Citation Impact
Citing Papers
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment
2004 Standout
Work hardening and dynamical recovery of F.C.C. metals in multiple glide
1989
Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion
2004
Particle reinforced aluminium and magnesium matrix composites
1994 Standout
Recent developments in stainless steels
2009 Standout
Effects of particles on development of microstructure and texture during rolling and recrystallisation in fcc alloys
1990
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
2009 Standout
Equal channel angular extrusion: from macromechanics to structure formation
1999
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Deformation twinning in Al-4.8 wt% Mg
1988
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Deformation mode and plastic flow in ultra fine grained metals
2005
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Microband-induced plasticity in a high Mn–Al–C light steel
2008
Microscopic Strain Mapping Using Scanning Electron Microscopy Topography Image Correlation at Large Strain
2005
Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion
1997
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
The physics of fatigue crack initiation
2012
Deformation twinning
1995 Standout
Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing
2005
New Methods for Severe Plastic Deformation Processing
2007
Hardening evolution of AZ31B Mg sheet
2006 Standout
Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys
2006
Severe plastic deformation: simple shear versus pure shear
2002
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
2006 Standout
Recrystallization kinetics within adiabatic shear bands
1997
Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials
1998
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Nanostructure Evolution in an Austenitic Stainless Steel Subjected to Multiple Forging at Ambient Temperature
2010
Microstructural and mechanical influences on dynamic strain aging phenomena
1994
Strain-induced grain evolution in an austenitic stainless steel under warm multiple forging
2012
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
A model for microstructure evolution in adiabatic shear bands
1998
Dislocation substructures in mild steel deformed in simple shear
1989
The morphology and crystallography of lath martensite in alloy steels
2006 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Cold deformation microstructures
1990
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP
2002
Flow stress, subgrain size, and subgrain stability at elevated temperature
1977
Microstructural simulation of dynamic recrystallization
1992
Continuous acoustic emission during intermittent plastic flow in α-brass
2012
Overview No. 76
1988
Friction stir welding and processing
2005 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Shear band formation in plane strain compression
1988
Cold work hardening in stages IV and V of F.C.C. metals—I. Experiments and interpretation
1993
Effect of initial grain size on dynamic recrystallization of copper
1983
Overview no. 96 evolution of f.c.c. deformation structures in polyslip
1992
Time-resolved strain mapping measurements of individual Portevin–Le Chatelier deformation bands
2005
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Theoretical and practical aspects of the production of thin-walled tubes by the KOBO method
2005
The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys
2016
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Dislocation microstructures and surface morphology in fatigued fine-grained copper polycrystals
2004
Fundamental aspects of low amplitude cyclic deformation in face-centred cubic crystals
1992
Grain-scale micromechanics of polycrystal surfaces during plastic straining
2003
Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel
1998
Microstructural and mechanical influences on dynamic strain aging phenomena
1994
Microband formation in shock-loaded and quasi-statically deformed metals
1989
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model
1989
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Deformation texture transition in brass: critical role of micro-scale shear bands
2000
Effects of strain localization on surface roughening during sheet forming
1998
Mechanical behavior of amorphous alloys
2007 Standout
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment
2003 Standout
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
Investigating the Portevin–Le Châtelier effect by the acoustic emission and laser extensometry techniques
2002
Overview no. 76
1988 Standout
Toward A Sound Understanding of Dislocation Plasticity
1991
Microstructural evolution in a non-cell forming metal: AlMg
1993
Microstructure development during equal channel angular drawing of Al at room temperature
1998
Current issues in recrystallization: a review
1997 Standout
Influence of deformation variables on the formation of copper-type shear bands in Al–1Mg
2001
Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel
1989
The development of microstructure and the influence of processing route during equal channel angular drawing of pure aluminum
1999
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of A. Korbel being referenced
Physical Aspects of Strain Localization in Metals
1992
A new approach to the Portevin-LeCatelier effect
1976
A structural study of the influence of pressure on shear band formation
1984
The problem of the negative strain-rate sensitivity of metals under the portevin-lechatelier deformation conditions
1981
The Role of Strain Rate in the Formation of Dislocation Structure and Its Influence on the Mechanical Properties of Aluminium
1972
Effect of multipeak dynamic recrystallisation on structure of deformed and annealed copper
1989
Strain hardening of copper single crystals at high strains and dynamical recovery processes
1982
Mechanisms of plastic flow and strain hardening of CuAl single crystals at large deformations
1985
Microstructural aspects of strain localization in AlMg alloys
1986
The structure based design of metal forming operations
1995
Strain softening and instability of plastic flow in Cu-Al single crystals
1987
Formation of shear bands during cyclic deformation of aluminium
1985
Shear band formation in cold rolled Cu-6% Al single crystals
1984
Extrusion of CuZn39Pb2 Alloy by the KOBO Method
2020
Microscopic versus macroscopic aspect of shear bands deformation
1986
The temperature dependence of the saturation stress and dislocation substructure in fatigued copper single crystals
1980
Refinement and control of the metal structure elements by plastic deformation
2004
Effect of multipeak dynamic recrystallisation on structure of deformed and annealed copper
1989
Microstructural events of macroscopic strain localization in prestrained tensile specimens
1988
Plastic flow of aluminium extruded under complex conditions
2000