Citation Impact
Citing Papers
The effect of alkali treatment on the mechanical properties of short pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites.
2010
Climate adaptive building shells: State-of-the-art and future challenges
2013 Standout
One-part alkali-activated materials: A review
2017 Standout
Dye and its removal from aqueous solution by adsorption: A review
2014 Standout
Surface force measurements at the basal planes of ordered kaolinite particles
2010
A Review: Potential Usage of Cellulose Nanofibers (CNF) for Enzyme Immobilization via Covalent Interactions
2014
Towards sustainable concrete
2017 Standout
Adsorption isotherm models: Classification, physical meaning, application and solving method
2020 Standout
Graphene-based semiconductor photocatalysts
2011 Standout
Parameters affecting the photocatalytic degradation of dyes using TiO2-based photocatalysts: A review
2009 Standout
Adsorption kinetic models: Physical meanings, applications, and solving methods
2020 Standout
Optical Properties of ZnO Nanostructures
2006 Standout
A review of experimental techniques to produce a nacre-like structure
2012
Bioinspired structural materials
2014 Standout
Ultrathin and lightweight organic solar cells with high flexibility
2012 Standout
Fundamentals of zinc oxide as a semiconductor
2009 Standout
Alkali-activated materials
2017 Standout
Modified mesoporous clay adsorbent for adsorption isotherm and kinetics of methylene blue
2012
Transparent Conducting Oxides for Photovoltaics
2007
Geopolymer foam concrete: An emerging material for sustainable construction
2014
Geopolymer foams by gelcasting
2013
Titanium Dioxide-Based Nanomaterials for Photocatalytic Fuel Generations
2014 Standout
Single and binary adsorption of sulfonamide antibiotics onto iron-modified clay: linear and nonlinear isotherms, kinetics, thermodynamics, and mechanistic studies
2018
Synthesis and characterization of crystalline tin oxide nanoparticles
2002
A high performance PZT ribbon-based nanogenerator using graphene transparent electrodes
2012
State of the Art and Prospects in Metal–Organic Framework (MOF)-Based and MOF-Derived Nanocatalysis
2019 Standout
Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: Relation microstructure and effective thermal conductivity
2014
Effect of calcination condition on the microstructure and pozzolanic activity of calcined coal gangue
2015
Preparation of YBa2Cu3O7−x superconductor by coprecipitation of nanosize oxalate precursor powder in microemulsions
1993
Influence of limestone on the hydration of Portland cements
2008 Standout
Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate
2005 Standout
A comparison between different foaming methods for the synthesis of light weight geopolymers
2014
Green composites: A review of adequate materials for automotive applications
2012 Standout
Enhanced adsorption of 2,4-dichlorophenol from aqueous solution using modified low cost Algerian geomaterial
2017
Advances in understanding alkali-activated materials
2015 Standout
Photoinduced reactivity of titanium dioxide
2004 Standout
Particulate Photocatalysts for Light-Driven Water Splitting: Mechanisms, Challenges, and Design Strategies
2019 Standout
Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review
2013 Standout
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
Characterization and properties of natural fiber polymer composites: A comprehensive review
2017 Standout
Band Bending in Semiconductors: Chemical and Physical Consequences at Surfaces and Interfaces
2012 Standout
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Review of the anatase to rutile phase transformation
2010 Standout
The effect of heat treatment on the mechanical and structural properties of one-part geopolymer-zeolite composites
2016
Growth, structure and optical characterization of high quality ZnO thin films obtained by spray pyrolysis
1999
Organometal halide perovskite solar cells: degradation and stability
2015 Standout
Synergetic Effect of MoS2 and Graphene as Cocatalysts for Enhanced Photocatalytic H2 Production Activity of TiO2 Nanoparticles
2012 Standout
Geopolymer from kaolin in China: An overview
2015
Improved extraction of alumina from coal gangue by surface mechanically grinding modification
2016
A study on low cost-high conducting fluorine and antimony-doped tin oxide thin films
2005
A review of recent developments in natural fibre composites and their mechanical performance
2015 Standout
Covalent interlocking of glucose oxidase and peroxidase in the voids of paper: enzyme–polymer “spider webs”
2016 StandoutNobel
Probing surface and interface morphology with Grazing Incidence Small Angle X-Ray Scattering
2009
Current state of fine mineral tailings treatment: A critical review on theory and practice
2014 Standout
Recent Advances in the Liquid-Phase Syntheses of Inorganic Nanoparticles
2004 Standout
Preparation of ZnO Nanoparticles: Structural Study of the Molecular Precursor
2003
Indium-doped zinc oxide nanobelts
2004
Supplementary cementitious materials
2011 Standout
A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade
2016 Standout
Applications of hybrid organic–inorganic nanocomposites
2005 Standout
Visible-light driven heterojunction photocatalysts for water splitting – a critical review
2015 Standout
The effect of Zn buffer layer on growth and luminescence of ZnO films deposited on Si substrates
1998
Composition and technological properties of geopolymers based on metakaolin and red mud
2013
Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash
2010 Standout
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
2011
Inorganic foams made from alkali-activated fly ash: Mechanical, chemical and physical properties
2014
Probing Adsorption of Polyacrylamide-Based Polymers on Anisotropic Basal Planes of Kaolinite Using Quartz Crystal Microbalance
2013
Thermodynamic modelling of the hydration of Portland cement
2006
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
The Mechanical Properties of γ-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester Composites
2010
Rigidity analysis of polypropylene/vegetal fibre composites after recycling
2008
Advanced Nanoarchitectures for Solar Photocatalytic Applications
2011 Standout
Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete
2015
Past achievements and future challenges in the development of optically transparent electrodes
2012 Standout
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
A review on the visible light active titanium dioxide photocatalysts for environmental applications
2012 Standout
TiO2−Graphene Nanocomposites for Gas-Phase Photocatalytic Degradation of Volatile Aromatic Pollutant: Is TiO2−Graphene Truly Different from Other TiO2−Carbon Composite Materials?
2010 Standout
Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres
2011 Standout
A pyrosol process to deposit large-area SnO2:F thin films and its use as a transparent conducting substrate for CdTe solar cells
2001
Use of 2D Graphene Nanoplatelets (GNP) in cement composites for structural health evaluation
2014 Standout
Simultaneous adsorption of chromium(VI) and phenol on natural red clay modified by HDTMA
2011
Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: Impact of chemical treatments
2012
Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics
2016 Standout
Green luminescent center in undoped zinc oxide films deposited on silicon substrates
2001 Standout
Characterization and comparative evaluation of thermal, structural, chemical, mechanical and morphological properties of six pineapple leaf fiber varieties for use in composites
2012
Works of Agnès Smith being referenced
Comparison of surface properties between kaolin and metakaolin in concentrated lime solutions
2009
Influence of chemical treatments on adhesion properties of hemp fibres
2010
Surface properties of kaolin and illite suspensions in concentrated calcium hydroxide medium
2006
Application of pyrosol deposition process for large-area deposition of fluorine-doped tin dioxide thin films
1994
Comparison of optical and electrical characteristics of SnO2-based thin films deposited by pyrosol from different tin precursors
1999
Relation between solution chemistry and morphology of SnO2-based thin films deposited by a pyrosol process
1995
Montmorillonite based artificial nacre prepared via a drying process
2006
In situ inorganic foams prepared from various clays at low temperature
2010
Nanostructure and properties of ZnO films produced by the pyrosol process
2003
Chemical modification of hemp fibers by silane coupling agents
2011
Experimental survey of different precursor/solvent pairs for the deposition of tin dioxide by pyrosol
1998
Effect of iron phase on the strengthening of lateritic-based “geomimetic” materials
2012
Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction
2007
Effect of In concentration in the starting solution on the structural and electrical properties of ZnO films prepared by the pyrosol process at 450°C
2000
A model for the preparation of YBa2Cu3O7− orthorhombic phase by controlled precipitation of oxalates
1988
Correlation between hydration mechanism and ultrasonic measurements in an aluminous cement: effect of setting time and temperature on the early hydration
2002
Pyrosol deposition of fluorine-doped tin dioxide thin films
1995
Inter-relationship between deposition temperature and morphology of SnO2 films deposited by a pyrosol process
1992
Characterisation of sol-gel PZT films on Pt-coated substrates
1995
Application of ultrasonic testing to describe the hydration of calcium aluminate cement at the early age
2001
Pyrosol deposition of ZnO and SnO2 based thin films: the interplay between solution chemistry, growth rate and film morphology
2000
Durability of inorganic foam in solution: The role of alkali elements in the geopolymer network
2012
Morphological differences in ZnO films deposited by the pyrosol technique: effect of HCl
1999
Influence of various chemical treatments on the composition and structure of hemp fibres
2007
Comparison of the thermal degradation of natural, alkali‐treated and silane‐treated hemp fibers under air and an inert atmosphere
2008
Effect of pH of the Solution on the Deposition of Zinc Oxide Films by Spray Pyrolysis
1993
Silica fume as porogent agent in geo-materials at low temperature
2010