Citation Impact
Citing Papers
Effects of Intravenous Zoledronic Acid Once Yearly on Bone Remodeling and Bone Structure
2007
2014 AHA/ACC Guideline for the Management of Patients With Valvular Heart Disease
2014 Standout
KDIGO clinical practice guideline for the diagnosis, evaluation, prevention, and treatment of Chronic Kidney Disease-Mineral and Bone Disorder (CKD-MBD)
2009 Standout
X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
2018
2014 AHA/ACC Guideline for the Management of Patients With Valvular Heart Disease
2014 Standout
European guidance for the diagnosis and management of osteoporosis in postmenopausal women
2012 Standout
Bortezomib attenuates murine collagen-induced arthritis
2008
Bone grafts and biomaterials substitutes for bone defect repair: A review
2017 Standout
Shaping ability and cleaning effectiveness of two single‐file systems in severely curved root canals of extracted teeth: Reciproc and WaveOne versus Mtwo and ProTaper
2011 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Effect of Different Concentrations of Sodium Hypochlorite on Outcome of Primary Root Canal Treatment: A Randomized Controlled Trial
2019
Radiation effects on bone architecture in mice and rats resulting from in vivo micro-computed tomography scanning
2008
MicroCT Evaluation of Three-Dimensional Mineralization in Response to BMP-2 Doses In Vitro and in Critical Sized Rat Calvarial Defects
2007
Longitudinal Effects of Aging on Serum Total and Free Testosterone Levels in Healthy Men
2001 Standout
Shaping Ability of Reciprocating Motion in Curved Root Canals: A Comparative Study with Micro–Computed Tomography
2011
Diet and exercise during growth have site-specific skeletal effects: a co-twin control study
2005
Efficiency of Hand and Rotary Instruments in Shaping Oval Root Canals
2002
Osteoporosis
2019 Standout
Compartmental Bone Morphometry in the Mouse Femur: Reproducibility and Resolution Dependence of Microtomographic Measurements
2005
Classification of trabeculae into three‐dimensional rodlike and platelike structures via local inertial anisotropy
2009
Testosterone Therapy in Men with Androgen Deficiency Syndromes: An Endocrine Society Clinical Practice Guideline
2010 Standout
Risedronate preserves bone architecture in postmenopausal women with osteoporosis as measured by three-dimensional microcomputed tomography
2004
Molecular imaging in living subjects: seeing fundamental biological processes in a new light
2003 Standout
Smooth flexible versus active tapered shaft design using NiTi rotary instruments
2002
Progressive versus constant tapered shaft design using NiTi rotary instruments
2003
A biomechanical perspective on bone quality
2006
Dynamic torque and apical forces of ProFile .04 rotary instruments during preparation of curved canals
2002
The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage
2004
Quantitative Microcomputed Tomography Assessment of Intratrabecular, Intertrabecular, and Cortical Bone Architecture in a Rat Model of Severe Renal Osteodystrophy
2007
Three‐dimensional morphometric analysis of human cadaver bone: microstructural data from maxilla and mandible
2004
Evaluation of Three-dimensional Image Registration Methodologies for In Vivo Micro-computed Tomography
2006
Long-term risedronate treatment normalizes mineralization and continues to preserve trabecular architecture: Sequential triple biopsy studies with micro-computed tomography
2006
Clinical Implications and Microbiology of Bacterial Persistence after Treatment Procedures
2008
Two-week longitudinal survey of bone architecture alteration in the hindlimb-unloaded rat model of bone loss: sex differences
2006
Three‐dimensional analysis of nonhuman primate trabecular architecture using micro‐computed tomography
2001
A microtomographic system for the nondestructive evaluation of bone architecture
1996
Comparative investigation of two rotary nickel–titanium instruments: ProTaper versus RaCe. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth
2004
Extended apical enlargement with hand files versus rotary NiTi files. Part II
2006
Novel Endodontic Disinfection Approach Using Catalytic Nanoparticles
2018
Quantitative assessment of articular cartilage morphology via EPIC-μCT
2008
Suboptimal Debridement Quality Produced by the Single-file F2 Protaper Technique in Oval-shaped Canals
2010
Comparison of Microcomputed Tomographic and Microradiographic Measurements of Cortical Bone Porosity
2004
Comparison of radiograph‐based texture analysis and bone mineral density with three‐dimensional microarchitecture of trabecular bone
2010
The effect of cleaning procedures on fracture properties and corrosion of NiTi files
2003
Bone Quality — The Material and Structural Basis of Bone Strength and Fragility
2006 Standout
Influence of Continuous or Reciprocating Motion on Cyclic Fatigue Resistance of 4 Different Nickel-Titanium Rotary Instruments
2012 Standout
Towards quantitative 3D imaging of the osteocyte lacuno-canalicular network
2010
Assessment of bone tissue mineralization by conventional x-ray microcomputed tomography: Comparison with synchrotron radiation microcomputed tomography and ash measurements
2008
Porosity of 3D biomaterial scaffolds and osteogenesis
2005 Standout
Comparative study on the shaping ability and cleaning efficiency of rotary Mtwo instruments. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth
2006
An overview of application of silver nanoparticles for biomaterials in dentistry
2018 Standout
Signs of irreversible architectural changes occur early in the development of experimental osteoporosis as assessed by in vivo micro-CT
2008
Three-dimensional arrangement of β-tricalcium phosphate granules evaluated by microcomputed tomography and fractal analysis
2014
Microbial status of apical root canal system of human mandibular first molars with primary apical periodontitis after “one-visit” endodontic treatment
2005
Lack of Exercise Is a Major Cause of Chronic Diseases
2012 Standout
Multimodal Imaging Analysis of Tumor Progression and Bone Resorption in a Murine Cancer Model
2006
Compressive fatigue behavior of human vertebral trabecular bone
2005
Beam hardening artifacts in micro-computed tomography scanning can be reduced by X-ray beam filtration and the resulting images can be used to accurately measure BMD
2009
Irrigation Trends among American Association of Endodontists Members: A Web-based Survey
2011 Standout
Strontium signaling: Molecular mechanisms and therapeutic implications in osteoporosis
2012
Improvements in hip trabecular, subcortical, and cortical density and mass in postmenopausal women with osteoporosis treated with denosumab
2013
Mineral Trioxide Aggregate: A Comprehensive Literature Review—Part I: Chemical, Physical, and Antibacterial Properties
2009 Standout
Review of Contemporary Irrigant Agitation Techniques and Devices
2009 Standout
Constant mineralization density distribution in cancellous human bone
2003
Effects of Two Nickel-Titanium Instrument Systems, Mtwo versus ProTaper Universal, on Root Canal Geometry Assessed by Micro–Computed Tomography
2011
Root Canal Irrigants
2006 Standout
Analysis of 3D bone ingrowth into polymer scaffolds via micro-computed tomography imaging
2004
Assessment of trabecular bone microarchitecture by two different x‐ray microcomputed tomographs: A comparative study of the rat distal tibia using Skyscan and Scanco devices
2009
Lasers in endodontics
2004
Automatic segmentation of cortical and trabecular compartments based on a dual threshold technique for in vivo micro-CT bone analysis
2007
Nanoparticulates for Antibiofilm Treatment and Effect of Aging on Its Antibacterial Activity
2010
Detecting and tracking local changes in the tibiae of individual rats: a novel method to analyse longitudinal in vivo micro-CT data
2003
Effect of sterilization on the cutting efficiency of PVD-coated nickel-titanium endodontic instruments
2002
Nutrition: its role in bone health
2008
ProTaper rotary root canal preparation: assessment of torque and force in relation to canal anatomy
2003
Current Challenges and Concepts in the Preparation of Root Canal Systems: A Review
2004 Standout
Excised Bone Structures in Mice: Imaging at Three-dimensional Synchrotron Radiation Micro CT
2003
Trabecular bone modulus–density relationships depend on anatomic site
2003
Interaction between EDTA and Sodium Hypochlorite: A Nuclear Magnetic Resonance Analysis
2006
Porous scaffold design for tissue engineering
2005 Standout
Rotary Nickel-Titanium GT and ProTaper Files for Root Canal Shaping by Novice Operators: A Radiographic and Micro–Computed Tomography Evaluation
2009
The Effect of QMix, an Experimental Antibacterial Root Canal Irrigant, on Removal of Canal Wall Smear Layer and Debris
2010
Alteration in the inherent metallic and surface properties of nickel–titanium root canal instruments to enhance performance, durability and safety: a focused review
2011
Histologic Investigation of Root Canal–treated Teeth with Apical Periodontitis: A Retrospective Study from Twenty-four Patients
2009 Standout
Combining high-resolution micro-computed tomography with material composition to define the quality of bone tissue
2003
Comparing Apical Preparations of Root Canals Shaped by Nickel-Titanium Rotary Instruments and Nickel–Titanium Hand Instruments
2001
Root canal preparation with FlexMaster: asessment of torque and force in relation to canal anatomy
2003
Coronavirus Disease 19 (COVID-19): Implications for Clinical Dental Care
2020 Standout
Root‐canal preparation with FlexMaster: canal shapes analysed by micro‐computed tomography
2003
Histological Analysis Of The Cleaning Capacity Of Nickel‐Titanium Rotary Instrumentation With Ultrasonic Irrigation In Root Canals
2004
Irrigation in Endodontics
2010
BoneJ: Free and extensible bone image analysis in ImageJ
2010 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Strontium (Sr) and silver (Ag) loaded nanotubular structures with combined osteoinductive and antimicrobial activities
2015
Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments
2013 Standout
Comparison of bone loss induced by ovariectomy and neurectomy in rats analyzed by in vivo micro‐CT
2009
Mechanisms of uniformity of yield strains for trabecular bone
2004
Evaluation of fetal bone structure and mineralization in IGF-I deficient mice using synchrotron radiation microtomography and Fourier transform infrared spectroscopy
2006
Micro-CT studies on 3-D bioactive glass–ceramic scaffolds for bone regeneration
2008
The osteoporotic vertebral structure is well adapted to the loads of daily life, but not to infrequent “error” loads
2004
Shaping ability and cleaning effectiveness of Mtwo versus coated and uncoated EasyShape instruments in severely curved root canals of extracted teeth
2011
Inflammatory bone loss: pathogenesis and therapeutic intervention
2012 Standout
Canal preparation with Hero 642 rotary Ni–Ti instruments compared with stainless steel hand K‐file assessed using computed tomography
2005
ProTaper rotary root canal preparation: effects of canal anatomy on final shape analysed by micro CT
2003
Physiology and Pathophysiology of Carnosine
2013 Standout
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
2009 Standout
FEBio: Finite Elements for Biomechanics
2012 Standout
ImageJ for Microscopy
2007 Standout
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
2010 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Synchrotron Radiation Microtomography Allows the Analysis of Three-Dimensional Microarchitecture and Degree of Mineralization of Human Iliac Crest Biopsy Specimens: Effects of Etidronate Treatment
2002
Standardized nomenclature, symbols, and units for bone histomorphometry: A 2012 update of the report of the ASBMR Histomorphometry Nomenclature Committee
2012 Standout
Computing Local Thickness of 3D Structures with ImageJ
2007
Microrobots for Minimally Invasive Medicine
2010 Standout
Bone microarchitecture assessment: current and future trends
2003
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Biomechanics of Trabecular Bone
2001
Trabecular bone microstructure scales allometrically in the primate humerus and femur
2013
Changes in Bone Structure and Mass With Advancing Age in the Male C57BL/6J Mouse
2002
Mechanical preparation of root canals: shaping goals, techniques and means
2005 Standout
Osteoporosis in Men
2008
Quantitative Computed Tomography-Based Finite Element Models of the Human Lumbar Vertebral Body: Effect of Element Size on Stiffness, Damage, and Fracture Strength Predictions
2003
Birth and Death of Bone Cells: Basic Regulatory Mechanisms and Implications for the Pathogenesis and Treatment of Osteoporosis*
2000 Standout
Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)
2018 Standout
An Improved Segmentation Method for In Vivo μCT Imaging
2004
In VivoAssessment of Trabecular Bone Microarchitecture by High-Resolution Peripheral Quantitative Computed Tomography
2005
Morphometric Analysis of Human Bone Biopsies: A Quantitative Structural Comparison of Histological Sections and Micro-Computed Tomography
1998
Skeletal Changes in Rats Given Daily Subcutaneous Injections of Recombinant Human Parathyroid Hormone (1-34) for 2 Years and Relevance to Human Safety
2002
Noninvasive In Vivo Monitoring of Bone Architecture Alterations in Hindlimb-Unloaded Female Rats Using Novel Three-Dimensional Microcomputed Tomography
2003
Eradication of endodontic infection by instrumentation and irrigation solutions
2005
2020 ACC/AHA Guideline for the Management of Patients With Valvular Heart Disease: A Report of the American College of Cardiology/American Heart Association Joint Committee on Clinical Practice Guidelines
2020 Standout
Effects of mechanical and chemical procedures on root canal surfaces
2005
From Estrogen-Centric to Aging and Oxidative Stress: A Revised Perspective of the Pathogenesis of Osteoporosis
2010 Standout
Guidelines for assessment of bone microstructure in rodents using micro–computed tomography
2010 Standout
Nature’s hierarchical materials
2007 Standout
Mechanical Consequences of Bone Loss in Cancellous Bone
2001
Digital volume correlation including rotational degrees of freedom during minimization
2002
Effects of Root Canal Preparation on Apical Geometry Assessed by Micro–Computed Tomography
2009
Calcific Aortic Valve Stenosis: Methods, Models, and Mechanisms
2011
Ultralight, ultrastiff mechanical metamaterials
2014 StandoutScience
Characterization of Porosity in a Laser Sintered MMCp Using X-Ray Synchrotron Phase Contrast Microtomography
2011
Direct Three-Dimensional Morphometric Analysis of Human Cancellous Bone: Microstructural Data from Spine, Femur, Iliac Crest, and Calcaneus
1999 Standout
Development and sequelae of canal transportation
2006
Applicability of zinc complex of L-carnosine for medical use.
2000
Material process development for the fabrication of heterogeneous titanium structures with selective pore morphology by a hybrid additive manufacturing process
2017
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
FEA to Measure Bone Strength: A Review
2016
Micro-CT in small animal and specimen imaging
2002
Works of A. Laib being referenced
Darstellung der dreidimensionalen Geometrie von Wurzelkanälen mittels hochauflösender Computertomographie
2000
3D micro-computed tomography of trabecular and cortical bone architecture with application to a rat model of immobilisation osteoporosis
2000
Calibration of trabecular bone structure measurements of in vivo three-dimensional peripheral quantitative computed tomography with 28-μm-resolution microcomputed tomography
1999
Effects of strontium ranelate and alendronate on bone microstructure in women with osteoporosis
2011
Load transfer analysis of the distal radius from in-vivo high-resolution CT-imaging
1999
The ability of three-dimensional structural indices to reflect mechanical aspects of trabecular bone
1999
Effects of four Ni–Ti preparation techniques on root canal geometry assessed by micro computed tomography
2001
The Temporal Changes of Trabecular Architecture in Ovariectomized Rats Assessed by MicroCT
2001
Stereological measures of trabecular bone structure: comparison of 3D micro computed tomography with 2D histological sections in human proximal tibial bone biopsies
2005
Ridge number density: A new parameter for in vivo bone structure analysis
1997
Comparison of structure extraction methods for in vivo trabecular bone measurements
1999
New Model-Independent Measures of Trabecular Bone Structure Applied to In Vivo High-Resolution MR Images
2002
Dietary Essential Amino Acid Supplements Increase Bone Strength by Influencing Bone Mass and Bone Microarchitecture in Ovariectomized Adult Rats Fed an Isocaloric Low-Protein Diet
2002
OR 22 Changes in root canal geometry after preparation assessed by high resolution computed tomography
1999
Assessment of cancellous bone mechanical properties from micro-FE models based on micro-CT, pQCT and MR images
1998
Three-dimensional Analysis of Root Canal Geometry by High-resolution Computed Tomography
2000
Resolution dependency of microstructural properties of cancellous bone based on three-dimensional μ-tomography
1996
High-Resolution Three-Dimensional-pQCT Images Can Be an Adequate Basis for In-Vivo μFE Analysis of Bone
2000