Citation Impact
Citing Papers
Performance of a Stand-Alone Renewable Energy System Based on Energy Storage as Hydrogen
2004
A Voltage-Behind-Reactance Model of Five-Phase Induction Machines Considering the Effect of Magnetic Saturation
2013
Detection of broken rotor bars in induction motors using state and parameter estimation
1992
Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey
2006 Standout
An Improved Islanding Detection Method for a Grid-Connected Inverter With Intermittent Bilateral Reactive Power Variation
2012
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
2008 Standout
Sensorless Inverter‐Fed Compressor Drive System Using Back‐EMF Estimator withPIDNN Torque Observer
2013
Clear Wood toward High-Performance Building Materials
2019 Standout
A review of energy sources and energy management system in electric vehicles
2012 Standout
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Review of energy storage technologies for sustainable power networks
2014 Standout
Recent Advances and Industrial Applications of Multilevel Converters
2010 Standout
AC-microgrids versus DC-microgrids with distributed energy resources: A review
2013 Standout
Direct torque and flux regulation of synchronous reluctance motor drives based on input–output feedback linearization
2009
Grid-Synchronization Stability of Converter-Based Resources—An Overview
2020 Standout
Smart Energy Systems for coherent 100% renewable energy and transport solutions
2015 Standout
Sensorless Control of Induction Machines—With or Without Signal Injection?
2006
A review of sensorless control methods for AC motor drives
2018 Standout
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
2015 Standout
Adaptive population extremal optimization-based PID neural network for multivariable nonlinear control systems
2018 Standout
High-Bandwidth Sensorless Algorithm for AC Machines Based on Square-Wave-Type Voltage Injection
2011
Power Management of a Stand-Alone Wind/Photovoltaic/Fuel Cell Energy System
2008
Modeling and Control of a Modular Multilevel Converter-Based HVDC System Under Unbalanced Grid Conditions
2012 Standout
“Active Flux” DTFC-SVM Sensorless Control of IPMSM
2009
The technical and economic implications of integrating fluctuating renewable energy using energy storage
2012
Sequential deposition and electroforming of metal–ceramic composites for thermal management applications
2007
A Survey on Neutral-Point-Clamped Inverters
2009 Standout
Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage
2018 Standout
Analysis of Phase-Locked Loop Low-Frequency Stability in Three-Phase Grid-Connected Power Converters Considering Impedance Interactions
2014 Standout
Can Li-Ion batteries be the panacea for automotive applications?
2016
A Hybrid AC/DC Microgrid and Its Coordination Control
2011 Standout
The results do mesh
2007
A current and future state of art development of hybrid energy system using wind and PV-solar: A review
2008
Model Reference Adaptive Control of Five-Phase IPM Motors Based on Neural Network
2011
Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles
2012 Standout
Asynchronous Performance Analysis of a Single-Phase Capacitor-Start, Capacitor-Run Permanent Magnet Motor
2005
Virtual-Impedance-Based Control for Voltage-Source and Current-Source Converters
2014
Development of a computer program to locate potential sites for pumped hydroelectric energy storage
2009
A review of energy storage technologies for wind power applications
2012 Standout
Structure–property–function relationships of natural and engineered wood
2020 Standout
Pumped hydro energy storage system: A technological review
2015
Microgrids: A review of technologies, key drivers, and outstanding issues
2018 Standout
Sensorless Control of Synchronous Reluctance Motors Based on Extended EMF Models Considering Magnetic Saturation With Online Parameter Identification
2006
Electric vehicles and smart grid interaction: A review on vehicle to grid and renewable energy sources integration
2014 Standout
An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors
2003
Review of Power Sharing Control Strategies for Islanding Operation of AC Microgrids
2015 Standout
Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
2011 Standout
Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles
2008 Standout
Automotive DC-DC bidirectional converter made with many interleaved buck stages
2006
Electrophoretic deposition: From traditional ceramics to nanotechnology
2008 Standout
Optically Transparent Wood: Recent Progress, Opportunities, and Challenges
2018
A High-Performance PWM Algorithm for Common-Mode Voltage Reduction in Three-Phase Voltage Source Inverters
2010
A techno-economical assessment of solar/wind resources and hydrogen production: A case study with GIS maps
2019
Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review
2005 Standout
Emerging Power Quality Challenges Due to Integration of Renewable Energy Sources
2016 Standout
Optimization methods applied to renewable and sustainable energy: A review
2011 Standout
A Detailed Model of Induction Machines With Saturation Extendable for Fault Analysis
2004
The lithium-ion battery: State of the art and future perspectives
2018 Standout
Hydrogen Production From Water Electrolysis: Current Status and Future Trends
2011 Standout
A five-phase induction machine model using multiple DQ planes considering the effect of magnetic saturation
2014
Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed
2006
Direct Torque Control of PWM Inverter-Fed AC Motors—A Survey
2004 Standout
Implementation and Experimental Investigation of Sensorless Speed Control With Initial Rotor Position Estimation for Interior Permanent Magnet Synchronous Motor Drive
2005
Electrical energy storage systems: A comparative life cycle cost analysis
2014 Standout
Use of hybrid MCDM methods for site location of solar-powered hydrogen production plants in Uzbekistan
2022 Standout
Industrial Applications of the Kalman Filter: A Review
2013 Standout
Reviewing EnergyPLAN simulations and performance indicator applications in EnergyPLAN simulations
2015 Standout
A review of wind energy technologies
2005 Standout
Trends in Microgrid Control
2014 Standout
Advances in Diagnostic Techniques for Induction Machines
2008 Standout
A New Carrier-Based PWM Providing Common-Mode-Current Reduction and DC-Bus Balancing for Three-Level Inverters
2007
Works of A. Consoli being referenced
Lasing optical cavities based on macroscopic scattering elements
2017
Industry application of zero-speed sensorless control techniques for PM synchronous motors
2001
Identification of an Induction Motor by a Microcomputer based Structure
1985
Compact, Reliable Efficiency: A Multiphase dc/dc Converter for Automotive Dual-Voltage Power Systems
2004
Reduction of common-mode currents in PWM inverter motor drives
1999
An improved model of saturated induction machines
1990
The Future of Electronic Power Processing and Conversion
2005
Special Feature The Future of Electronic Power Processing and Conversion
2005
A new zero-frequency flux-position detection approach for direct-field-oriented-control drives
2000
Analysis of permanent magnet synchronous motors
1991
An improved model of saturated induction machines
2003
Low- and zero-speed sensorless control of synchronous reluctance motors
1999
Sensorless torque control of SyncRel motor drives
2000
A logistical model for performance evaluations of hybrid generation systems
1998
Transient analysis of integrated diesel-wind-photovoltaic generation systems
1999
A robust adaptive controller for PM motor drives in robotic applications
1995
An innovative direct self-control scheme for induction motor drives
1997
Sensorless vector and speed control of brushless motor drives
1994
Speed- and Current-Sensorless Field-Oriented Induction Motor Drive Operating at Low Stator Frequencies
2004