Citation Impact
Citing Papers
Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties
2013
One-part alkali-activated materials: A review
2017 Standout
Innovative methodology for comprehensive utilization of iron ore tailings
2009 Standout
Towards sustainable concrete
2017 Standout
Quick monitoring of pozzolanic reactivity of waste ashes
2009
Strong tough hydrogels via the synergy of freeze-casting and salting out
2021 StandoutNature
Composition and density of nanoscale calcium–silicate–hydrate in cement
2007 Standout
Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography
2013
Mechanisms of cement hydration
2010 Standout
Mesostructure of Calcium Silicate Hydrate (C‐S‐H) Gels in Portland Cement Paste: Short‐Range Ordering, Nanocrystallinity, and Local Compositional Order
1996
Bond Properties of Carbon Fibers in Cementitious Matrix
1995
Strengthening of masonry arches with Textile-Reinforced Mortar: experimental behaviour and analytical approaches
2014
Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites
2000
Phase change materials integrated in building walls: A state of the art review
2014 Standout
State of Water in Hydrating Tricalcium Silicate and Portland Cement Pastes as Measured by Quasi‐Elastic Neutron Scattering
2001
Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure
2003 Standout
A bonded-particle model for rock
2004 Standout
Solubility and structure of calcium silicate hydrate
2004
Geopolymer technology: the current state of the art
2006 Standout
Advances in understanding hydration of Portland cement
2015 Standout
Activation energy based extreme value statistics and size effect in brittle and quasibrittle fracture
2006
Effects of using recycled concrete aggregates on the shrinkage of high performance concrete
2016
Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition
2010
Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review
2013 Standout
Treatments for the Improvement of Recycled Aggregate
2004
Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC)
2006
Performance enhancement of recycled concrete aggregate – A review
2015 Standout
Dependence of compressive strength on phase assemblage in cement pastes: Beyond gel–space ratio — Experimental evidence and micromechanical modeling
2013
Microstructural development of early age hydration shells around cement grains
2009
An environmental evaluation of geopolymer based concrete production: reviewing current research trends
2011 Standout
Industrially interesting approaches to “low-CO2” cements
2004 Standout
Cement reinforced with short carbon fibers: a multifunctional material
2000 Standout
Sodium silicate-based alkali-activated slag mortars
2000
Strength optimization of “tailor-made cement” with limestone filler and blast furnace slag
2004
Interfacial transport in porous media: Application to dc electrical conductivity of mortars
1995
Biological materials: Structure and mechanical properties
2007 Standout
The Instantaneous Apparent Activation Energy of Cement Hydration Measured Using a Novel Calorimetry‐Based Method
2012
Fracture simulations of concrete using lattice models: Computational aspects
1997
Review of convective heat transfer enhancement with nanofluids
2009 Standout
Modifications in water resistance and engineering properties of β-calcium sulphate hemihydrate plaster-superplasticizer blends
2015
Microscopic physical basis of the poromechanical behavior of cement-based materials
2004
Drying shrinkage of cement paste as measured in an environmental scanning electron microscope and comparison with microstructural models
1997
A Determination of Hydration Mechanisms for Tricalcium Silicate Using a Kinetic Cellular Automaton Model
2008
States of water in hydrated C3S (tricalcium silicate) as a function of relative humidity
2006
Self-monitoring in carbon fiber reinforced mortar by reactance measurement
1997
Mercury porosimetry
2000 Standout
Present trends in the mechanics of cement based fibre reinforced composites
1987
Density and water content of nanoscale solid C–S–H formed in alkali-activated slag (AAS) paste and implications for chemical shrinkage
2011
A comprehensive review on the applications of coal fly ash
2014 Standout
Advances in understanding alkali-activated materials
2015 Standout
Modelling of the microstructure and transport properties of concrete
1996
Developments on vegetable fibre–cement based materials in São Paulo, Brazil: an overview
2004
Study on the Hole Conduction Phenomenon in Carbon Fiber-Reinforced Concrete
1998 Standout
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
The use of nitrogen adsorption to assess the microstructure of cement paste
2001
Microstructure of Hardened Cement Paste—A New Interpretation
1993
Dynamic tensile testing of fabric–cement composites
2010
Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc
2007
FRACTURE PROCESS OF THE INTERFACIAL ZONE BETWEEN A STEEL FIBER AND CEMENTITIOUS MATRIX IN RELATION TO THE TOUGHNESS OF STEEL FIBER REINFORCED MORTARS
1994
Flexural and tensile strength developments of various shape carbon fiber-reinforced lightweight cementitious composites
1998
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
2005
Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)
2013
Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay
2012
Mineralogy and microstructure of sintered lignite coal fly ash☆
2002
Mechanism of sulfate attack: A fresh look
2002
Effects of Temperature and of the Addition of Accelerating and Retarding Agents on the Kinetics of Hydration of Tricalcium Silicate
2000
Incorporation of phase change materials in cementitious systems via fine lightweight aggregate
2012
Probing the effect of superplasticizer adsorption on the surface forces using the colloidal probe AFM technique
2004
Multi-scale performance of carbon microfiber reinforced cement-based composites exposed to a decalcifying environment
2010
Simulation of cement hydration and the connectivity of the capillary pore space
1996
Effect of temperature on the hydration of Portland cement blended with siliceous fly ash
2013
Use of clay as a cement replacement in mortar and its chemical activation to reduce the cost and emission of greenhouse gases
2012
Crack propagation in concrete composites influenced by interface fracture parameters
1998
Biofibres and biocomposites
2007 Standout
Force measurements with the atomic force microscope: Technique, interpretation and applications
2005 Standout
Hydration of Hybrid Alkaline Cement Containing a Very Large Proportion of Fly Ash: A Descriptive Model
2016
Mercury porosimetry of hardened cement pastes
1999
Strength and reliability of carbon-fiber-reinforced cement composites
1994
Measuring the eco-efficiency of cement use
2010
Cements in the 21 st century: Challenges, perspectives, and opportunities
2017
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
2018 Standout
Influence of Recycled Aggregate on Interfacial Transition Zone, Strength, Chloride Penetration and Carbonation of Concrete
2003
High strength concrete containing natural pozzolan and silica fume
2000
Mechanical strength and drying shrinkage properties of concrete containing treated coarse recycled concrete aggregates
2014
Cement substitution by a combination of metakaolin and limestone
2012 Standout
In Situ Quasi-elastic Neutron Scattering Study of the Hydration of Tricalcium Silicate
1998
A microstructural approach to adherence mechanism of poly(vinyl alcohol) modified cement systems to ceramic tiles
2006
An overview of advances in biomass gasification
2016 Standout
Refinements to colloid model of C-S-H in cement: CM-II
2008 Standout
Improving the Strain-Sensing Ability of Carbon Fiber-Reinforced Cement by Ozone Treatment of the Fibers
1998
In situ quasi-elastic scattering characterization of particle size effects on the hydration of tricalcium silicate
2004
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
2013 Standout
A neutron scattering study of the role of diffusion in the hydration of tricalcium silicate
2002
Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete
2013 Standout
Supplementary cementitious materials
2011 Standout
Nanotechnology in concrete – A review
2010 Standout
Advances in alternative cementitious binders
2010 Standout
Properties of Calcined Clay Waste and its Influence on Blended Cement Behavior
2008
Mechanical properties of recycled aggregate concrete under uniaxial loading
2004 Standout
Chemoporoplasticity of Calcium Leaching in Concrete
1999
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
2011
Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials
2018 Standout
Fracture and fatigue of natural fiber-reinforced cementitious composites
2009
Compressive behaviour of concrete at high strain rates
1991 Standout
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
2013 Standout
Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags
2010 Standout
Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone
2003
Effect and mechanism of surface-coating pozzalanics materials around aggregate on properties and ITZ microstructure of recycled aggregate concrete
2009
Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash
2010 Standout
Colloid model of C−S−H and implications to the problem of creep and shrinkage
2004
Effect of the Transition Zone on the Elastic Moduli of Mortar
1998
Interfacial transition zones in recycled aggregate concrete with different mixing approaches
2012
Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing
2012 Standout
Sodium silicate-based, alkali-activated slag mortars
2002
Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures
2011
Phosphogypsum as a construction material
2017 Standout
Impact resistance of fiber reinforced concrete at subnorma temperatures
1998
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation
2013
Early hydration and setting of oil well cement
2010
Determination of the Neutron Scattering Contrast of Hydrated Portland Cement Paste using H2O/D2O Exchange
1998
Ozone treatment of carbon fiber for reinforcing cement
1998
Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress
2013 Standout
A model for the microstructure of calcium silicate hydrate in cement paste
2000 Standout
A colloidal interpretation of chemical aging of the C-S-H gel and its effects on the properties of cement paste
2005
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
2005 Standout
Fiber-reinforced cement based composites under tensile impact
1994
A porosimetric study of calcium sulfoaluminate cement pastes cured at early ages
2006
Behaviour of carbon fiber reinforced cement composites in direct tension
1993
New cements for the 21st century: The pursuit of an alternative to Portland cement
2011 Standout
The role of inorganic polymer technology in the development of ‘green concrete’
2007 Standout
The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling
2003 Standout
Fiber-reinforced tough hydrogels
2014
State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM)
2018 Standout
Application of depth-sensing microindentation testing to study of interfacial transition zone in reinforced concrete
2000
On the use of nanoindentation for cementitious materials
2003
Characterization and Modeling of Pores and Surfaces in Cement Paste
2008
Works of A. Bentur being referenced
Microstructure and properties of expansive cement mortar with silica fume
1992
Geometrical characteristics and efficiency of textile fabrics for reinforcing cement composites
2000
Technical notes: The fracture of wood fibre reinforced cement
1982
The microstructure of the steel fibre-cement interface
1985
Influence of cement paste matrix properties on the autogenous curing of high-performance concrete
2003
Quantitative characterization of the transition zone in high strength concretes
1988
Creep and drying shrinkage of calcium silicate pastes III. A hypothesis of irreversible strains
1979
Effect of curing temperature on the pore structure of tricalcium silicate pastes
1980
The microstructure and ageing of cellulose fibre reinforced cement composites cured in a normal environment
1989
The microstructure and ageing of cellulose fibre reinforced autoclaved cement composites
1989
Fabric structure and its reinforcing efficiency in textile reinforced cement composites
2003
Mechanical properties and pore structure of carbon fiber reinforced cementitious composites
1994
The Contribution of the Transition Zone to the Strength of High Quality Silica Fume Concretes
1987
Reactions and early-age properties inin-situ polymerized gypsum-acryl amide composites
1996
Gypsum of improved performance using blends with Portland cement and silica fume
1994
Mechanisms and processes leading to changes in time in the properties of CFRC
1996
Properties of cementitious systems containing silica fume or nonreactive microfillers
1994
Effect of lightweight fly ash aggregate microstructure on the strength of concretes
1997
Microhardness testing of cementitious materials
1996
Chemical Composition of C‐S‐H Gel Formed in the Hydration of Calcium Silicate Pastes
1979
Woven fabric reinforcement of cement matrix
1994
Cement reinforced with steel wool
1987
Cementitious Materials—Nine Millennia and A New Century: Past, Present, and Future
2002
Creep and drying shrinkage of calcium silicate pastes II. Induced microstructural and chemical changes
1978
Effect of Gypsum on the Hydration and Strength of C 3 S Pastes
1976
Influence of Mixture Proportions and Curing Conditions on Compressive Strength of High-Performance Concrete
2000
Revisiting the protected paste volume concept for internal curing of high-strength concretes
2011
Impact testing of concrete using a drop-weight impact machine
1989
Durability of Portland Cement-Silica Fume Pastes in Magnesium and Sodium Sulfate Solutions
1988
Materials science of concrete IV
1995
Durability of Glass‐Fiber‐Reinforced Cements with Different Alkali‐Resistant Glass Fibers
1985
The influence of microfillers on enhancement of concrete strength
1993
Effect of matrix composition on the aging of CFRC
1995
Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates
2001
The Pore Structure of Hydrated Cementitious Compounds of Different Chemical Composition
1980
Role of Interfaces in Controlling Durability of Fiber-Reinforced Cements
2000
Impact behaviour of concrete beams
1987
Structural Properties of Calcium Silicate Pastes: II, Effect of Curing Temperature
1979
Cracking processes in steel fiber reinforced cement paste
1985
Characterization of the microstructure and strength of cement paste by microhardness testing
1996
Effect of Condensed Silica Fume on the Microstructure of the Interfacial Zone in Portland Cement Mortars
1987
Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength
1996
Bond Effects in High-Strength Silica Fume Concretes
1989
The behaviour of concrete under impact loading: Experimental procedures and method of analysis
1986
A review of the work of the RILEM TC 159-ETC: Engineering of the interfacial transition zone in cementitious composites
2000
Minimum cement content requirements: a must or a myth?
2008
Carbon Fiber Reinforced Cement and Mortar
1990
Structural Properties of Calcium Silicate Pastes: I, Effect of the Hydrating Compound
1979