Citation Impact
Citing Papers
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
2013 Standout
Effects of crystallization and dopant concentration on the emission behavior of TiO2:Eu nanophosphors
2012 Standout
The Role of Host‐derived Dentinal Matrix Metalloproteinases in Reducing Dentin Bonding of Resin Adhesives
2009
A high-performance oxygen evolution catalyst in neutral-pH for sunlight-driven CO2 reduction
2019 StandoutNobel
Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling
2005
Functionally graded materials for biomedical applications
2003
Dentin proteoglycans: An immunocytochemical FEISEM study
2002
Effect of hydration variability on hybrid layer properties of a self-etching versus an acid-etching system
2004
A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics
2011 Standout
Does a low-shrinking composite induce less stress at the adhesive interface?
2009
Technique sensitivity of water-free one-step adhesives
2008
Structural stability and formability of ABO3-type perovskite compounds
2007
SEM and TEM analysis of water degradation of human dentinal collagen
2003
Regional bond strengths of self-etching/self-priming adhesive systems
1998
Micro-rotary fatigue of tooth–biomaterial interfaces
2004
State of the art of self-etch adhesives
2010 Standout
Immunocytochemical analysis of dentin: A double‐labeling technique
2003
Water sorption/solubility of dental adhesive resins
2006 Standout
A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives
2004
Engineering functionally graded tissue engineering scaffolds
2007
The effect of thermocycling regimens on the nanoleakage of dentin bonding systems
2002
Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites
2001
Chemical aspects of self-etching enamel–dentin adhesives: A systematic review
2005 Standout
Bioceramics of calcium orthophosphates
2009
Effect of cavity configuration and aging on the bonding effectiveness of six adhesives to dentin
2004
Effects of phosphoric acid and glutaraldehyde‐HEMA on dentin collagen
2001
In Vitro Bonding Performance of Self-etch Adhesives: II—Ultramorphological Evaluation
2008
In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM
2004
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Matrix Metalloproteinases and Other Matrix Proteinases in Relation to Cariology: The Era of ‘Dentin Degradomics'
2015 Standout
Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives
2007
Single-step adhesives are permeable membranes
2002 Standout
Submicron hiati in acid-etched dentin are artifacts of desiccation
2002
Adhesion to chondroitinase ABC treated dentin
2007
Dimensional changes of demineralized human dentine during preparation for scanning electron microscopy
1996
Fracture resistance of dentin-composite interfaces using different adhesive resin layers
2001
Structure–function relationships of immunostimulatory polysaccharides: A review
2015 Standout
The dentin substrate: structure and properties related to bonding
1997
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Fatigue resistance of dentin/composite interfaces with an additional intermediate elastic layer
2005
Four‐year water degradation of a resin‐modified glass‐ionomer adhesive bonded to dentin
2004
Activation of gelatinolytic/collagenolytic activity in dentin by self‐etching adhesives
2006
Immunohistochemical and biochemical assay of MMP-3 in human dentine
2011
Nanoleakage within the hybrid layer: A correlative FEISEM/TEM investigation
2005
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Aggressiveness of contemporary self-etching systems
2001 Standout
Extension of a one-step self-etch adhesive into a multi-step adhesive
2005
Six‐Month Storage‐Time Evaluation of One‐Bottle Adhesive Systems to Dentin
2003
Effect of acidic conditioners on dentin morphology, molecular composition and collagen conformation in situ
1997
Activating lattice oxygen redox reactions in metal oxides to catalyse oxygen evolution
2017 Standout
Relationship between bond-strength tests and clinical outcomes
2009 Standout
Adhesion/decalcification mechanisms of acid interactions with human hard tissues
2001
Water movement in the hybrid layer after different dentin treatments
2004
Bonding effectiveness of two contemporary self-etch adhesives to enamel and dentin
2009
Dental adhesion review: Aging and stability of the bonded interface
2007 Standout
Total-etch versus self-etch adhesive
2003
Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation
2006 Standout
Bond strength of self-etch adhesives to dentin prepared with three different diamond burs
2008
Nanoscale hydroxyapatite particles for bone tissue engineering
2011 Standout
State of the art etch-and-rinse adhesives
2010 Standout
Immunohistochemical identification of MMP‐2 and MMP‐9 in human dentin: Correlative FEI‐SEM/TEM analysis
2008
Clinical effectiveness of contemporary adhesives: A systematic review of current clinical trials
2005 Standout
Effect of acid etching time and technique on interfacial characteristics of the adhesive–dentin bond using differential staining
2004
Interfacial micromorphology and shear bond strength of single-bottle primer/adhesives
1997
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
A review on fundamentals for designing oxygen evolution electrocatalysts
2020 Standout
Origin of Interfacial Droplets with One-step Adhesives
2007
Mineralogy and geochemistry of hydrothermal kaolins from the Adelita mine, Patagonia (Argentina); relation to other mineralization in the area
2012
Development of a Self-etch Adhesive for Resin-modified Glass Ionomers
2006
Longevity of Posterior Composite Restorations
2014 Standout
Bis- and Trisindolylmethanes (BIMs and TIMs)
2009 Standout
The durability of adhesion to phosphoric acid etched, wet dentin substrates
1998
Four-year Water Degradation of Total-etch Adhesives Bonded to Dentin
2003 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Monomer-Solvent Phase Separation in One-step Self-etch Adhesives
2005
Effect of grain boundary engineering on hydrogen embrittlement in Fe-Mn-C TWIP steel at various strain rates
2018
Genetic Analyses from Ancient DNA
2004 StandoutNobel
Hardening evolution of AZ31B Mg sheet
2006 Standout
Homogeneous/Inhomogeneous‐Structured Dielectrics and their Energy‐Storage Performances
2017 Standout
Current Understanding of Structure–Processing–Property Relationships in BaTiO 3 –Bi( M )O 3 Dielectrics
2016
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression
2004
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Weakly coupled relaxor behavior of BaTiO3-Bi(Mg1/2Ti1/2)O3 lead-free ceramics
2013
Carrageenans: Biological properties, chemical modifications and structural analysis – A review
2009 Standout
Study of internal stresses in a TWIP steel analyzing transient and permanent softening during reverse shear tests
2010
Biological activities and potential health benefits of sulfated polysaccharides derived from marine algae
2010 Standout
Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod
2016
Effect of Water Storage on the Bonding Effectiveness of 6 Adhesives to Class I Cavity Dentin
2006
Characterisation of microbial attack on archaeological bone
2003
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
Immunohistochemical analysis of collagen fibrils within the hybrid layer: a FEISEM study.
2004
A precipitation-hardened high-entropy alloy with outstanding tensile properties
2015 Standout
Quantum Chemical Design of Doped Ca2MnAlO5+δ as Oxygen Storage Media
2015
Structural and Dielectric Properties of Bi (Mg 1/2 Ti 1/2 )O 3 –BaTiO 3 Lead‐Free Ceramics
2011
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Large energy-storage density in transition-metal oxide modified NaNbO3–Bi(Mg0.5Ti0.5)O3lead-free ceramics through regulating the antiferroelectric phase structure
2020
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
2019 Standout
Biodegradable metals
2014 Standout
Filler Debonding & Subhybrid-layer Failures in Self-etch Adhesives
2010
Hydroxyapatite and Hydroxyapatite-Based Ceramics
2002
Recent Developments in the Methods and Applications of the Bond Valence Model
2009 Standout
Ca2Mn2O5 as Oxygen-Deficient Perovskite Electrocatalyst for Oxygen Evolution Reaction
2014
Influence of doped rare earth elements on electronic properties of the R0.25Ca0.75MnO3 systems
2010
Twinning-induced plasticity (TWIP) steels
2017 Standout
A novel lead‐free bismuth magnesium titanate thin films for energy storage applications
2018
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
Effect of remaining dentin thickness and the use of conditioner on micro-tensile bond strength of a glass-ionomer adhesive
2001
Calcium orthophosphate-based biocomposites and hybrid biomaterials
2009
Comparison of Single Crystal Simple Shear Deformation Experiments with Crystal Plasticity Finite Element Simulations
2004
Perovskite lead-free dielectrics for energy storage applications
2018 Standout
Continuous, large strain, tension/compression testing of sheet material
2005
Collagen Degradation by Host-derived Enzymes during Aging
2004 Standout
Influence of the Chemical Structure of Functional Monomers on Their Adhesive Performance
2008
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Comparative Study on Adhesive Performance of Functional Monomers
2004 Standout
Works of A.B. Lopes being referenced
Retrogression and re-ageing of 7075 aluminium alloy: microstructural characterization
1999
Porosity control of hydroxyapatite implants
1999
Morphological field emission-SEM study of the effect of six phosphoric acid etching agents on human dentin
1996
Field emission SEM comparison of four postfixation drying techniques for human dentin
1995
Structure and magnetic properties of Ca2Fe1−xMnxAlO5+δ
2008
Strain hardening rate sensitivity and strain rate sensitivity in TWIP steels
2015
Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample
2003
Behavior of REE and other trace and major elements during weathering of granitic rocks, Évora, Portugal
1993
Ca-site substitution induced a metal–insulator transition in manganite CaMnO3
2008
Synthesis and characterization of porous κ-carrageenan/calcium phosphate nanocomposite scaffolds
2007
Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear
2002
Crystal Structure of Metastable Perovskite Bi(Mg1/2Ti1/2)O3: Bi-Based Structural Analogue of Antiferroelectric PbZrO3
2006
Artificial aging and shear deformation behaviour of 6022 aluminium alloy
2003
Hardening behavior and structural evolution upon strain reversal of aluminum alloys
2002