Citation Impact
Citing Papers
Life Cycle Energy and Climate Change Implications of Nanotechnologies
2012
Simulation of droplet spreading, splashing and solidification using smoothed particle hydrodynamics method
2008
Temperature Measurements and Adhesion Properties of Plasma Sprayed Thermal Barrier Coatings
1999
A review of fuel cell systems for maritime applications
2016 Standout
Amorphous phase formation in plasma-sprayed hydroxyapatite coatings
1998
Nanotechnology for environmentally sustainable electromobility
2016 StandoutNobel
Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis – A review
2013
Induction plasma sprayed nano hydroxyapatite coatings on titanium for orthopaedic and dental implants
2010 Standout
Calcium orthophosphate deposits: Preparation, properties and biomedical applications
2015
Amorphorization and recrystallization during plasma spraying of hydroxyapatite
1995
Process and technological aspects of municipal solid waste gasification. A review
2011 Standout
Thermal plasma technology for the treatment of wastes: A critical review
2008
Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings
2003
Biological and Medical Significance of Calcium Phosphates
2002 Standout
Chemical influences on adsorption-mediated self-propelled drop movement
2002
Thermal processing of hydroxyapatite for coating production
1998
Fundamentals of inorganic solid-state electrolytes for batteries
2019 Standout
Laser material processing
2011 Standout
Atmospheric pressure plasmas: A review
2005 Standout
Transport coefficients of argon, nitrogen, oxygen, argon-nitrogen, and argon-oxygen plasmas
1994 Standout
DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…
2005 Standout
Effect of particle charging on momentum and heat transfer from rarefied plasma flow
1991
Microstructure, composition and property relationships of plasma-sprayed thermal barrier coatings
1992
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
2010 Standout
Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review
2011
Microfluidics: Fluid physics at the nanoliter scale
2005 Standout
Airflow control by non-thermal plasma actuators
2007 Standout
Beyond fossil fuel–driven nitrogen transformations
2018 StandoutScienceNobel
Complex (dusty) plasmas: Current status, open issues, perspectives
2005 Standout
Comparative measurements on thermal plasma jet characteristics in atmospheric and low pressure plasma sprayings
1995
Ceramic materials for thermal barrier coatings
2003 Standout
Synthesis in Pure Ethanol and Characterization of Nanosized Calcium Phosphate Fluoroapatite
1996
Production of Acetylene and Acetylene-based Chemicals from Coal
2013 Standout
An overview of hydrogen production technologies
2008 Standout
Lowering the global warming impact of bridge rehabilitations by using Ultra High Performance Fibre Reinforced Concretes
2012
Plasma assisted combustion: Dynamics and chemistry
2015 Standout
Thermal plasma materials processing?Applications and opportunities
1989
Experimental investigation of atmospheric pressure nonequilibrium plasma chemistry
1997
Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics
2012 Standout
System optimization and cost analysis of plasma catalytic reforming of natural gas
2000
On the topographic and energetic surface modifications induced by laser treatment of metallic substrates before plasma spraying
2003
Thermal spraying of Co,Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications
2009
From waste to electricity through integrated plasma gasification/fuel cell (IPGFC) system
2010
Review on electrical discharge plasma technology for wastewater remediation
2013 Standout
Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries
2019
Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes
1991
Physics of high-pressure helium and argon radio-frequency plasmas
2004
Parameters controlling solidification of molten wax droplets falling on a solid surface
1999
Thermal plasma processing
1991
Gas discharge plasmas and their applications
2002
The atmospheric-pressure plasma jet: a review and comparison to other plasma sources
1998 Standout
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments
2010 Standout
Thermal plasma modelling
2005
Reactive species in non-equilibrium atmospheric-pressure plasmas: Generation, transport, and biological effects
2016 Standout
Latest Developments in Suspension and Liquid Precursor Thermal Spraying
2009
Plasma assisted ignition and combustion
2006 Standout
Effect of nano-silica in concrete; a review
2021 Standout
Plasma Catalysis as an Alternative Route for Ammonia Production: Status, Mechanisms, and Prospects for Progress
2017
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Influence des potentiels d'intéraction sur les propriétés de transport des plasmas thermiques : exemple d'application le plasma argon hydrogène à la pression atmosphérique
1983
An overview of advances in biomass gasification
2016 Standout
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
2016 Standout
Low Temperature Plasma‐Based Sterilization: Overview and State‐of‐the‐Art
2005 Standout
Progress in metal-supported solid oxide fuel cells: A review
2010
Potential of cold gas dynamic spray as additive manufacturing technology
2013
On atmospheric-pressure non-equilibrium plasma jets and plasma bullets
2012 Standout
Rationally Designing High-Performance Bulk Thermoelectric Materials
2016 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
2013 Standout
High-pressure plasma spraying of hydroxyapatite powders
2002
Transport coefficients of air, argon-air, nitrogen-air, and oxygen-air plasmas
1995 Standout
Synthesis of SiC powder by RF plasma technique
2011
Plasma catalytic reforming of methane
1999
Carbon nanotube reinforced metal matrix composites - a review
2010
Impact, recoil and splashing of molten metal droplets
2000
Overview on advanced thermal barrier coatings
2010 Standout
Thermal-barrier coatings for more efficient gas-turbine engines
2012 Standout
Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants
1998 Standout
Maximum Diameter of Impacting Liquid Droplets
2014 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Structural and Optical Properties of Silicon Carbide Powders Synthesized from Organosilane Using High-Temperature High-Pressure Method
2021 StandoutNobel
Simulations of Droplet Spreading and Solidification Using an Improved SPH Model
2009
Mesures de température dans les plasmas thermiques
1996
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Deposition of tin droplets on a steel plate: simulations and experiments
1998
Plasma spraying of alumina: Plasma and particle flow fields
1993
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Graphene reinforced metal and ceramic matrix composites: a review
2016
CH4–CO2 reforming by plasma – challenges and opportunities
2010
Atmospheric Plasma Spraying of High Melting Temperature Complex Perovskites for TBC Application
2009
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
Partial Evaporation of Strontium Zirconate During Atmospheric Plasma Spraying
2009
Experimental study on coal pyrolysis to acetylene in thermal plasma reactors
2012
Works of A. Vardelle being referenced
Thermal plasmas
1997
Residual Stress Measurements in Cold Sprayed Tantalum Coatings
2012
Comparison of Plasma-Sprayed Coatings Produced in Argon or Nitrogen Atmosphere
1997
Parameters controlling the generation and properties of plasma sprayed zirconia coatings
1995
Plasma—particle momentum and heat transfer: Modelling and measurements
1983
Thermal plasmas
1997
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF POWDER VAPORIZATION UNDER THERMAL PLASMA CONDITIONS
1990
Experimental investigation of powder vaporization in thermal plasma jets
1991
Diagnostics of thermal spraying plasma jets
1992
Effect of a substrate on the temperature distribution in an argon-hydrogen thermal plasma jet
1994
Modelling of the plasma spray process with liquid feedstock injection
2008
<I>Quo Vadis</I> Thermal Spraying?
2001
Arc Plasma Torch Modeling
2009
Life cycle assessment of using powder and liquid precursors in plasma spraying: The case of yttria-stabilized zirconia
2010
Thermal plasma deposition from thick to thin coatings and from micro- to nanostructure
2005
Knowledge Concerning Splat Formation: An Invited Review
2004
Plasma spraying of ceramic particles in argon-hydrogen D.C. Plasma jets: Modeling and measurements of particles in flight correlation with thermophysical properties of sprayed layers
1989
Microstructure Development During Plasma Spraying of Molybdenum Part 2: Coating Microstructure and Properties
1998
Innovative and emerging processes in plasma spraying: from micro- to nano-structured coatings
2011
Modeling the Restrike Mode Operation of a DC Plasma Spray Torch
2006
Controlling Particle Injection in Plasma Spraying
2001
Reactive thermal plasmas: ultrafine particle synthesis and coating deposition
1997
Coating generation: Vaporization of particles in plasma spraying and splat formation
1996
Pending problems in thermal plasmas and actual development
2000
Modelling of plasma spraying of ceramic coatings at atmospheric pressure
1991
A Perspective on Plasma Spray Technology
2014
Corrélations entre les propriétés des dépôts et les conditions de fonctionnement d'une installation de projection plasma : un exemple, l'alumine y
1981
An Evaluation of the Electric Arc Spray and (HPPS) Processes for the Manufacturing of High Power Plasma Spraying MCrAlY Coatings
2001
Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes
1995
Plasma spray: Study of the coating generation
1996
Diagnostics for particulate vaporization and interactions with surfaces
1992
Splat formation and cooling of plasma-sprayed zirconia
1997
Plasma spraying and extractive metallurgy: comparisons between mathematical modelling and measurements and between application and development
1985