of chloride-induced corrosion in concrete structures using first- and second-order reliability methods
2012
Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides
2005
Drugs: A review of promising novel corrosion inhibitors
2011
Nanotechnology innovations for the construction industry
2013 Standout
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
2010 Standout
Electrooxidation of stainless steel AISI 304 in carbonate aqueous solution at pH 8
1996
Electrochemical Studies of the Adsorption Behavior of Bovine Serum Albumin on Stainless Steel
1999
Possibilities and Limitations of Scanning Electrochemical Microscopy of Mg and Mg Alloys
2014
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride
2010
Nanostructured sol–gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3
2005
Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding
2018 Standout
Improved corrosion resistance of Ni–22Cr–13Mo–4W Alloy by surface nanocrystallization
2004
Influence of the Discretization Methods on the Distribution of Relaxation Times Deconvolution: Implementing Radial Basis Functions with DRTtools
2015 Standout
Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates
2017
Self‐Supported Transition‐Metal‐Based Electrocatalysts for Hydrogen and Oxygen Evolution
2019 Standout
Corrosion performance of epoxy coatings modified by nanoparticulate SiO2
2010
Cost‐Effective Alkaline Water Electrolysis Based on Nitrogen‐ and Phosphorus‐Doped Self‐Supportive Electrocatalysts
2017
Influence of molybdenum on the conduction mechanism in passive films on iron–chromium alloys in sulphuric acid solution
2001
Inhibition effect of chromate on the passivation and pitting corrosion of a duplex stainless steel in LiBr solutions using electrochemical techniques
2007
Biodegradable metals
2014 Standout
Studies on the electrocatalytic properties of some austenitic stainless steels for oxygen evolution in an alkaline medium
1991
TiO2 photoanodes for electrically enhanced water splitting
2010
Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate
2005
Ferromagnetic soft continuum robots
2019 Standout
Neural Stimulation and Recording Electrodes
2008 Standout
Photo-electrochemical analysis of passive film formed on Cr in pH 8.5 buffer solution
2001
Semiconductor-based Photocatalytic Hydrogen Generation
2010 Standout
The voltage-dependent electrochemical impedance spectroscopy of CoCrMo medical alloy using time-domain techniques: Generalized Cauchy–Lorentz, and KWW–Randles functions describing non-ideal interfacial behaviour
2010
Use of Electrochemical Noise Measurements for Determining the Rate of Corrosion and the Surfactant Aggregate Transition Concentration at the Mild Steel–Liquid Interface
2004
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
2014 Standout
Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 1: Improved corrosion performance
2014
Electrochemical formation of highly pitting resistant passive films on a biomedical grade 316LVM stainless steel surface
2007
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Corrosion characterization of titanium alloys by electrochemical techniques
2005 Standout
Design, development and techniques for controlling grains post-harvest losses with metal silo for small and medium scale farmers
2011
Microelectrodes for corrosion studies in microsystems
2001
Contact electric impedance and resistance studies of the conduction mechanism in passive films on ferrous alloys
2001
RF-sputtering of iridium oxide to be used as stimulation material in functional medical implants
2006
A review of surfactants as corrosion inhibitors and associated modeling
2017 Standout
Hydrogen Peroxide Detection at Electrochemically and Sol‐Gel Derived Ir Oxide Films
2004
Metallic implant biomaterials
2014 Standout
Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel
2004 Standout
Cocatalysts for Selective Photoreduction of CO2into Solar Fuels
2019 Standout
Electrochemical Glucose Sensors and Their Applications in Diabetes Management
2008 Standout
Localized Corrosion of Magnesium Alloys in NaCl Solutions Explored by Scanning Electrochemical Microscopy in Feedback Mode
2014
Local Hydrogen Fluxes Correlated to Microstructural Features of a Corroding Sand Cast AM50 Magnesium Alloy
2014
New modification procedure of zinc powder in neodymium nitrate solution for improving the electrochemical properties of alkaline zinc electrodes
2008
Recent Trends and Perspectives in Electrochemical Water Splitting with an Emphasis on Sulfide, Selenide, and Phosphide Catalysts of Fe, Co, and Ni: A Review
2016 Standout
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
2010 Standout
Powder bed charging during electron-beam additive manufacturing
2016
Photoelectrochemical analysis of the effects of pH and sulfate ions on the structure and the composition of the passive film formed on Fe-20Cr-15Ni alloy
2009
Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing
2011
Local flux of hydrogen from magnesium alloy corrosion investigated by scanning electrochemical microscopy
2014
Sputtered Iridium Oxide Films as Charge Injection Material for Functional Electrostimulation
2004
Graphene plasmonics
2012 StandoutNobel
Surface Analytical Methods Applied to Magnesium Corrosion
2015
Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott–Schottky analysis
2014
Corrosion protection of aluminum by electrochemically synthesized composite organic coating
2015
Characterization of passive films on shape memory stainless steels
2012
Electrochemical comparison of IrO2 prepared by anodic oxidation of pure iridium and IrO2 prepared by thermal decomposition of H2IrCl6 precursor solution
2009
Investigation of corrosion protection properties of an epoxy nanocomposite loaded with polysiloxane surface modified nanosilica particles on the steel substrate
2014
Determination of effective capacitance and film thickness from constant-phase-element parameters
2009 Standout
Investigating accuracy of the Tafel extrapolation method in HCl solutions
2009
Excellent corrosion protection performance of epoxy composite coatings filled with silane functionalized silicon nitride
2018
Covalently-grafted graphene oxide nanosheets to improve barrier and corrosion protection properties of polyurethane coatings
2015
Molecular imprinting: perspectives and applications
2016 Standout
Localized corrosion of the Mg alloys with inhibitor-containing coatings: SVET and SIET studies
2015
Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
2014 Standout
Works of A.M. Simões being referenced
Electrochemical Methods in Corrosion Research V
1995
Ionic liquid enhanced electrochemical characterization of organic coatings
2008
Imaging concentration profiles of redox-active species in open-circuit corrosion processes with the scanning electrochemical microscope
2004
Chemical Composition of Passive Films on AISI 304 Stainless Steel
1994
An environmentally acceptable primer for galvanized steel: Formulation and evaluation by SVET
2010
Assessment of the corrosion protection of aluminium substrates by a Mg-rich primer: EIS, SVET and SECM study
2008
Use of SVET and SECM to study the galvanic corrosion of an iron–zinc cell
2006
The use of multiple electrochemical techniques to characterize Mg-rich primers for Al alloys
2007
Chemical composition and semiconducting behaviour of stainless steel passive films in contact with artificial seawater
1998
Characterization of rare-earth conversion films formed on the AZ31 magnesium alloy and its relation with corrosion protection
2007
The corrosion performance of organosilane based pre-treatments for coatings on galvanised steel
2000
Semiconducting Properties of Passive Films Formed on Stainless Steels: Influence of the Alloying Elements
1998
E.I.S. evaluation of attached and free polymer films
2000
Composition and corrosion resistance of cerium conversion films on the AZ31 magnesium alloy and its relation to the salt anion
2007
Electrochemical and analytical investigation of passive films formed on stainless steels in alkaline media
2012
The electronic properties of sputtered chromium and iron oxide films
2003
Comparative electrochemical studies of zinc chromate and zinc phosphate as corrosion inhibitors for zinc
2005
Influence of the temperature of film formation on the electronic structure of oxide films formed on 304 stainless steel
2001
Silanes and rare earth salts as chromate replacers for pre-treatments on galvanised steel
2004
An impedance model for the estimation of water absorption in organic coatings. Part I: A linear dielectric mixture equation
2003
Crevice corrosion studies on stainless steel using electrochemical noise measurements
1987
Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET
2005
Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides
2002
An impedance model for the estimation of water absorption in organic coatings. Part II: A complex equation of mixture
2003
Electrochemical behaviour of thermally treated Cr-oxide films deposited on stainless steel
2002
Analytical Characterization of the Passive Film Formed on Steel in Solutions Simulating the Concrete Interstitial Electrolyte
1998
Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques
2003
Capacitance behaviour of passive films on ferritic and austenitic stainless steel
2004
Influence of temperature on the properties of passive films formed on AISI 304 stainless steel
1991
Electrochemical characterisation of oxide films formed on Ti6A14V alloy implanted with Ir for bioengineering applications
1998
SVET and SECM imaging of cathodic protection of aluminium by a Mg-rich coating
2007
The role of Mo in the chemical composition and semiconductive behaviour of oxide films formed on stainless steels
1999
Semiconducting properties of oxide and passive films formed on AISI 304 stainless steel and Alloy 600
2002
Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates
2005
Study of Passive Films Formed on AISI 304 Stainless Steel by Impedance Measurements and Photoelectrochemistry
1990
Electronic structure of iridium oxide films formed in neutral phosphate buffer solution
1998
Composition and behaviour of cerium films on galvanised steel
2001