Citation Impact
Citing Papers
One-part alkali-activated materials: A review
2017 Standout
The technological and economic prospects for CO2 utilization and removal
2019 StandoutNature
A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel‐Coated Mesh for Oil/Water Separation
2011 Standout
FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples
2002
Towards sustainable concrete
2017 Standout
Joule-heated graphene-wrapped sponge enables fast clean-up of viscous crude-oil spill
2017 Standout
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Workability and strength of lignite bottom ash geopolymer mortar
2009
Sorption kinetics of heavy oil into porous carbons
2002
Biphasic, triphasic and multiphasic calcium orthophosphates
2011
Nanoscale hydroxyapatite particles for bone tissue engineering
2011 Standout
Alkali-activated materials
2017 Standout
The influence of mineralogical composition on the colour of clay body
2010
Calcium Orthophosphates as Bioceramics: State of the Art
2010
Geopolymer concrete: A review of some recent developments
2015 Standout
One‐Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
2014
Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags
2010
Alkaline Activation of Ceramic Waste Materials
2013
An environmental evaluation of geopolymer based concrete production: reviewing current research trends
2011 Standout
Physical, thermal and mechanical properties of adobes stabilized with fonio (Digitaria exilis) straw
2019 Standout
Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods
2008
Preparation, characterisation and in-vitro biocompatibility study of a bone graft developed from waste bovine teeth for bone regeneration
2019
Production of nepheline/quartz ceramics from geopolymer mortars
2012
Advances in understanding alkali-activated materials
2015 Standout
Substituted hydroxyapatites for bone regeneration: A review of current trends
2016
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
2010 Standout
Alkaline solution/binder ratio as a determining factor in the alkaline activation of aluminosilicates
2012
Global strategies and potentials to curb CO2 emissions in cement industry
2012
Heavy oil sorption and recovery by using carbon fiber felts
2002
Evaluation of spray-dried sludge from drinking water treatment plants as a prime material for clinker manufacture
2010
The effect of heat treatment on the mechanical and structural properties of one-part geopolymer-zeolite composites
2016
Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin
2010
Reuse options for coal fired power plant bottom ash and fly ash
2014 Standout
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
2014 Standout
A review on thermophysical evaluation of alkali-activated geopolymers
2014
A review on preparation, characterization, properties and applications of nanofluids
2016 Standout
Effect of nano-silica in concrete; a review
2021 Standout
Measuring the eco-efficiency of cement use
2010
Clay reactivity: Production of alkali activated cements
2013
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
The composition, recycling and utilisation of Bayer red mud
2018 Standout
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
2018 Standout
Management and valorisation of wastes through use in producing alkali‐activated cement materials
2016
Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments
2021 Standout
Utilisation of sludge waste from water treatment for ceramic products
2013 Standout
Technical and commercial progress in the adoption of geopolymer cement
2011
Advances in alternative cementitious binders
2010 Standout
Fluorescent Chemosensors Based on Spiroring-Opening of Xanthenes and Related Derivatives
2011 Standout
A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade
2016 Standout
Green concrete production with ceramic wastes and laterite
2016
Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials
2018 Standout
Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags
2010 Standout
Atomic spectrometry update. Environmental analysis
2005
A review of the multi-component utilisation of coal fly ash
2012 Standout
Calcium Orthophosphates in Nature, Biology and Medicine
2009
A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles
2012
Zeolite synthesis employing alkaline waste effluents from the aluminum industry
2002
Mechanism of geopolymerization and factors influencing its development: a review
2007 Standout
Synthesis and characterization of zeolite X obtained from kaolin for adsorption of Zn(II)
2010
CO2 emission reduction by reuse of building material waste in the Japanese cement industry
2014
Synthesis and characterization of novel solid base catalyst from fly ash
2011
Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
2013 Standout
Physiochemical characterizations of hydroxyapatite extracted from bovine bones by three different methods: Extraction of biologically desirable HAp
2008
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Characterisation of One-Part Geopolymer Binders Made from Fly Ash
2016
New cements for the 21st century: The pursuit of an alternative to Portland cement
2011 Standout
A review on how the researchers prepare their nanofluids
2013
Geopolymers and Related Alkali-Activated Materials
2014 Standout
Works of A. Barba being referenced
Characterization of silica–water nanofluids dispersed with an ultrasound probe: A study of their physical properties and stability
2012
Using spent catalyst from refinery FCC units to produce 4A-zeolite: synthesis, procedure, and kinetics
1999
Ceramic wastes as raw materials in portland cement clinker fabrication: characterization and alkaline activation
2006
Liquid suction by porous ceramic materials 4: influence of firing conditions
1999
Synthesis and mechanical behaviour of chlorapatite and chlorapatite/β-TCP composites
2006
Synthesis Mechanism of an Iron–Chromium Ceramic Pigment
2000
Ceramic wastes as alternative raw materials for Portland cement clinker production
2008
Chemical Characterisation of Geological Raw Materials Used in Traditional Ceramics
2004
Geopolymeric binders with different fine fillers — Phase transformations at high temperatures
2009
Estructuras cristalinas de los silicatos y óxidos de las materias primas cerámicas
1994
Sintering of (Cu 0.25 Ni 0.25 Zn 0.50 )Fe 2 O 4 Ferrite
2004
Effect of sodium addition on the preparation of hydroxyapatites and biphasic ceramics
2006
Alkaline activation of metakaolin–fly ash mixtures: Obtain of Zeoceramics and Zeocements
2007