Citation Impact
Citing Papers
Microstructural and Mechanical Characteristics of AZ61 Magnesium Alloy Processed by High-Pressure Torsion
2007
Development of High-Pressure Sliding Process for Microstructural Refinement of Rectangular Metallic Sheets
2009
Effect of Strain Path in High-Pressure Torsion Process on Hardening in Commercial Purity Titanium
2007
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
A Review of Strain Analysis Using Electron Backscatter Diffraction
2011 Standout
Development of new metallic alloys for biomedical applications
2012 Standout
Hydrostatic Extrusion as a Method of Grain Refinement in Metallic Materials
2006
Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding
2008
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
FIB damage of Cu and possible consequences for miniaturized mechanical tests
2007
Atomic-level structure and structure–property relationship in metallic glasses
2010 Standout
Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure
2009
Evolution of microstructure and microtexture in fcc metals during high-pressure torsion
2006
Severe plastic deformation (SPD) processes for metals
2008
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
The significance of strain reversals during processing by high-pressure torsion
2008
Producing bulk ultrafine-grained materials by severe plastic deformation
2006
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation
2007
Formation and structures of bulk nanocrystalline intermetallic alloys studied by transmission electron microscopy
2006
Effect of HPT processing on the structure, thermoelectric and mechanical properties of Sr0.07Ba0.07Yb0.07Co4Sb12
2012
Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion
2005
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion
2008
Influence of stacking fault energy on nanostructure formation under high pressure torsion
2005
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion
2011
Effect of friction stir processing parameters on the microstructural and electrical properties of copper
2015
General relationship between strength and hardness
2011 Standout
Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion
2011
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Evolution of microstructural homogeneity in copper processed by high-pressure torsion
2010
The Innovation Potential of Bulk Nanostructured Materials
2007
Nanoscale structural refinement via deformation twinning in face-centered cubic metals
2009
Strain hardening during high pressure torsion deformation
2005
The influence of back pressure on ECAP processed AA 6016: Modeling and experiment
2007
Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness
2005
Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
2008
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Ultrafine grain development in copper during multidirectional forging at 195 K
2007
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Steels for bearings
2011 Standout
Structural rejuvenation in a bulk metallic glass induced by severe plastic deformation
2009
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
The evolution of homogeneity in processing by high-pressure torsion
2006
Partial amorphization of a Cu–Zr–Ti alloy by high pressure torsion
2006
Influence of the relaxation processes on the structure formation in pure metals and alloys under high-pressure torsion
2007
TEM investigations of the structural evolution in a pearlitic steel deformed by high-pressure torsion
2006
Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys
2008
Saturation of Fragmentation During Severe Plastic Deformation
2010
Strain gradient plasticity modelling of high-pressure torsion
2007
On the evolution of a deformation induced nanostructure in a Ni3Al alloy
2005
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Advances in thermoelectric materials research: Looking back and moving forward
2017 StandoutScience
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
2007 Standout
High-pressure torsion using ring specimens
2007
Effect of high-pressure torsion on hydrogen trapping in Fe–0.01 mass% C and type 310S austenitic stainless steel
2009
The effect of high-pressure torsion on the microstructure and hydrogen absorption kinetics of ball-milled Mg70Ni30
2010
Stabilizing nanostructures in metals using grain and twin boundary architectures
2016
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Grain refinement in coarse-grained 7475 Al alloy during severe hot forging
2005
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment
2015
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Formation of a W?25%Cu nanocomposite during high pressure torsion
2005
Size effects of primary/secondary twins on the atomistic deformation mechanisms in hierarchically nanotwinned metals
2013
High Pressure Torsion of Rail Steels
2006
Bulk nanocrystalline ω-Zr by high-pressure torsion
2007
The emergence of perovskite solar cells
2014 Standout
n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R=Sr, La, Mm, DD, SrMm, SrDD) approaching ZT≈2.0
2013
Extreme structural inhomogeneities in high-pressure torsion samples along the axial direction
2011
The use of severe plastic deformation techniques in grain refinement
2004
From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy
2003
High pressure torsion to refine grains in pure aluminum up to saturation: mechanisms of structure evolution and their dependence on strain
2012
High-pressure torsion, a new processing route for thermoelectrics of high ZTs by means of severe plastic deformation
2012
Microstructure and mechanical properties of nanocrystalline titanium and Ti–Ta–Nb alloy manufactured using various deformation methods
2005
Defect based micromechanical modelling and simulation of nanoSPD CP-Ti in post-deformation
2005
The effect of cryogenic temperature and change in deformation mode on the limiting grain size in a severely deformed dilute aluminium alloy
2008
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting
2012
Microstructural evolution in commercial purity aluminum during high-pressure torsion
2005
Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
2005
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of A. Vorhauer being referenced
Microstructures of Nickel Deformed by High Pressure Torsion to High Strains
2003
Magnetic Properties and Microstructure of a FeCo Ferritic Steel after Severe Plastic Deformation
2006
HPT-Deformation of Copper and Nickel Single Crystals
2006
On the Onset of a Steady State in Body-Centered Cubic Iron during Severe Plastic Deformation at Low Homologous Temperatures
2007
Disorientations as a function of distance: a new procedure to analyze local orientation data
2003
Structural refinement of low alloyed steels during severe plastic deformation
2004
Structure of Cu deformed by high pressure torsion
2004
On the homogeneity of deformation by high pressure torsion
2004
The Role of Hydrostatic Pressure in Severe Plastic Deformation
2003