Citation Impact
Citing Papers
The mechanical properties of natural materials. I. Material property charts
1995
Development of Stellite alloy composites with sintering/HIPing technique for wear-resistant applications
2005
Microstructure Evolution in Ferritic Stainless Steels during Large Strain Deformation
2004
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Mechanical and chemical recycling of solid plastic waste
2017 Standout
Sources and properties of non-exhaust particulate matter from road traffic: A review
2008 Standout
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
2018 Standout
Formation and growth of calcium phosphate on the surface of oxidized Ti–29Nb–13Ta–4.6Zr alloy
2003
Synthesis and properties of crosslinked recombinant pro-resilin
2005 StandoutNature
Development of new metallic alloys for biomedical applications
2012 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser material processing
2011 Standout
Bonding of silicon wafers for silicon-on-insulator
1988 Standout
Recent developments in stainless steels
2009 Standout
Cavitation erosion resistance of stainless steel laser-clad with WC-reinforced MMC
2002
On the bifurcation of cone cracks in glass plates
1996
Creep behaviour of hot isostatically pressed niobium alloy powder compacts
1982
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers
2013
Mechanisms of High Strain-Rate Superplasticity of Al-14 mass%Ni-14 mass%Mm (Misch Metal) Alloy Produced from Amorphous Powder
1995
Mechanical properties of a crab shell
1975
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Mechanical properties and features of erosion of cermets
2001
Inverse Hall–Petch behavior in diamantane stabilized bulk nanocrystalline aluminum
2012
The development of fine structure superplasticity in cast ultrahigh carbon steels through thermal cycling
1979
An in situ X ray diffraction study of the kinetics of the Ni2SiO4 olivine‐spinel transformation
1990 StandoutNobel
Biological materials: Structure and mechanical properties
2007 Standout
Characterisation and corrosion performance of laser-melted 3CR12 steel
2005
Mechanical properties of nanocrystalline materials
2005 Standout
Laser surface modification of UNS S31603 stainless steel. Part II: cavitation erosion characteristics
2000
Practical estimation of erosion damage caused by solid particle impact
2005 Standout
United Plates of America, The Birth of a Craton: Early Proterozoic Assembly and Growth of Laurentia
1988 Standout
Effect of variable intensity ultraviolet radiation on passivity breakdown of AISI Type 304 stainless steel
2000
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Wear–corrosion behavior of biocompatible austenitic stainless steels
2000
Sintering dense nanocrystalline ceramics without final-stage grain growth
2000 StandoutNature
Superplasticity—Recent advances and future directions
1989 Standout
Nanostructure formation on the surface of railway tracks
2001 Standout
Mechanical properties of a crustacean exoskeleton
1975
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Deformation mechanisms during low-and high-temperature superplasticity in 5083 Al-Mg alloy
2002
Creep mechanism in Mg2GeO4: Effects of a phase transition
1981
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
2014 StandoutScience
Chitin metabolism in insects: structure, function and regulation of chitin synthases and chitinases
2003 Standout
The analysis of defect structures and substrate/film interfaces of diamond thin films
1990 StandoutNobel
Chitin and chitosan polymers: Chemistry, solubility and fiber formation
2009 Standout
Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems
1998 Standout
Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials
1998
Friction Stir Processing Technology: A Review
2008 Standout
Laser surface melting and alloying of type 304L stainless steel
1995
Steels for bearings
2011 Standout
A meshfree method based on the peridynamic model of solid mechanics
2005 Standout
Self-healing polymeric materials: A review of recent developments
2008 Standout
Practical estimation of erosion damage caused by solid particle impact
2005 Standout
High-strain-rate superplasticity from nanocrystalline Al alloy 1420 at low temperatures
2001
Biochemistry of Insect Cuticle
1979
Cavitation erosion resistance of AISI 420 martensitic stainless steel laser-clad with nickel aluminide intermetallic composites and matrix composites with TiC reinforcement
2006
Using Equal-Channel Angular Pressing for the Production of Superplastic Aluminum and Magnesium Alloys
2004
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites
2004
The influence of thermomechanical processing variables on superplasticity in a High-Mg, Al-Mg alloy
1986
Influence of chromium on superplasticity in ultra-high carbon steels
1978
Friction stir welding and processing
2005 Standout
Physical and mechanical properties of the B2 compound NiAl
1993
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Wear characteristics of Ti–Nb–Ta–Zr and Ti–6Al–4V alloys for biomedical applications
2004
Cavitation erosion and pitting corrosion of laser surface melted stainless steels
1998
Serial Elastic Elements in the Damselfly Wing: Mobile Vein Joints Contain Resilin
1999
Superplastic behaviour of commercial duplex stainless steel SAF 2304
1999
Superplasticity of ultrafine-grained Al–Mg–Sc–Zr alloy
2016
Bulk nanostructured materials from severe plastic deformation
2000 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Cavitation erosion and pitting corrosion behaviour of laser surface-melted martensitic stainless steel UNS S42000
2000
The mechanical properties of superplastic materials
1982
Superplasticity and superplastic forming processes
1985
Laser surface modification of UNS S31603 stainless steel using NiCrSiB alloy for enhancing cavitation erosion resistance
1998
Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy
2005
Nature’s hierarchical materials
2007 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Superplasticity in aluminium-silicon eutectic
1979
Observations on regenerated chitin films
1973
Superplasticity in the ternary eutectic alloys AL-33WT%CU-7WT%MG and AL-25WT%CU-11WT%MG
1973
Laser surfacing of S31603 stainless steel with engineering ceramics for cavitation erosion resistance
2001
Microstructures and properties of high-entropy alloys
2013 Standout
Exploration of TiNi shape memory alloy for potential application in a new area: tribological engineering
2000
Cavitation erosion mechanism of S31600 stainless steel laser surface-modified with unclad WC
2003
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
An investigation of the tribological behaviour of a high-nitrogen CrMn austenitic stainless steel
1998
Mechanical behavior of amorphous alloys
2007 Standout
Investigation of fiber configurations of chafer cuticle by SEM, mechanical modeling and test of pullout forces
2004
Thermal and microchemical investigation of automotive brake pad wear residues
2004
Grain-boundary sliding and its accommodation during creep and superplasticity
1976
On mylonites in ductile shear zones
1980
Effect of hard second phase on cavitation erosion of Fe–Cr–Ni–C alloys
2004
Improvement of cavitation erosion resistance of AISI 316 stainless steel by laser surface alloying using fine WC powder
2002
Laser surface modification of UNS S31603 stainless steel. Part I: microstructures and corrosion characteristics
2000
Development of Superplastic Structural Ceramics
1990
Deformation behaviour of chromium sheets in mechanical and laser bending
2002
Room temperature ductility of NiAl-strengthened ferritic steels: Effects of precipitate microstructure
2012
Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy
2007
Mechanical, Chemical and Tribological Properties of the Nickel‐free High‐Nitrogen Steel X13CrMnMoN18‐14‐3 (1.4452)
2002
Electron microscopy of ‘giant’ platelets on cube planes in diamond
1976
High strain rate superplasticity in microcrystalline and nanocrystalline materials
2000
Hydrodynamical behaviour of a two-phase superplastic alloy: α/β brass
1980
The deformation mechanisms of superplasticity
1972
Grain boundaries as sinks for dislocations
1970
A review on basalt fibre and its composites
2015 Standout
Effects of σ phase in stainless steels on corrosive wear behavior in sulfuric acid
2001
Review: Processing of metals by equal-channel angular pressing
2001
Review of progress in shape-memory polymers
2007 Standout
Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
2014 Standout
Low temperature superplasticity of AZ91 magnesium alloy with non-equilibrium grain boundaries
1999
Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution
2000
Works of A. Ball being referenced
On the importance of work hardening in the design of wear-resistant materials
1983
Cavitation erosion of stainless steels
1982
On the abrasive wear behaviour of mineral filled polypropylene
1996
Tensile fracture characteristics of heavily drawn chromium
1970
The abrasive-corrosive wear of stainless steels
1981
Superplasticity in the Aluminium–Zinc Eutectoid
1969
Recent observations of the erosion of hard materials
1988
Synergistic abrasive—corrosive wear of chromium containing steels
1989
Mechanisms of cavitation erosion of TiAl-based titanium aluminide intermetallic alloys
1996
On the synergistic effects of abrasion and corrosion during wear
1983
The ductile/brittle transition for chromium pressurized at 10–25 kbars
1969
Cavitation erosion of cobalt-based Stellite® alloys, cemented carbides and surface-treated low alloy steels
1981
Unusual lattice defects in non-stoichiometric NiAl
1969
On the abrasive-corrosive wear of aluminium alloys
1992
Ductility in high-chromium super-ferritic alloys—II. Plastic deformation and crack-zone shielding
1991
Microstructure, phase equilibria, and transformations in corrosion resistant dual phase steel designated 3CR12
1987
The Influence of Inclusions on the Corrosion Behavior of a 12 wt% Chromium Steel
1991
The tensile fracture of quartz crystals
1976
On the structure and mechanical properties of beetle shells
1973
Dry sliding wear of particulate-reinforced aluminium alloys against automobile friction materials
1995
An investigation of the early stages of the precipitation of nitrogen in chromium
1973
An assessment of the properties and degradation behaviour of glass-fibre-reinforced polyester polymer concrete
2000
The erosion of four materials using seven erodents — towards an understanding
1999
The effect of grinding direction on the nature of the transfer film formed during the sliding wear of ultrahigh molecular weight polyethylene against stainless steel
1991
On the deformation of quartzite
1978