Citation Impact
Citing Papers
The formation of α + β microstructure in as-fabricated selective laser melting of Ti–6Al–4V
2014
Metallic materials for 3D printing
2016
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
2016
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting
2013
Thermal storage of sensible heat using concrete modules in solar power plants
2014
Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication
2013
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
2017
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Magnesium and its alloys as orthopedic biomaterials: A review
2005 Standout
In vitro study on newly designed biodegradable Fe‐X composites (X = W, CNT) prepared by spark plasma sintering
2013
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
2013
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
2014
Processing of Bulk Metallic Glass
2009 Standout
A light-driven artificial flytrap
2017 Standout
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
2015
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Strong tough hydrogels via the synergy of freeze-casting and salting out
2021 StandoutNature
Bioinspired structural materials
2014 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Biomedical titanium alloys and their additive manufacturing
2016
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting
2016
Recent developments in stainless steels
2009 Standout
Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting
2015
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
2013
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
2013
Coarsening in Sintering: Grain Shape Distribution, Grain Size Distribution, and Grain Growth Kinetics in Solid-Pore Systems
2010
Manufacture, characterisation and application of cellular metals and metal foams
2001 Standout
Glow-discharge nitriding of sintered stainless steels
2001
Challenges and Opportunities for Solar Evaporation
2019 Standout
A Review of Additive Manufacturing
2012 Standout
Passive films on stainless steels—chemistry, structure and growth
2003 Standout
Influences of Energy Density on Porosity and Microstructure of Selective Laser Melted 17- 4PH Stainless Steel
2013
Metal Additive Manufacturing: A Review of Mechanical Properties
2016
Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V
2016
XPS and AES investigation of nanometer composite coatings of NiPZnX on steel surface (ZnX = ZnSnO3, Zn3(PO4)2, ZnSiO3)
2001
Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component
2015
Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
2013
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Controlling Phase Composition in Selective Laser Melted Stainless Steels
2012
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
2013
Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments
2018
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
2018
Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
2015
Review: reaction synthesis processing of Ni–Al intermetallic materials
2001
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
2014
Mitigation of thermal distortion during additive manufacturing
2016
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
RESIDUAL STRESS MEASUREMENTS AND STRUCTURAL INTEGRITY IMPLICATIONS FOR SELECTIVE LASER MELTED TI-6AL-4V
2012
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
2015
Electroless nickel plating on silicon carbide nanoparticles
2003
Improving Structural Integrity with Boron-based Additives for 3D Printed 420 Stainless Steel
2015
Low temperature plasma nitrocarburising of AISI 316 austenitic stainless steel
2004
Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
2017
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
2012
Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis
2016
Electroless nickel, alloy, composite and nano coatings – A critical review
2013 Standout
Metal-based reactive nanomaterials
2008 Standout
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
2021
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
A novel electroless plating of Ni–P–TiO2 nano-composite coatings
2010
Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
2016
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
2014
Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
2016
Sintering of freeformed maraging steel with boron additions
2003
Steels for bearings
2011 Standout
The effects of Hot Isostatic Pressing on parts fabricated by binder jetting additive manufacturing
2018
Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery
2014
Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials
2011
A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
2013
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
2014
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti–6Al–4V powder fractions
2013
Lasers in additive manufacturing: A review
2017
Anisotropic strain in nitrided austenitic stainless steel
2000
Metastable phase formation and enhanced diffusion in f.c.c. alloys under high dose, high flux nitrogen implantation at high and low ion energies
1994
Advances in additive manufacturing of metal-based functionally graded materials
2020
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
2014
Friction performance optimization of electroless Ni–P coatings using the Taguchi method
2008
Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
2015
A review of powder additive manufacturing processes for metallic biomaterials
2017
Thermal energy storage materials and systems for solar energy applications
2016 Standout
Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
2017
Ti-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties
2015
Materials for additive manufacturing
2017
Metal ion release from nitrogen ion implanted CoCrMo orthopedic implant material
2005
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
Fracture Behavior of Layered Alumina Microstructural Composites with Highly Textured Layers
2013
Friction and wear of electroless NiP and NiP+PTFE coatings
2005
Biodegradable metals
2014 Standout
Microstructural evolution and thermal stability after aging of a cobalt-containing martensitic bearing steel
2016
A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
2018
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V
2013
Design of anti-icing surfaces: smooth, textured or slippery?
2016 Standout
Effect of silicon content and aging time on density, hardness, toughness and corrosion resistance of sintered 303LSC–Si stainless steels
2006
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition
2014
Steels in additive manufacturing: A review of their microstructure and properties
2019
Beam speed effects on Ti–6Al–4V microstructures in electron beam additive manufacturing
2014
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
2012 Standout
Development of electroless NiP–PTFE–SiC composite coating
2003
Der Einfluß von Kupfer auf das Korrosions und Passivierungsverhalten von Eisen‐Chrom‐Legierungen Teil I: Elektrochemisches Verhalten in schwefelsauren Elektrolyten
1994
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
2015
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
2016
Development of porous medical implant scaffolds via laser additive manufacturing
2012
Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
2015
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
2014
Plasma immersion ion implantation of stainless steel: austenitic stainless steel in comparison to austenitic-ferritic stainless steel
1996
Mechanism of copper action on pitting phenomena observed on stainless steels in chloride media
2004
Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering
2005
Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
2017
Metallic implant biomaterials
2014 Standout
Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles
2015
From Molecules to Frameworks to Superframework Crystals
2021 StandoutNobel
Wear behaviour of electroless Ni–P coatings and optimization of process parameters using Taguchi method
2008
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
2014
Production of Porous β-Type Ti–40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing
2013
Dynamic behaviour of high strength steel parts developed through laser assisted direct metal deposition
2014
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
2018
Cryogenic Treatment of Tool Materials: A Review
2010
Manufacturing and processing of NiTi implants: A review
2011
On the Fatigue Performance of Additively Manufactured Ti-6Al-4V to Enable Rapid Qualification for Aerospace Applications
2016
3D printing of ceramics: A review
2018 Standout
Electroless Ni–P composite coatings
2003
Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder
2014
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding
2000
Effect of build direction on the fracture toughness and fatigue crack growth in selective laser melted Ti‐6Al‐4 V
2015
Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite
2013
Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
2015
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
2015
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties
2015
Effects of residual carbon content on sintering shrinkage, microstructure and mechanical properties of injection molded 17-4 PH stainless steel
2002
Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
2015
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
2013
Microstructural evolution of injection molded gas- and water-atomized 316L stainless steel powder during sintering
2004
Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing
2018
High-entropy alloys
2019 Standout
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
2015
Microstructure Evolution, Tensile Properties, and Fatigue Damage Mechanisms in Ti-6Al-4V Alloys Fabricated by Two Additive Manufacturing Techniques
2015
Review on powder-based electron beam additive manufacturing technology
2014
In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
2016
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
2015
Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
2013
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
Additive manufacturing of metals
2016 Standout
Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
2016
The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response
2006
MeV-ion-beam induced localized enhancement of magnetization in stainless steel foils
1991
Works of A. Molinari being referenced
True and apparent Young’s modulus in ferrous porous alloys
1999
Microstructure and mechanical properties of cp-titanium produced by spark plasma sintering
2008
Analysis of reliability of powder metallurgy steels by means of weibull statistics
1992
Dimensional Changes Occurring During Reactive Sintering of Ni–Al–Mo Elemental Powder Mixtures
1997
Electrochemical Characterization of Copper-Alloyed Sintered Stainless Steel in Borate Solutions
1990
Microstructure and mechanical properties of Ti‐6Al‐4V produced by electron beam melting of pre‐alloyed powders
2009
Plasma nitriding of Fe–Cr–Mo sintered steels
1999
Study of the uniaxial cold compaction of AISI 316L stainless steel powders through single action tests
2016
Dilatometric study of solid state sintering of austenitic stainless steel
1997
Tension-compression asymmetric mechanical behaviour of lattice cellular structures produced by selective laser melting
2020
Dilatometry study of the sintering behavior of boron-alloyed Fe-1.5 pct Mo powder
2000
Investigation of liquid-phase sintering by image analysis
1995
Effect of deep cryogenic treatment on the mechanical properties of tool steels
2001
Ion-nitriding of sintered steels — present situation and perspectives
1990
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
2010
Liquid Phase Sintering of a Boron Alloyed Austenitic Stainless Steel
2007
Sintering Mechanisms of Boron Alloyed AISI 316L Stainless Steel
1994
Metastable Austenite in 17–4 Precipitation‐Hardening Stainless Steel Produced by Selective Laser Melting
2010
Dimensional and geometrical precision of powder metallurgy parts sintered and sinterhardened at high temperature
2013
Phase transformations of a nitrogen-implanted austenitic stainless steel (X10 CrNiTi 18-9)
1989
Plastic behavior and deformation textures of poly(etherether ketone) under uniaxial tension and simple shear
1995
The microstructure and mechanical properties of Fe–Cu materials fabricated by pressure-less-shaping of nanocrystalline powders
2007
Surface durability of electroless Ni–P composite deposits
1999
Alumina/Silicon Carbide Laminated Composites by Spark Plasma Sintering
2009
Thermal stability of retained austenite in bainitic steel: an in situ study
2011
Image analysis investigation of the effect of the process variables on the porosity of sintered chromium steels
2003
Phase transformation in a nanostructured M300 maraging steel obtained by SPS of mechanically alloyed powders
2010
Unravelling corrosion in P-enriched stainless steel
1999
Corrosion Study of Industrially Sintered Copper Alloyed 316L Austenitic Stainless Steel
1991
Mechanical properties of nanostructured and ultrafine-grained iron alloys produced by spark plasma sintering of ball milled powders
2007
Sintering transformations in mixtures of austenitic and ferritic stainless steel powders
2001